Loading ...
Loading ...
Loading ...
16 | P a g e
REMOTE CONTROL
The portable air conditioner can be switched on by the remote control. To transmit signals from
the remote control to the air conditioner, point the front part of the remote handset towards the
control panel on the air conditioner. Reception of the signal is confirmed by a beep. The
maximum signal transmission distance is approximately 8 meters / 26 feet.
NOTE:
Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.),
may cause interferences
Electronic and fluorescent lamps may interfere with the signal transmissions between the
remote control and the air conditioner
Remove the batteries if the remote control is not used for long periods
INSTALLING BATTERIES
Only use two dry LR03 AAA 1.5V Batteries (included) in the remote control
Always change both batteries at the same time
To insert the batteries, open the flap on the back of the remote control by sliding if off. Strictly
adhere to the polarity signs on the bottom of the battery housing, close the flap once the batteries
have been inserted.
INDICATOR
FUNCTION
1 Mode Indicator
Displays the current selected mode
(Auto, Cool, Dry or Fan)
2 Lock Indicator
Indicates unit is on Lock mode
3 Temp./Timer Display
Displays temperature or timer setting
4 Fan (High)
Displays the selected high fan speed
5 Fan (Low)
Displays the selected low fan speed
6 Timer Indicator
Indicates Timer mode activated
7 Up Button
Increases set temperature/time
BUTTONS
FUNCTION
8 Down Button
Decreases set temperature/time
9 Mode Button
Controls the 4 function modes:
Auto, Cool, Dry & Fan
10 On/Off Button
Turns the unit On and Off
11 Fan Speed Button
Controls the 3 fan speeds: High & Low
or Auto
12 Sleep Button
Enables Sleep mode
13 Timer On Button
Enables the On timer & set timer hours
14 Reset Button
Cancels all settings
15 Timer Off Button
Enables the Off timer & set timer hours
16 Lock Button
Locks all settings
17 LED Display Button
Turns on and off the display light
Loading ...
Loading ...
Loading ...