Brother DZ2400 Sewing Machine

User Manual - Page 16

For DZ2400. Also, The document are for others Brother models: 885-V58/V59, V68/V69

PDF File Manual, 116 pages, Read Online | Download pdf file

DZ2400 photo
Loading ...
Loading ...
Loading ...
14
KNOWING YOUR SEWING MACHINE
Power supply
a
Insert the plug into a wall outlet.
a Main power switch
b Jack/socket connector
b
Set the main power switch to “I”.
X The sewing light comes on when the
machine is turned on.
Memo
When the machine is turned on, the needle
and the feed dogs will make sound when
they move; this is not a malfunction.
c
To turn off the machine, set the main power
switch to “
{”.
X The sewing light goes off when the
machine is turned off.
Note
If a power outage occurs while the sewing
machine is being operated, turn off the
sewing machine and unplug the power
supply cord. When restarting the sewing
machine, follow the necessary procedure to
correctly operate the machine.
(For U.S.A. only)
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug.
If it still does not fit, contact a qualified
electrician to install the proper outlet. Do
not modify the plug in any way.
Foot controller
Insert the foot controller plug into its jack/socket on
the rear side of the sewing machine.
a Foot controller jack/socket
When you press the foot controller down lightly, the
machine will run at a low speed. When you press
harder, the machine’s speed will increase. When you
take your foot off the foot controller, the machine
will stop.
You should make sure that nothing is placed on the
foot controller when the machine is not in use.
Note
When the foot controller is plugged in, the
start/stop button cannot be used to start
sewing (only for models equipped with the
start/stop button).
2
1
When connecting the foot controller, be sure
to turn off the sewing machine in order to
prevent the machine from accidentally being
started.
Do not allow pieces of cloth and dust to build
up on the foot controller. Doing so could
cause a fire or an electric shock.
CAUTION
Slower
Faster
CAUTION
Loading ...
Loading ...
Loading ...