Loading ...
Loading ...
Loading ...
Controls
51
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
Drivelogic: shifting modes and Drivel-
ogic driving programs, refer to page 59
> "EDC:"
Programs of the Electronic Damping
Control, refer to page 79
> "DSC:"
Dynamic Stability Control and
M Dynamic Mode, refer to page 76
> "POWER:"
Programs of the M Engine Dynamics
Control, refer to page 60
> "Head-Up display"
*
Views of the Head-up Display, refer to
page 86
You can reset all settings for MDrive to the
default values:
3. Select the desired function.
4. Press the controller.
5. Turn the controller to select the desired set-
ting.
6. Press the controller.
The setting is stored for the remote control cur-
rently in use.
Activating settings
Press the button on the steering wheel.
The indicator lamp in the instrument
cluster lights up. The settings made on
the Control Display for the functions
contained in MDrive are active.
Pressing the button again deactivates MDrive.
If the indicator lamp flashes after the but-
ton was pressed, MDrive was unable to
respond because the ABS Antilock Brake Sys-
tem or DSC Dynamic Stability Control are cur-
rently regulating driving stability. Press the
button again when the indicator lamp no
longer flashes.<
Even with MDrive activated, you can change
individual settings outside MDrive, e.g. with the
buttons in the center console. To reactivate all
settings made for MDrive on the Control Dis-
play: press the button twice.
Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG
Loading ...
Loading ...
Loading ...