Loading ...
Loading ...
Loading ...
Water Filter Cartridge
The water filter cartridge is located in the back upper right corner
of the refrigerator compartment.
When to Replace the Filter on Models With a
Replacement Indicator Light
There is a replacement indicator light for the water filter cartridge
on the dispenser. This light will turn orange to tell you that you
need to replace the filter soon.
The filter cartridge should be replaced when the replacement
indicator light turns red or if the flow of water to the dispenser or
icemaker decreases.
When to Replace the Filter on Models Without a
Replacement Indicator Light
The filter cartridge should be replaced every six months
or earlier if the flow of water to the water dispenser or icemaker
decreases.
Removing the Filter Cartridge
If you are replacing the cartridge, first remove the old one by
slowly turning it to the left. Do not pull down on the cartridge. A
small amount of water may drip down.
Installing the Filter Cartridge
If you are replacing a SmartWater cartridge with
an adapter, it must be removed before installing the
cartridge. To remove the adapter, turn it to the left about 1/4
turn.
If you are replacing a Water by Culligan cartridge,
leave the adapter in place. This adapter will stay in the
refrigerator when you replace future cartridges.
On models ithout a replacement indicator light,
apply the month and year sticker to the new cartridge to
remind you to replace the filter in six months.
Fill the replacement cartridge with water from the tap to
allow for better flow from the dispenser immediately after
installation.
Line up the arrow on the cartridge and the cartridge
holder. Place the top of the new cartridge up inside the
holder. Do not push it up into the holder.
Slowly turn it to the right until the filter cartridge stops.
DO NOT OVERTIGHTEN. As you turn the cartridge, it will
automatically raise itself into position. The cartridge will
move about 1/2 turn.
Press and hold the WATER FILTER pad (on some models) on
the dispenser for 3 seconds.
NOTE: A newly-installed water filter cartridge may cause water to
spurt from the dispenser upon first use.
Filter Bypass Plug
You must use the filter bypass plug
when a replacement filter cartridge
is not available. The dispenser and
the icemaker will not operate
without the filter or filter
bypass plug.
To use the filter bypass plug on Water by Culligan models, you
must first remove the filter adapter from the cartridge holder by
turning it to the left.
For the maximum benefit of your filtration system, GE
recommends the use of GE branded SmartWater filters only.
Using GE branded filters in GE and Hotpoint refrigerators provides
optimal performance and reliability. GE branded SmartWater
filters are always the right choice because they are patented and
designed specifically for GE products. GE SmartWater filters meet
rigorous industry NSF standards for safety and quality that are
important for products that are filtering your water. GE has not
qualified non-GE branded filters for use in GE and Hotpoint
refrigerators and there is no assurance that non-GE branded
filters meet GE’s standards for quality, performance and reliability.
If you have questions—visit our Website
at GEAppliances.com, or call 1.800.GE.CARES (1.800.432.2737).
Replacement filters:
To order additional filter cartridges in the United States,
visit our Website at GEAppliances.com, or call GE Parts and
Accessories, 800.626.2002.
See filter label for type of filter to order (MWF or MSWF)
Customers in Canada should consult the yellow pages
for the nearest Mabe Service Center.
Filter
Bypass
Plug
Filter
Bypass
Plug
SmartWater
Water by Culligan
About QuickFreeze.
™
(on some models) GEAppliances.com
The QuickFreeze plate is only to be
used with the QuickFreeze feature.
Use QuickFreeze to freeze items faster
to enhance food preservation.
How to Use
Place food (wrapped in plastic wrap)
on QuickFreeze plate. Turn the feature
on via the LCD controls.
Some LCD Models Only:
Access By: Home > Options > Freezer Options
> QuickFreeze
Activate By: Using the arrows to select
the time and pressing Enter.
Deactivate By: Pressing OFF.
NOTE: While the QuickFreeze feature is
enabled, the actual freezer temperature may
drop as low as –3°F (–19°C). This is normal.
QuickFreeze
Plate
9
About the water filter. (on some models)
Cartridge
Holder
(appearance may vary)
With adapter
Without adapter
Loading ...
Loading ...
Loading ...