Loading ...
Loading ...
Loading ...
Features of your vehicle
364
Recalling positions from memory
1. The shift lever is in P or N with one
of the condition below:
- The ignition switch in the ON
position or engine running.
- The ignition switch in the
LOCK/OFF or ACC position
while the driver's door is opened.
- The ignition switch in the
LOCK/OFF or ACC position and
within 30 seconds after the driver's
door was closed.
2. Press the desired memory button
(1 or 2).The system will beep once,
then the driver’s seat will automati-
cally adjust to the stored position.
Adjusting the control switch for the
driver seat while the system is recall-
ing the stored position will cause the
movement to stop and move in the
direction that the control switch is
moved.
✽✽
NOTICE
When recalling an adjustment mem-
ory button while sitting in the vehi-
cle, you can be surprised by the set-
ting chosen if the memory has been
adjusted by someone else. If that
occurs, immediately push the seat
position control knob in the direc-
tion of the desired position to stop
further undesired movement.
Easy access function
(if equipped)
With the shift lever in the P position,
the system will move the driver's seat
automatically as follows:
- It will move the driver’s seat rear-
ward when the engine start/stop
button is turned to the OFF position
and front driver’s door is opened.
- It will move the driver’s seat for-
ward when the engine start/stop
button is turned to the ACC or
START position.
You can activate or deactivate this
feature. Refer to "User settings" in
chapter 4.
Loading ...
Loading ...
Loading ...