Loading ...
Loading ...
Loading ...
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT – Save these
instructions for local inspector’s use.
•
IMPORTANT – Observe all
governing codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Refrigerator Installation
15 minutes
Reversing the Door Swing
1 hour
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
• Do not install the refrigerator where the temperature
will go below 16°C because it will not run often enough
to maintain proper temperatures.
• Install it on a floor strong enough to support it fully
loaded.
REFRIGERATOR LOCATION
Installation
Refrigerator
Instructions
Models 16, 17
Allow the following clearances for ease of installation,
proper air circulation and plumbing and electrical
connections.
• Sides 19 mm
• Top 25 mm
• Back 25 mm
CLEARANCES
If the refrigerator has an icemaker, it will have to be
connected to a cold drinking water line. A water supply
kit is available at extra cost from your dealer.
Installation of the icemaker must be done by a
qualified service technician.
WATER SUPPLY TO THE ICEMAKER
(on some models)
DIMENSIONS
Model 16 17
A* 1556 mm 1632 mm
B 711 mm 711 mm
C** 787 mm 787 mm
D 1394 mm 1394 mm
E 657 mm 657 mm
F 1346 mm 1346 mm
* Height does not include hinge—Add 22 mm for hinge.
** Depth includes handle.
11
Loading ...
Loading ...
Loading ...