Loading ...
Loading ...
Loading ...
6
Cleaning
• Wash any removable parts, the freezer
interior, and exterior with mild detergent
and warm water. Wipe dry. Do not use
harsh cleaners on these surfaces.
• Do not use razor blades or other sharp
instruments, which can scratch the ap-
pliance surface when removing adhesive
labels. Any glue left from the tape can be
removed with a mixture of warm water
and mild detergent, or touch the residue
with the sticky side of tape already re-
moved. Do not remove the serial plate.
• The freezer should be
located in the coolest area
of the room, away from
heat producing appliances
or heating ducts, and out of
direct sunlight.
Energy Saving Ideas
• Let hot foods cool to room temperature
before placing in the freezer. Overloading
the freezer forces the compressor to run
longer. Foods that freeze too slowly may
lose quality or spoil.
• Be sure to wrap foods properly, and wipe
containers dry before placing them in the
freezer. This cuts down on frost build-up
inside the freezer.
• Freezer shelves should not be lined with
aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air
circulation, making the freezer less ecient.
• Organize and label food to reduce lid
openings and extended searches. Remove
as many items as needed at one time, and
close the lid as soon as possible.
First Steps
This Use & Care Guide provides specic
operating instructions for your model. Use
the unit only as instructed in this Use & Care
Guide. Before starting the appliance, follow
these important rst steps.
Installation
• Choose a place that is near a grounded
electrical outlet. Do Not use an extension
cord or an adapter plug.
• For the most ecient operation, the freezer
should be located where surrounding
temperatures will not exceed 110°F (43°C).
Temperatures of 32°F (0°C) and below will
NOT aect freezer operation. Additional
compressor heaters are not recommended.
• Allow space around the unit for good air
circulation. Leave a 4-inch (101.6 mm)
space on all sides of the freezer for ad-
equate circulation.
Leveling
The freezer must have all bottom corners
resting rmly on a solid oor. The oor must
be strong enough to support a fully loaded
freezer. If needed, add metal or wood shims
between foot pads and oor.
NOTE
It is Very Important for your freezer to be
level in order to function properly. If the
freezer is not leveled during installation,
the lid may be misaligned and not close
or seal properly, causing cooling, frost, or
moisture problems.
Loading ...
Loading ...
Loading ...