Loading ...
Loading ...
Loading ...
User Manual BDL3231/BDL4231
8.1 CLEANING
Cautions When Using the Display
• Do not bring your hands, face or objects close to the ventilation holes of
the display. Top of display is usually very hot due to the high temperature
of exhaust air being released through the ventilation holes. Burns or
personal injuries may occur if any body parts are brought too close. Placing
any object near the top of the display could also result in heat related
damages to the object as well as the display itself.
• Be sure to disconnect all cables before moving the display. Moving the
display with its cables attached may damage the cables and thus case fire
or electric shock danger.
• Disconnect the power plug from the wall outlet as a safety precaution
before carrying out any type of cleaning or maintenance procedure.
Front Panel Cleaning Instructions
• The front of the display has been specially treated. Wipe the surface gently
using only a cleaning cloth or a soft, lint-free cloth.
• If the surface is particular dirty, soak a soft, lint-free cloth in a mild
detergent solution. Wring the cloth to remove excess liquid. Wipe the
surface of the display to remove dirt. Then use a dry cloth of the same type
to dry.
• Do not scratch or hit the surface of the panel with fingers or hard objects
of any kind.
• Do not use volatile substances such as insert sprays, solvents and thinners.
Cabinet Cleaning Instructions
• If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth.
• If the cabinet is extremely dirty, soak a lint-free cloth in a mild detergent
solution. Wring the cloth to remove as much moisture as possible. Wipe
the cabinet. Use another dry cloth to wipe over until the surface is dry.
• Do not allow any water or detergent to come into contact with the surface
of the display. If water or moisture gets inside the unit, operating problems,
electrical and shock hazards may result.
• Do not scratch or hit the cabinet with fingers or hard objects of any kind.
• Do not use volatile substances such as insert sprays, solvents and thinners
on the cabinet.
• Do not place anything made from rubber or PVC near the cabinet for any
extended periods of time.
8. CLEANING AND TROUBLESHOOTING
RETURN TO THE CONTENTS
Loading ...