Loading ...
Loading ...
Loading ...
F
Figure 5
Figure 6
Figure 7
REPAIRS
Replacing the supply cable
Turn the cooktop over and unhook the
terminal board cover by inserting a
screwdriver into the two hooks âAâ.
Open the cable gland by unscrewing
screw âFâ, unscrew the terminal screws
and remove the cable.
The new supply cable, of suitable type
and section, is connected to the termi-
nal board following the diagrams
shown below.
SECTION OF THE SUPPLY
CABLE
Use H05RR-F cables
220-240 V ~, 50/60 Hz, 2900 W (12.6 A)
section: 3 x 1,5 mm
2
A
8
WARNING: If the power supply cable
is damaged, it must be replaced only
by an authorised service agent in
order to avoid a hazard.
220-240 V
E
N
L
E Earth
N Neutral
L Live
Loading ...
Loading ...
Loading ...