Loading ...
Loading ...
Loading ...
If the model you have purchased has the controls shown in Figure 11 and in Figure 12, replace the charcoal filters
when the Filter Alarm appears (see “Controls” paragraph).
Grease filters : to remove the grease filters, push the retainer near the handle inwards and pull the filter downwards
(Fig. 4); Open the holder and remove the other filter in the same way. Wash the filters with neutral detergent.
If the model you have purchased has the controls shown in Figure 9, clean the grease filters on average every 2 months
depending on use. If the model you have purchased has the controls shown in Figures 10, 11 and 12, clean the grease
filters when the Filter Alarm appears (see “Controls” paragraph).
Lightings:
- If the neon light or bulbs need changing, slacken the light cover by disconnecting the screw and remove it
(Fig. 14).
For the neon light: Replace with a neon light of the same type.
For the bulbs: Use Only CANDLE HALOGEN LAMP - Ø 35mm, E14–220-240 Vac, 28W or INCANDESCENT
LAMP-E14–220-240 Vac, 40W
- If the halogen lamps need changing, slacken the ring nut in an anticlockwise direction and remove the bulb itself (Fig.15).
Replace with a bulb of the same type. CAUTION: Do not handle glass bulb with bare hands. In case the new halogen
bulb does not light up once it is on, disconnect the apparatus for a few seconds.
Loading ...
Loading ...
Loading ...