Loading ...
Loading ...
Loading ...
EN
9
BEFORE FIRST USE
The paragraph numbering corresponds to the numbers in the diagrams.
• Handle the sharp blades (d, f, g) carefully when emptying the bowls and when cleaning: they are extremely sharp.
• Do not touch the whisks or the kneader when the appliance is running.
• Do not allow long hair, scarves, ties etc. to dangle over the appliance during operation.
• Never insert utensils (spoon, spatula, etc.) through the feed tube in the lids (b2), (d2) or (h2) in the drum body (g1).
• Do not run the blender jug (d1) without its lid (d2).
• Use only one accessory at a time.
• Do not use the bowls (b1, d1) as containers for freezing, cooking or sterilisation.
• Do not use the juice extractor if the rotary lter (h3) is damaged.
• Switch off the appliance and unplug from the mains supply before changing accessories or handling any parts that
move during use.
• Before using for the rst time, wash all accessory parts in warm water and washing up liquid (except for the
attachment (e): see cleaning paragraph) Rinse and dry.
• Place the appliance on a at, clean and dry surface. Make sure that the selector button (a1) is in “0” position and
plug in your appliance.
• You have several options for starting your appliance:
- Intermittent operation (pulse): Turn the selector button (a1) to the “pulse” position. Using a succession of
pulses can give you better control when preparing certain foods.
- Continuous operation: Turn the selector button (a1) to the desired position from “1” to “max” depending on the
food you are preparing.
You can change it as required during preparation.
• To stop the appliance, turn the button (a1) to “0”.
Important: The appliance will start only if the cover (a5) and the head (a3) are locked. The appliance will stop
immediately if you unlock the cover (a5) and/or the head (a3) during operation. Lock the cover and/or the
head, turn the control button (a1) to the “0” position, and then start the appliance normally by selecting the
desired speed.
Your appliance comes with a microprocessor that controls and analyses the operating power. If the load becomes
too high, your appliance will stop automatically. To restart your appliance, turn the rotary button (a1) to the “0”
position and remove some of your ingredients. Allow your appliance to cool down for a few minutes. You can then
select the desired speed to complete your preparation.
1 - MIXING / KNEADING / BEATING / EMULSIFYING / WHISKING
You can prepare up to 1,8 kg of dough using the stainless steel bowl (b1) and its lid (b2) depending on the food.
ACCESSORIES USED:
- Stainless steel bowl (b1).
- Lid (b2)
- Kneader (c1) or mixer (c2) or balloon whisk (c3)
1.1 - ASSEMBLING THE ACCESSORIES
• Press the button (a2) to release the multi-function head (a3) and raise it until it locks in place. (Fig 1.1a).
• Lock the stainless steel bowl (b1) (clockwise) on the appliance and put in the ingredients. (Fig 1.1b)
• Insert the desired accessory (c1, c2 or c3) on the outlet (a6), push and rotate it anti-clockwise a quarter turn to
lock the accessory in its housing. (Fig 1.1c).
• Place the multi-function head (a3) to the horizontal position: press the button (a2) and manually lower the multi-
function head (a3) until it locks (the button (a2) returns to its initial position).
• Slide the lid (b2) over the stainless steel bowl (b1). (Fig 1.1d).
Note: It is not essential to use the lid but it prevents splashing.
• Make sure that the cover (a5) is locked correctly (clockwise) on the high-speed outlet (a4).
1.2 - USAGE
Start by turning the selector button (a1) to the desired position according to the recipe.
• The appliance starts running immediately.
You can add food through the hole in the lid (b2) during preparation.
• To stop the appliance, turn the button (a1) to “0”.
TE_KITCHEN-8080012365-01.indd 9 5/2/13 8:25 PM
Loading ...
Loading ...
Loading ...