Loading ...
Loading ...
Loading ...
Bake/Temp Recall Pad
Touch this pad to select the bake function.
Bake Light
Flashes while in edit mode—you can change the oven
temperature at this point. Glows when the oven is in
bake mode.
Start/On Pad
Must be touched to start any cooking or cleaning
function.
Display
Shows the time of day, oven temperature
and the times set for the timer or automatic
oven operations. The display will show PrE while
preheating. When the oven reaches the selected
temperature, the oven control will beep and the
display will show the oven temperature.
If “F–” and a number or letter flash in the display
and the oven control signals, this indicates a function
error code.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when there
has been a power outage. Reset the clock.
If the function error code appears during the self-
cleaning cycle, check the oven door latch. The latch
handle may have been moved, even if only slightly,
from the latched position. Make sure the latch is
moved to the right as far as it will go.
Touch the Clear/Off pad. Allow the oven to cool
for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power
to the range and call for service.
Display On/Off
To save energy, you can turn off the time of day
clock and the display when the range is not in use.
Touch and hold the + and – pads at the same time
to enable or disable this feature. This will turn the
display on or off. NOTE: The display will remain off
after a power outage.
Kitchen Timer On/Off
or Timer On/Off Pad
Touch this pad to select the timer feature.
Then press + and – pads to adjust time.
Timer Light
Flashes while in edit mode—you can change the set
time at this point. Glows when the timer has been
activated. Flashes again when the time has run out
until the control is reset.
Clock Pad
To set the clock, press this pad
twice and then press the + and –
pads. The time of day will flash in
the display when the oven is first
turned on.
Start Time Pad
Use along with the Cooking Time
or Self Clean pads to set the oven
to start and stop automatically
at a time you set.
Start Time Light
Flashes while in edit mode—you can change the start
time at this point. Glows when the function has been
activated.
Cooking Time Pad
Touch this pad and then touch the
+ or – pads to set the amount of
time you want your food to cook.
The oven will shut off when the
cooking time has run out.
Cooking Time Light
Flashes while in edit mode—you can change the set
time at this point. Glows when the function has been
activated. Flashes again when the time has run out
until the control is reset.
Automatic Oven Light
This lights anytime
the oven has been
programmed using the
Cooking Time or Start
Time functions.
Oven Light On/Off Pad
Touch this pad to turn the oven light
on or off.
– Pad
Short taps to this pad will decrease
the time or temperature by small
amounts. Touch and hold the
pad to decrease the time or
temperature by larger amounts.
+ Pad
Short taps to this pad will increase
the time or temperature by small
amounts. Touch and hold the pad
to increase the time or temperature
by larger amounts.
Throughout this manual, features and appearance may vary from your model.
Safety Instructions
Operating
Instructions
Care and Cleaning Troubleshooting Tips Consumer Support
11
Using the oven control, clock
and timer features and settings.
GEAppliances.com
Cooking
Time
Bake
Temp Recall
Clock
Kitchen
Timer
On/Off
Start
Time
On/Off
Oven
Light
Loading ...
Loading ...
Loading ...