Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
11
NS-OTR16SS9 / NS-OTR16WH9
Step 2: Align the rear wall template
1 Use a level to make sure that the bottom of the cabinet is level.
2 Draw a vertical line down the center of the wall in the mounting space. This is where the center of your template will be.
3 Draw a horizontal line at the height of the front of your cabinet. This is where the top of your template will be. If the
bottom of your cabinet is flat, make sure that you leave space for the power cord.
4 Trim the rear wall template along the dotted line.
Note: If the rear wall template is damaged or unusable, measure and mark the wall with the dimensions at the end of this step.
Notes:
• If installing the microwave beneath smooth, flat cabinets, make sure that you leave enough space for the power cord clearance.
• If cabinets have decorative trim that interferes with the microwave installation, remove the trim to install the microwave properly
and to make sure that it is level.
Rear wall template
Power cord
Cabinet
Cabinet
Cabinet
Cabinet
W
ALL
W
ALL
W
ALL
Flat bottom:
Front overhang:
Recessed back:
Loading ...
Loading ...
Loading ...