Loading ...
Loading ...
Loading ...
Customer ServiceTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
Preparing to install the refrigerator.
Read these instructions completely and carefully.
Water Supply to the Icemaker
(on some models)
If the refrigerator has an icemaker, it will have to be
connected to a cold water line.
A water supply kit (containing copper tubing,
shutoff valve, fittings and instructions) is available
at extra cost from your dealer or from Parts and
Accessories, 800-626-2002.
Refrigerator Location
Do not install the refrigerator where the
temperature will go below 60°F (16°C)
because it will not run often enough to maintain
proper temperatures.
Install it on a floor strong enough to support it
fully loaded.
Clearances
Allow the following clearances for ease of
installation, proper air circulation and
plumbing and electrical connections:
Sides . . . . . . . . . . . . . . . . . . . . . . . .1″(25 mm)
Top . . . . . . . . . . . . . . . . . . . . . . . . .1″(25 mm)
Back . . . . . . . . . . . . . . . . . . . . . . . . .1″(25 mm)
Rollers
The rollers have 3 purposes:
Rollers adjust so the door closes easily when
opened about halfway. [Front of refrigerator
should be 1/4″(6 mm) higher than the rear of
refrigerator.]
Rollers adjust so the refrigerator is firmly
positioned on the floor and does not wobble.
Rollers allow you to move the refrigerator away
from the wall for cleaning.
To adjust the rollers:
Remove the base grille.
Turn the roller
adjusting screws
clockwise to raise
the
refrigerator,
counter-
clockwise to lower it.
Use a 3/8″socket
wrench or adjustable
wrench. Replace the
base grille.
3
2
1
Base Grille
Remove the base grille
by grasping it at the
bottom and pulling it
straight out.
To replace the base
grille, align prongs on
back of grille with slots
in cabinet and push
forward until the grille
snaps into place.
Roller Adjustment Screw
(3/8″hex with slot)
Roller
Stabilizing
Brake
11
Loading ...
Loading ...
Loading ...