User Manual LG LFXS28968D 27.9-cu ft French Door Refrigerator

Documents for LG Electronics LFXS28968D

The following documents are available:
User Manual Photos
LFXS28968D photo
FRANÇAISENGLISH ESPAÑOL
OWNER'S MANUAL
FRENCH DOOR
REFRIGERATOR
Read this owner's manual thoroughly before operating the appliance
and keep it handy for reference at all times.
LFXS28968* LMXS28626* LFXS28566*
MFL68680458
Rev.03_112317
www.lg.com
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Loading ...
Loading ...
Loading ...

Specifications

LG Electronics LFXS28968D Questions and Answers


#1 Why do I hear a buzzing noise from my refrigerator periodically?

This may happen if you do not have a water source attached to your refrigerator and the icemaker is turned on. If you do not have a water source attached to the back of the refrigerator you should turn the icemaker off.

#2 My refrigerator is powered on and the controls are working, but it’s not cooling and the display shows “OFF” (see below). What is wrong?

The refrigerator is in Demo Mode. This mode disables cooling to save energy while the appliance is on display in a store. To restore normal operation, press and hold the Refrigerator and Ice Plus buttons for 5 seconds or until you hear a beep and the temperature settings appear on the display. Use the same procedure to return the refrigerator to Demo Mode, if desired.

#3 What are the best temperature settings for my refrigerator and freezer?

The default setting for the refrigerator is 37° Fahrenheit (3° Celsius). The default setting for the freezer is 0° Fahrenheit (-18° Celsius). Adjust these settings as necessary to keep food at desired temperatures. Milk should be cold when stored on the inner shelf of the refrigerator. Ice cream should be firm and ice cubes should not melt in the freezer. To switch the display from Fahrenheit to Celsius, press and hold the Freezer and Refrigerator buttons until you hear a beep and the settings in the display change.

#4 Why does the icemaker tray look crooked?

This is a normal part of the icemaker cycle. The icemaker tray may appear level or with a slight tilt. The change in position is to assist in the freezing process

#5 How do I set the refrigerator and freezer temperatures?

Continually press the Refrigerator or Freezer button on the control panel until the desired temperature appears. The numbers will cycle from highest to lowest and then return to the highest again with continuous pressing