Loading ...
Loading ...
Loading ...
28
Description Display
Code
Customer action (Summary)
Make sure both wall taps are on and hose filters are not
blocked. Raise drain hose if water is flowing out of drain
hose. Press “Start/Pause” to re-start wash.
If problem remains, call Service.
If the water is pouring onto the floor, turn OFF both wall
taps. Wait a few minutes to see if the fault is corrected.
If not, call Service.
Not filling with
water
Draining problem
Loss of water,
while washing
Flood
Wait, this fault may clear itself. If not, rotate the
PROGRAM KNOB to “Drain + Spin” program, then press
“Start/Pause” button to drain the wash bowl.
If this problem is repeated, call Service.
Water level
problem
If problem remains, call Service.
Wait a few minutes to see if the fault is corrected.
If not, set the washing machine to PAUSE by press
“Start/Pause” button then check the drain hose for
blockage. Press “Start/Pause” to continue the wash.
If water level in wash bowl is low and water is flooding the
floor, rotate the PROGRAM KNOB to “Drain + Spin”
program, then press “Start/Pause” button.
Should this make things worse, turn off the machine and
call Service.
Otherwise, press “Start/Pause” to continue the wash.
TROUBLESHOOTING FAULT DISPLAYS
If you have a problem with your washing machine and before you call service, make
sure you have followed ALL of the instructions that may remedy the problem. You
will find instructions in the ‘Troubleshooting’ section and in the table below.
When the washing machine detects a problem that requires your attention, you will
be alerted. The machine will warn you of this problem by displaying a fault code in
the digital display, accompanied by “Beeping”.
Fault information and the action you should take are described in the following table.
Fault information and a guide for when you should call for service.
E30
E20
E30
Loading ...
Loading ...
Loading ...