1. Home
  2. LG Electronics
  3. LG Electronics 50UN7300PUF User Manual
  4. Page 31

OWNER’S MANUAL - Page 31

For 50UN7300PUF. Also, The document are for others LG Electronics models: 43UN7300PUF, 43UN7300PUC, 43UN7300AUD, 43UN7300PUD, 43UN7100PUA, 43UN7000PUB, 43UN6950ZUA, 43UN6951ZUA, 49UN7300PUC, 49UN7300PUF, 49UN7300AUD, 49UN7300PUB, 49UN7100PUA, 49UN7000PUB, 50UN8050PUD, 50UN8000PU, 50UN7300PUC, 50UN7300AUD, 50UN7300PUB, 50UN7000PUC, 50UN6950ZUF, 50UN6951ZUF, 55UN8050PUD, 55UN8000PUB, 55UN7300PUF, 55UN7300PUC, 55UN7300AUD, 55UN7300PUB, 55UN7310PUC, 55UN7100PUA, 55UN7000PUB, 55UN6950ZUA, 55UN6951ZUA, 60UN7300PUA, 60UN7310PUA, 60UN7000PUB, 60UN6950ZUA, 60UN6951ZUA, 65UN8500PUI, 65UN8500AUJ, 65UN8050PUD, 65UN8000PUB, 65UN7300PUF, 65UN7300PUC, 65UN7300AUD, 65UN7300PUB, 65UN7310PUC, 65UN7100PUA, 65UN6950ZUA, 65UN6951ZUA, 70UN6950ZUA, 70UN7370PUC, 70UN7370AUD, 70UN7370PUB, 70UN7100PUA, 70UN7070PUA, 75UN8570PUC, 75UN7370PUE, 75UN8000PUB, 75UN8570AUD, 75UN7370AUH, 75UN7370PUB, 75UN7100PUD, 75UN7070PUC, 75UN6950ZUD, 75UN6951ZUD, 75UN6970PUD, 82UN8570PUC, 82UN8570PUB, 82UN8570AUD, 82UN8070PUD, 86UN8570PUC, 86UN8570PUB, 86UN8570AUD

Loading ...
Loading ...
Loading ...
11
ENGENGLISH
11
EXTERNAL CONTROL DEVICE SETUP
2. Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
21. Channel(Programme) Add/Del(Skip)
(Command: m b)
► To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
22. Key (Command: m c)
► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
23. Control Backlight (Command: m g)
• For LCD TV / LED TV
► To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Control Panel Light (Command: m g)
• For Plasma TV
► To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
24. Input select (Command: x b)
(Main Picture Input)
► To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data
00 : DTV
02 : Satellite DTV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
01 : CADTV
10 : ATV
20 : AV or AV1 21 : AV2
40 : Component1
60 : RGB
41 : Component2
90 : HDMI1
92 : HDMI3
91 : HDMI2
93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.
25. 3D(Command: x t) (only 3D models)
(Depending on model)
► To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
* (Depending on model)
Data Structure
[Data 00] 00 : 3D On
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
[Data 01] 00 : Top and Bottom
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
[Data 02] 00 : Right to Left
01 : Left to Right
[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14
(*transmit by Hexadecimal code)
Loading ...
Loading ...