Loading ...
Loading ...
Loading ...
28
Burner Caps and Heads
NOTE:
Burner caps
Lift off when cool. Wash burner caps in hot,
soapy water and rinse with clean water. You
may scour with a plastic scouring pad to
remove burned-on food particles.
Burner heads
For proper ignition, make sure the small hole in
the section that fits over the electrode is kept
open. A sewing needle or wire twist-tie works
well to unclog it.
Clogged or dirty burner ports or electrodes will
not allow the burner to operate properly.
Any spill on or around an electrode must
be carefully cleaned. Take care to not hit an
electrode with anything hard or it could be
damaged.
You should clean the burner caps and burner
heads routinely, especially after bad spillovers,
which could clog the openings in the burner
heads. Lift off when cool.
To remove burned-on food, soak the burner
heads in a solution of mild liquid detergent
and hot water for 20–30 minutes. For more
stubborn stains, use a toothbrush.
After cleaning
Before putting the burner caps and heads back,
shake out excess water and then dry them
thoroughly by setting in a warm oven for 30
minutes.
NOTE:
Replacement
Replace burner heads over the electrodes
on the cooktop, in the correct locations
according to their size.
On some models:
On some models:
Make sure the slot in the burner head is
positioned over the electrode.
Replace the matching size caps onto the heads.
Make sure that the heads and caps are
replaced in the correct locations.
NOTE: On some models, the burners are all the
same size and power.
Care and cleaning of the range.
Use a sewing needle or twist-tie
to unclog the small hole in the burner
head.
Medium head
and cap
Front of range
Large head
and cap
Small head
and cap
Large head
and cap
Medium head
and cap
Front of range
Medium head
and cap
Small head
and cap
Large head
and cap
Loading ...
Loading ...
Loading ...