Loading ...
Loading ...
Loading ...
Changing Color Panels
Installing Reversible Door and Access Panels
Some models are equipped with reversible door and access panel inserts that offer three decorative colors.
Electrical Shock Hazard
To prevent electrical shock,
disconnect electrical power supply
to dishwasher before changing
panel.
Cut Hazard
Metal door panels are sharp m
and should be handled with
care. Wear gloves to protect Lu_
hands,
Failure to do so can result in : ,,-,,
injury.
To change exposed color panel:
1. Remove trim strip from one side of the door panel. Loosen but do not remove screws from trim strip on
remaining side.
2. Remove trim strip from one side of access panel, Loosen but do not remove screws from trim strip on
remaining side.
3. Slide insert panels out of frame. Position color panel of choice to outside and replace panel in frame.
4. Be sure edges of insert panels are under trim strips on opposite side. Press strips tightly against panels
before securing screws. Replace trim strips.
Trim Strips
Loosen
all
screws
"'_ allL°°sen
screws
Insert Door Panel
\
!_ Loosen
_ all
screws
Access
Panel
Installing a Wood Panel Trim Kit
A panel of up to 3/16 "thickness may be used in
place of the aluminum insert panels furnished with
your dishwasher. You will need a wood decorator
trim kit which is available at Sears Service Center-
Part No. 5303293778.
Door and Access Panel
Dimensions
Door Panel:
Access Panel:
17 7/16" X 17 5/16"
17 7/16" X 6 1/2"
Note: Door springs will need to be adjusted to
balance weight of panels. See the Installation
instructions.
13
Loading ...
Loading ...
Loading ...