Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
38
ArtNo.320-0020 Oven back fixing screws
Fit the new fan and reassemble in reverse order. Check the
operation of the oven.
5.3 To Change the Oven Element
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the oven inner back (see 5.1).
Remove the 2 screws from the top of the element and the 1
from the bottom of the element (Fig. 10.4).
Carefully lift the element out, disconnecting the terminals
connected to the element (noting their positions).
If it is not possible to disconnect the leads in this way, pull the
cooker forward to gain access to the rear, remove the screws
securing the electric cover to the back sheet, remove the cover
and disconnect the terminals from the rear.
Fit the new element and reassemble in reverse order. Check
the operation of the oven.
5.4 To Change an Oven Element Thermal Cut-out
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forwards to gain access to the cover box. Undo
the cover screws and lift clear. The cut-out is located on the
earth plate beside the oven element connections. Disconnect
the cut-out wiring. Undo the xings that secure the cut-out to
the earth plate and remove.
Fit the replacement control and re-assemble in reverse order.
5.5 To Replace an Oven Thermostat
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel and hotplate (see 1.1 & 2.1). Open
the oven door and remove the oven furniture.
Main Oven
Remove the thermostat phial cover (2 screws). Unclip the
thermostat phial from the clips in the oven back. For the left-
hand oven, pull cooker forward to gain access to the cover box
at the rear of the cooker. Remove the 4 screws securing the
cover and lift clear.
Feed the thermostat capillary out of the oven. Disconnect
the wiring from the thermostat. Remove 2screws holding
thermostat to mounting panel. Fit new thermostat and
reassemble in reverse order. Make sure that the phial is clipped
to the oven back with the phial centrally positioned between
the clips.
Check the operation of the thermostat.
Tall Oven
Remove the oven inner back xing screws and remove the
inner back. Unclip the thermostat phial from the clips on the
oven back. From the top pull the thermostat capillary up and
out. Disconnect the leads and remove the thermostat and
phial. Reassemble in reverse order.
Check the operation of thermostat.
Element fixing screws
ArtNo.321-0005 Fan oven element
Fig. 10.3
Fig. 10.4
Loading ...
Loading ...
Loading ...