User Manual Leviton LTB30-1LZ Decora Electronic Countdown T

Single Pole (One location) or 3-Way (Multi-location)

Electronic Countdown Timer Switch

Cat. No. LTB15, LTB30, LTB60, LTB02, LTB12 Lighted

20A Resistive/Inductive, 1800W Incandescent, 1HP

120VAC, 60Hz

INSTALLATION INSTRUCTIONS

WARNINGS AND CAUTIONS:

• Tobeinstalledand/orusedinaccordancewithappropriateelectricalcodesandregulations.

• Ifyouareunsureaboutanypartoftheseinstructions,consultanelectrician.

• Levitonelectroniccountdowntimerswitchesarenotcompatiblewithstandard3-wayor4-wayswitches.Theymustbeusedwithcompatible

Vizia

ON/OFFremoteswitches.

• Recommendedminimumwallboxdepthis2-1/2”.

WARNINGS AND CAUTIONS:

• Disconnect power at circuit breaker or fuse when servicing, installing or removing ﬁxture.

• Useonlyone(1)Levitonelectroniccountdowntimerswitchinamulti-locationcircuitwithupto9coordinatingremoteswitches

withoutLEDsorupto4matchingremoteswitcheswithLEDs

• Maximumwirelengthfromtimerswitchtoallinstalledremoteswitchescannotexceed300ft(90m).

• Usethisdeviceonlywithcopper or copper clad wire only.

IMPORTANT:For3-Wayapplications,notethatoneofthescrewterminals

fromtheoldswitchbeingremovedwillusuallybeadifferentcolor(Black)

orlabeledCommon.Tagthatwirewithelectricaltapeandidentifyasthe

common(LineorLoad)inboththeswitchwallboxandremotewallbox.

TOOLS NEEDED TO INSTALL YOUR TIMER SWITCH

Slotted/PhillipsScrewdriver ElectricalTape Pliers

Pencil Cutters Ruler

WIRING TIMER SWITCH:

Connect wires per WIRING DIAGRAM as follows:

• GreenorbarecopperwireinwallboxtoGreenlead.

• LineHotwallboxwiretoBlacklead.

• LoadwallboxwiretoRedlead.

• LineNeutralwallboxwiretoWhitelead.

• TimerSwitchYellow/RedleadshouldhaveRedinsulationlabelafxed.

• Proceed to Step 5.

Hot (Black)

Neutral (White)

Coordinating Remote Switch (no LED)

YL/RD

Bla c k

BK WH

White

Line

120VAC, 60Hz

Green

Ground

Green

Ground

(u n used )

Load

Timer Switch

WIRING TIMER SWITCH:

Connect wires per WIRING DIAGRAM as follows:

NOTE:ThetimerswitchmustbeinstalledinawallboxthathasaLine

Hot connection.

NOTE:Maximumwirelengthfromtimerswitchtoallinstalledremote

switchescannotexceed300ft(90m).

• GreenorbarecopperwireinwallboxtoGreenlead.

• LineHot(common)wallboxwireidentied(tagged)whenremoving

oldswitchtoBlacklead.

• FirstTravelerwallboxwiretoRedlead(note wire color).

• RemoveRedinsulatinglabelfromYellow/Redlead.

• SecondTravelerwallboxwiretoYellow/Redlead(note wire color).

Thistravelerfromthetimerswitchmustgototheterminalscrewon

theremoteswitchmarked"YL/RD".

• LineNeutralwallboxwiretoWhitelead.

WIRING VIZIA COORDINATING REMOTE SWITCH:

Connect wires per WIRING DIAGRAM as follows:

NOTE:"BK"and"RD"terminalsoncoordinatingremoteswitchare

unused.Tightenbothscrews.

NOTE:Maximumwirelengthfromtimerswitchtolastremoteswitch

is300ft(90m).

• GreenorbarecopperwireinwallboxtoGreenterminalscrew.

