Loading ...
Read the instructions, keep them safe, pass them on if you pass the kettle on.
Remove all packaging before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with
reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have
been supervised/instructed and understand the
hazards involved.
Keep the appliance and cable out of reach of
children. They must not use or play with it.
Misuse of the appliance may cause injury.
Unplug before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while
plugged in.
If the cable is damaged, return the appliance, to
avoid hazard.
H Do not use this appliance near bathtubs, showers, basins or other
vessels containing water.
• Don’t use the wand in hot oil – even moderately hot oil can cause
a nasty burn.
• Don’t try to chip ice, or chop raw meat.
• Don’t use the blender for any purpose other than those described
in these instructions.
• Don’t use the blender if it’s damaged or malfunctions.
• Never leave the blender resting in the pan because the bottom of
the pan could still be very hot and damage the blender.
• Don’t run the motor for more than 1 minute, rest it for 2 minutes
before using it again.
HOUSEHOLD USE ONLY
PARTS
1. Low (I)
2. High (II)
3. Handle
4. Wand
5. Blade
FITTING THE WAND
1. Unplug the appliance.
2. Push the wand on to the end of the handle, and turn it clockwise.
3. To remove, turn it anti-clockwise, then pull it o the handle.
USING
Generally, the wand can do anything a normal blender can do. Make
milkshakes, smoothies, or mayonnaise in a beaker. Purée ingredients
in the pan you cook them in.
• Don’t immerse the wand past its junction with the handle.
Whatever container you use, make sure it’s on a stable, at
surface, and support it with your free hand, to prevent it moving.
1. Put the plug into the power socket.
2. Press the low (I) button for low speed, release it to switch o.
3. Press the high (II) button for high speed, release it to switch o.
• Large quantities, thick mixes, and a high ratio of solids to liquids
require longer timings and slower speeds.
• Smaller quantities, thinner mixes, and more liquids than solids
require shorter timings and higher speeds.
To avoid spray/splashing:
• Keep the wand vertical.
• Don’t switch on till it’s inside the container.
• Switch o before removing it.
• With liquids, switch on and o with the blade under the surface.
HOT LIQUIDS
If blending hot liquids in a pan, always remove the pan from the heat
and allow it to cool down a little before blending.
When using in hot liquids, don’t let the blade break the surface at an
angle, you may spray hot liquid outside the container.
Don’t use the wand in hot oil. Splashes from even moderately hot oil
cause nasty burns.
CARE AND MAINTENANCE
1. Switch the blender o, and unplug it.
2. Don’t touch the blade – use a brush.
3. Wipe outer surfaces with a soft damp cloth.
4. Don’t put any part in a dishwasher.
e
f
g
i
j