User Manual Frigidaire LGHT1837LP Gallery 18.28 cu. ft. Top Freezer Refrigerator

You may need to adjust your shelves or door bins for
spacing needs or simple care and cleaning.

Before adjusting the shelves and/or door bins, remove
all the food items.

Remove the shelf by pulling forward to the stop position
using 2 hands to avoid dropping.

Lift the front edge up and pull it out to replace the shelf.

Next, rest the side edges on any pair of shelf rails and
carefully push shelf back into position. Some Top-
Freezer refrigerator models have door bins (or racks) to
accommodate taller or larger items.Before removing
door bins (or racks) remove all the food items.

Push on the bin (or rack) sides to release from the
locking tabs. Then, pull straight out to install the door
bin (or rack) simply push straight ahead. You may hear
the sides lock into the tabs.When cleaning shelves
and/or door bins, allow any glass components to warm
to room temperature before immersing in warm water to
prevent damage. Simply use warm, soapy water or glass
cleaner.

If your refrigerator was just installed, it takes about 24
hours for the temperature to stabilize.

It is preferred that you do not adjust the temperature
from the recommended setting during the 1st 24 hours.

For refrigerators with electronic controls (most Side-by-
Side and French-Door refrigerators) – Fresh food
compartment should be set for 37 degrees Fahrenheit
and the freezer should be set for 0 degrees Fahrenheit.

If you have a Multi-Door refrigerator with a Custom-
Flex® Temp Drawer, it is recommended to set the fresh
food compartment at 39 degrees Fahrenheit. For
refrigerators with dial controls – An indicator mark for
“normal” will be visible.