Loading ...
Loading ...
Loading ...
10
CAUTION: If the iron is set
to a low temperature on
the temperature control
(i.e. synthetic or silk) and
also on any of the steam
control settings, there
may be leakage from
the soleplate. This is due
to the iron temperature
not being high enough
to vaporize the water and
create steam. Therefore,
ensure that the steam
control is always set to
correspond with the
setting on the temperature
control as seen in Table A
(see section ‘Setting the
Temperature’ page 8).
How To Use Shot Of Steam
The shot of steam provides an extra burst
of steam which is ideal for the removal
of stubborn creases or wrinkles. The shot
of steam can be used when the steam
selector is set to MIN or MAX.
Stand the iron on its heel and turn the
Temperature Control to the hottest setting
and wait for two to five minutes so that
the iron reached the set temperature
and is ready for use. Ensure the Steam
Control corresponds to the setting on the
Temperature Control.
In the ironing position, lift the iron slightly
above the surface of the fabric, press the
Shot of Steam button down firmly and
release it during ironing. An intense burst
of steam penetrates deep into the fabric.
Operating Instructions continued...
NOTE: For optimal steam quality,
wait an interval of at least 4 seconds
between presses of the Shot of
Steam button.
Vertical Steam Shot
The Vertical Steam Shot allows you to
use the iron for vertical applications. This
is especially useful for getting wrinkles
out of hanging garments, curtains, wall
hangings etc.
Hold the iron vertically, in front, a slight
distance from the item to be steamed
and press the Shot of Steam button.
CAUTION: Never use the
vertical steam shot while
clothes are on the body
or direct the steam
towards people.
Ironing Without Steam
Ensure water is in the water tank.
Turn the steam selector to MIN position to
shut off the steam flow.
Select the required setting on the
Temperature Control dial for the fabric
being ironed.
Stand the iron on its heel and wait for
2 to 5 minutes for the iron to reach the
set temperature. The iron is now ready
for use.
CAUTION: Never iron with
an empty water tank.
Water needs to be in the
water tank, even when
ironing without steam.
Loading ...
Loading ...
Loading ...