Loading ...
Loading ...
Loading ...
4.Add Rinse Aid
■ Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid, your dishes and dishwasher interior
will have excessive moisture. The heating and drying options will
not perform as well without rinse aid.
■ Rinse aid keeps water from forming droplets that can dry as spots
or streaks. It also improves drying by allowing water to drain off of
dishes after final rinse.
■ To add rinse aid, open the dispenser lid by gently pushing in the
center of the lid with your thumb while lifting up on the edge.
■ Pour rinse aid into the opening until the indicator level shows that it
is full.
■ Close dispenser by pushing down gently on the lid.
NOTE: For most water conditions, the factory setting
will give good results.
If you are experiencing poor drying performance,
you may want to try a higher setting. Turn the arrow
adjuster to a higher setting to increase the amount
of rinse aid dispensed.
5. Select a Cycle
Efficient dishwashers run longer to save water and energy, just as
driving a car slower saves on gas. Estimated cycle times will be
displayed. Cycle times may increase or decrease depending on cycle
and option selections.
6.Select Options
You can customize your cycles by pressing the options desired. If you
change your mind, press the option again to turn off the option. Not all
options are available for every cycle. If an invalid option is selected for a
given cycle, lights will flash.
7.Start or Resume a Cycle
NOTE: When starting a new cycle, run hot water at sink nearest your
dishwasher until water is hot. Turn off water.
■ If Start/Resume button is located on top of door, push door firmly
closed within 4 seconds of pressing START/RESUME. If door is not
closed within 4 seconds, the Start button LED will flash, an audible
tone will be heard (on top control models), and cycle will not start.
IMPORTANT: If anyone opens the door (such as, adding a dish, even
during the Delay Hours option), Start/Resume button must be pressed
each time.
This information covers several different models. Your dishwasher may not have all cycles and options described.
*Cycle times may increase depending on water temperature, heavy soil condition, dish load size and options selected. Adding options will add
time to the cycle. See the options information.
Pre Wash
OPEN
SLIDE
SLIDE
CYCLES ESTIMATED
WASH
TIME*
DISPLAYED
WATER
USAGE
GALLONS
(LITERS)
Targets toughest food soils. Use for hard-to-clean heavily soiled pots, pans, casseroles, and tableware. 3:28 9.0 (34.0)
Load and soil sensing cycle. This cycle is optimized to achieve best cleaning with minimal water and
energy for all soil levels.
2:03 4.5 (16.9)
This cycle with only the Heated Dry option selected, and without other options selected, is
recommended to completely wash and dry a full load of normally soiled dishes. The energy usage
label is based on this cycle and option combination.
1:51 3.8 (14.5)
For fast results, this cycle will clean your light to medium soiled dishes, but use slightly more water and
energy. For improved drying, select heated dry option.
:59 5.5 (20.9)
Use for rinsing dishes, glasses, and silverware that will not be washed right away.
Do not use detergent. During cycle, the rinse action will repeatedly pause for several seconds.
:11 1.3 (4.9)
CYCLE GUIDE
™
Loading ...
Loading ...
Loading ...