Loading ...
Loading ...
Loading ...
452968
• With GentleClose door system, rotate the stoppers
back by 90°(Figure 2).
• Slowly close the door until the clips are pressed against
the supports / seats. At approximately 15° (relative to
the closed door position), pull the door slightly upward
and pull them out of the both hinge supports on the
appliances (Figure 3).
• Replace the door in the reverse order. Insert the door
under an angle of 15° into the hinge supports at the
front side of the appliance and push them downwards
and to the front until they slide into their supports /
seats.
• Then, completely open the door and rotate the
attachment clips back to their initial position. Slowly
close the door and check, if they close properly. If
the door does not open or close correctly, make sure
whether the hinge notches are correctly placed in their
seat hinges.
Attention
Always make sure the hinge attachment clips are fi rmly
seated in their supports when installing the door. If this
is not the case, the main hinge that is operated by a
strong spring may be released any time while installing or
removing the door. Risk of physical injury.
• Oven door is fi tted with a door lock that prevents it
from being open until the lock is released. Door lock is
opened by a slightly pressing your thumb to the right
and simultaneously pulling the door outwards.
• When the oven door is closed, the door lock
automatically returns to its initial position.
Note: If the door lock is supplied with the appliance,
attach it under the appliance control panel in compliance
with the instructions for installation, which are supplied
with the lock.
fi gure 2
fi gure 3
Door lock (only with
some models)
34
Loading ...
Loading ...
Loading ...