Loading ...
Loading ...
Loading ...
TL-WA901ND
300Mbps Wireless N Access Point User Guide
33
Note:
If the LAN port of TL-WA901ND is not connected to a switch but directly to a PC,
1. The PC can directly log on to the Web management page of TL-WA901ND and manage the
access point.
2. Only the wireless STA with its VLAN ID set to 1 can communicate with the wired PC.
3) Client: This mode allows the device to act as a wireless station to enable wired host(s) to
access an AP.
Figure 4-12 Wireless Settings in Client mode
Enable WDS - The AP client can connect to AP with WDS enabled or disabled. If WDS is
enabled, all traffic from wired networks will be forwarded in the format of WDS frames
consisting of four address fields. If WDS is disabled, three address frames are used. If your
AP supports WDS well, please enable this option.
Wireless Name of Root AP - If you select the radio button before Wireless Name of Root
AP, the AP client will connect to the AP according to SSID. Enter the SSID of AP that you
want to access.
MAC Address of Root AP - If you select the radio button before M AC Address of Root AP,
the AP client will connect to the AP according MAC address. Enter the MAC address of AP
that you want to access.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the device can be used. It may be illegal to use the wireless function of
the device in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
Note:
Limited by local law regulations, version for North America does not have region selection
option.
Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations
to access the device.
Click the Survey button to detect the SSIDs in the local area.
Loading ...
Loading ...
Loading ...