Loading ...
Loading ...
Loading ...
25
USA
C
There might be residues of
detergent or rinse aid in the
machine and/or on the pieces
being washed depending on
the step the program you have
cancelled was in.
6.8 SALT INDICATOR ( )
(MODEL DEPENDING)
Please check the salt indicator on the display
to see whether there is adequate amount
of softening salt in the dishwasher or not.
You need to refill the salt reservoir with
salt whenever salt indicator appears on the
display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
6.9 RINSE AID INDICATOR ( )
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or not.
You need to refill the rinse aid reservoir with
rinse aid whenever rinse aid indicator appears
on the display of your machine.
C
Pay attention not to open the
door of the machine when it is
running. There may be a rush of
vapour when you open the door
of your machine; be careful.
C
The machine will be switched
off if no button is pressed
within 5 seconds after opening
the door while the machine is
running.
C
After the door has been
opened, if any button is pressed
within 5 seconds and the door
is closed, the selected program
resumes; otherwise, the
machine will be switched off.
Open the door after the
machine has been switched off,
press On/Off button and close
the door within 5 seconds. The
program will resume washing.
C
The machine will remain silent
in pause mode for some time
in order to remove the water
from the machine and on the
dishes completely and to have
the water softener cleaned, and
then it will resume running in
drying mode.
6.7 CANCELLING THE
PROGRAM
Open the door of the product press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the 3 -
2 - 1 countdown, 0:01 is displayed, close
the door of the product and wait for the
draining process complete. Draining is
completed in 2 minutes and the machine
gives an audible warning when it is
completed.
Adjusting the amount of rinse aid
1. After switching on your machine, press
the Menu key for 1 second.
2. Using <- and +> keys, proceed to “P:”
on the display.
3. Set to the appropriate level with the
Selection key.
4. Press the Menu key to exit the settings
menu. Your setting will be saved
automatically.
No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in P:2
position.
Loading ...
Loading ...
Loading ...