• Loadwallboxwireidentied(tagged)whenremovingoldswitchto

First Traveler (note color as above).

• SecondTravelerwallboxwire(note color as above)toterminal

screwmarked"YL/RD".Thistravelerfromtheremoteswitchmustgo

totheYellow/Redleadofthetimerswitch.

• RemoveWhiteinsulatinglabelfromterminalscrewmarked"WH".

• LineNeutralwallboxwiretoterminalscrewmarked"WH".

• ProceedtoStep5.

ONOFF

ONOFFONOFF

ONOFF

WARNING: TO AVOID FIRE SHOCK OR DEATH; TURN

OFF POWER atcircuitbreakerorfuseandtestthatpoweris

offbeforewiring!

Step 1

Single Pole

1. Line (Hot)

2. Neutral

3.Ground

4. Load

3-Way

1. Line or Load

(see

IMPORTANT

instruction)

2. Neutral

3.Ground

4. First Traveler – note color

5. Second Traveler – note

color.

Identifying your wiring application (most common):

NOTE:Ifthewiringinyourwallboxdoesnotresembleanyof

thesecongurations,consultanelectrician.

Step 2

Insulating label:

This wire is used in 3-way installations only.

For single pole installations, do not remove

this insulating label.

Black

White

Red

Yellow/Red

Green

Single Pole Wiring Application:

Step 4a

Step 4a cont'd

YL/RD

Coordinating Remote Switch Timer Switch

Black

White

Red

Yellow/Red

Green

3-Way Wiring with Vizia

Coordinating Remote

Switch (no LED) Application:

Step 4b

• Makesurethattheendsofthewiresfromthewallboxare

straight (cut if necessary).

• Removeinsulationfromeachwireinthewallboxasshown.

• ForSingle-PoleApplication,gotoStep4a.

• For3-WayCoordinatingRemoteSwitch(noLEDs)Application,gotoStep4b.

• For3-WayMatchingRemoteSwitch(withLEDs)Application,gotoStep4c.

Step 3

Preparing and connecting wires:

Pulloffpre-cutinsulationfromtimerswitchleads.Makesure

thattheendsofthewiresfromthewallboxarestraight(cutif

necessary).Removeinsulationfromeachwireinthewallbox

asshown:

5/8"

(1.6 cm)

Strip Gage

(measure bare

wire here)

Cut

(if necessary)

Step 4b cont'd

Changing the color of your device:

Yourdevicemayincludecoloroptions.Tochangecoloroftheface,

proceedasfollows:

Push in side

at tab to release

Line up tabs and

press in sides one

at a time to attach

For non-standard wiring applications, refer to

Wire Nut and Connector Size Chart

WIRE CONNECTOR / # OF COND. COMBINATION CHART

1 - #12 w/ 1 to 3 #14, #16 or #18

2 - #12 w/ 1 to 2 #16 or #18

1 - #14 w/ 1 to 4 #16 or #18

2 - #14 w/ 1 to 3 #16 or #18

Timer Switch

Insulating

Label

Black

Hot (Black)Black

Line

120 VAC, 60Hz

Neutral (White)

Red Yellow/Red

White

Green

Ground

Load

PK-93796-10-00-2A

NOTE:UsecheckboxeswhenStepsarecompleted.

INSTALLING YOUR TIMER SWITCH

MAXIMUM LOAD PER TIMER FOR MULTI-DEVICE INSTALLATIONS

Load Single TwoDevices More than 2 devices

Resistive Load 20A(2400W) 16A(1920W) 16A(1920W)

Incandescent Load

1800W 1800W 1800W

Inductive Load 20A 16A 16A

Motor Load 1HP 1HP 1HP

NOTE:Formatchingremotew/LEDsinstallation,

the First TravelerbecomesLineHot.

Loading ...

User Manual Leviton LTB30-1LZ Decora Electronic Countdown Timer Switch

Documents for Leviton LTB30-1LZ

Installation Instruction

Specifications

Photos