Loading ...
Loading ...
Loading ...
6 electrolux.com.au
Clearances
When installed the
refrigerator needs to have
adequate air ventilation. It is
important to ensure there
is good airflow from the
front to underneath and up
the rear to the top of the
cabinet (see diagrams).
Airflow
Front airflow cut-out
NOTE: A decorative grill can be fitted so long as it does
not obstruct airflow and is removable for cleaning.
Front airflow cut-out
50mm
Dim E
Bottom rear airflow cut-out
130mm
Bottom rear airflow cut-out
Dim E
Top rear airflow cut-out
Dim E
80mm
When positioned in a corner the clearance of Dim G on
the hinge side of the cabinet will allow the doors to be
opened enough to enable the removal of the crisper bins.
120º
Dim C
Dim G
NOTE: Use the 120° hinges supplied with the kit to attach
the cupboard door to the cupboard.
Attach the hinge to the door to ensure that door can have
maximum opening, i.e. the door edge should not hit the
cabinet when the door is fully open.
Cabinet construction
(top mount cupboard shown below)
5mm gap
between doors
Dim I
Dim D
NOTE: If Dim D is larger than 1000mm in height, 3 hins are
required to attach the cupboard door to the cupboard.
If Dim D is smaller than 1000mm in height, 2 hinges are
required/sufficient.
DIMENSIONS (CONTINUED)
Loading ...
Loading ...
Loading ...