Loading ...
Loading ...
Loading ...
9 10
www.ninjakitchen.com1-877-646-5288
Assembly and Use for the Food Processor Bowl
ASSEMBLY
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the Bowl onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the
“LOCK” symbol on the motor base.
4 Rotate the bowl clockwise to lock into place. You will
hear a click when the lock is engaged. (Fig. 2)
5 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6 Holding the desired Blade Assembly by the top of the
shaft, place it onto the drive gear inside the bowl.
Ensure that the Blade Assembly is seated properly and
is standing upright. (Fig. 4)
NOTE: The Blade Assembly will fit loosely on the drive
gear.
7 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
8 Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl’s handle. (Fig. 5) Press the handle down until you
hear a click.
NOTE: The 64 oz. bowl is not intended for
blending drinks. Do not overfill.
NOTE: To add liquids during processing,
open the drizzle hole on the top of the
lid and pour the liquid slowly into the
mixture.
9 Plug the power cord into the electrical
outlet and press the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work
if the bowl and lid are not installed correctly.
When the bowl and lid are installed properly, the
power button ( ) will be solid, indicating that the
appliance is ready for use.
Fig. 4 Fig. 5Fig. 1
Fig. 3a
Fig. 3bFig. 2
USING THE CHOPPING BLADE ASSEMBLY
1 Review warning and caution statements at the top of
page 9 before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Secure the bowl onto the motor base.
4 Holding the Chopping Blade Assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)
5 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
6 Plug the power cord into the electrical outlet and press
on the power button ( ). (Fig. 2) Select the speed
that best suits your needs. Pulse ingredients for even
chopping by pressing down in short intervals.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Chopping Blade Assembly to stop turning.
8 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USING THE DOUGH BLADE ASSEMBLY
IMPORTANT: Use only the “DOUGH” button when
using this attachment.
1 Review warning and caution statements at the top of
page 9 before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)
5 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 5)
NOTE: For best results add wet ingredients first and
then add dry ingredients.
6 Plug the power cord into the electrical outlet and press
on the power button ( ). (Fig. 2)
7 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
8 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
9 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)
REMOVAL
Fig. 5
USE
CHOPPING BLADE
ASSEMBLY
Fig. 1 Fig. 2 Fig. 3 Fig. 4
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully
remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do so will result in a risk of
laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential
to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
OR
USE
DOUGH BLADE
ASSEMBLY
Loading ...
Loading ...
Loading ...