User Manual - Page 3

For MEDB800VQ. Also, The document are for others Maytag models: MEDB200VQ, MEDB400VQ, MEDB700VQ, MEDB800VB, MEDB800VE, MEDB800VQ, MEDB800VU, MEDB800YW, MEDB850WB, MEDB850WL, MEDB850WQ, MEDB850WR, MEDB850XG, MEDB850XQ, MEDB850XR, MGDB200VQ, MGDB400VQ, MGDB700VQ, MGDB800VB, MGDB800VE, MGDB800VQ, MGDB800VU, MGDB800YW, MGDB850WB, MGDB850WL, MGDB850WQ, MGDB850WR, MGDB850XG, MGDB850XQ, MGDB850XR, YMEDB400VQ, YMEDB700VQ, YMEDB800VE, YMEDB800VQ, YMEDB800VU, YMEDB800YW, YMEDB850WB, YMEDB850WL, YMEDB850WQ, YMEDB850WR, YMEDB850XG, YMEDB850XQ, YMEDB850XR

Loading ...
Loading ...
WARNING: For your safety, the information in this manual must be followed to minimize
the risk of re or explosion, or to prevent property damage, personal injury, or death.
Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this
or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
If you cannot reach your gas supplier, call the re department.
Installation and service must be performed by a qualied installer, service agency, or
the gas supplier.
Clear the room, building, or area of all occupants.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the “What to do if you smell gas” instructions.
IMPORTANT: The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54.
The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National
Electrical Code, ANSI/NFPA 70.
3
Loading ...
Loading ...
Loading ...