LV-7285 User Manual

Loading ...

3. Projecting an Image (Basic Operation)

Adjustable Tilt Foot

Adjustable Tilt

Foot Lever

Adjusting the Tilt Foot

1. Lift the front edge of the projector.

CAUTION:

Do not try to touch the ventilation outlet during Tilt Foot adjustment

as it can become heated while the projector is turned on and during

its cool down period after it is turned off.

2. Push straight up and hold the Adjustable Tilt Foot Lever on the

front of the projector to extend the adjustable tilt foot.

3. Lower the front of the projector to the desired height.

4. Release the Adjustable Tilt Foot Lever to lock the Adjustable tilt

foot.

The tilt foot can be extended up to 1.8 inch/45 mm.

There is approximately 10 degrees (up) of adjustment for the front

of the projector.

Rotate the rear foot to the desired height in order to square the im-

age on the projection surface.

CAUTION:

• Donotusethetilt-footforpurposesotherthanoriginallyintended.

Misuses such as using the tilt foot to carry or hang (from the wall

or ceiling) the projector can cause damage to the projector.

Adjusting the left and right tilt of an image [Rear foot]

1. Remove the spacer (black rubber) from the rear foot.

A spacer is provided for leveling the projector. Keep the spacer for

future use.

2. Rotate the rear foot.

The rear foot can be extended up to 0.4 inch/10 mm. Rotating the

rear foot allows the projector to be placed horizontally.

NOTE:

• Donotextendtherearfootbeyonditsheightlimit(0.4inch/10mm).Doing

so may cause the rear foot to come out of the projector.

• Afterusingtheprojector,attachthespacertotherearfoot.

Spacer

(black rubber)

Rear foot

Down

Loading ...

User Manual - Page 39