Loading ...
Loading ...
Loading ...
Operating the appliance en
31
Programme end
The programme has finished when the
value ‹:‹‹ appears in the display
window h. If a value has been set for
the signal volume, then the end of the
programme is also indicated by a
buzzer.
Here’s how to change the signal
volume:
1. Switch on ON/OFF switch (.
2. Hold down the programme button
# and then repeatedly press the
START button ` until •:‹...
appears in the display window.
3. Release both buttons.
The LED of the # button flashes
and the digital display h shows
the factory setting •:‹….
4. Press the programme button #
repeatedly until the factory setting
value ›:‹ƒ appears in the display
window h.
5. Press the programme button 3.
Each time the button is pressed the
set value increases by one level;
when it reaches the value ›:‹„ the
display jumps back to ›:‹‹ (off).
6. Press START button `.
The set value is saved.
* The end of the programme is
displayed n the floor (only for the
settings Timelight †:‹‚ and †:‹ƒ).
* depending on the features of your
dishwasher
Auto Power Off
(Automatic switch-off after
end of programme)
or interior lighting *
Au t o Po we r Off
To save power you can set the
dishwasher to switch off automatically
1 minute or 120 minutes after the end
of the programme.You can choose a
setting from ˜:‹‹ to ˜:‹ƒ.
Note: Note that with the settings ˜:‹‚
and ˜:‹ƒ, the interior light 1" is
switched off. To activate the interior
lighting, press the ON/OFF switch (.
If the door is open for longer than
60 minutes, the light will switch off
automatically.
Here is how to change the setting:
1. Switch on the ON/OFF switch (.
2. Hold down the programme button
# and then repeatedly press the
START button ` until •:‹...
appears in the display window.
3. Release both buttons.
The LED of the # button flashes
and the digital display h lights up
to show the value •:‹....
4. Press the programme button #
repeatedly until the value ˜:‹...
appears in the display window h.
5. Press programme button 3.
Each time the button is pressed, the
set value increases by one level;
when it reaches the value ˜:‹,ƒ the
display jumps back to ˜:‹‹.
6. Press START button `.
The set value is saved.
* depending on the features of your
dishwasher
˜:‹‹ Appliance does not switch off
automatically.
The interior light 1" comes on
when the door is opened
irrespective of whether the
ON/OFF switch ( is switched
on or off.When the door is closed,
the light is off. If the door remains
open for longer than 60 minutes,
the light will switch off
automatically. The interior light
1" switches on only if the setting
˜:‹‹ has been selected.
˜:‹‚ Appliance switches off after
1 minute.
˜:‹ƒ The appliance switches off after
120 minutes.
Loading ...
Loading ...
Loading ...