Loading ...
Loading ...
Loading ...
8
Before First Use
Remove all stickers and protective covers
from the garment steamer and unwind
the power cord.
When operating the garment steamer
for the first time, allow it to heat up for
3-5 minutes and then hold down the
steam trigger for 30 seconds. This will
remove any impurities and odours that
might remain on the product from the
manufacturing process or left over
moisture from previous use.
When using the garment steamer for the
first time, test on an old piece of fabric
to ensure that the water tank and steam
plate are completely clean.
During first use, vapour may emit.
This is due to the initial heating of the
materials. The vapour will not harm the
performance of the iron and is safe.
NOTE: When unpacking the
garment steamer, ensure that
you have received all items listed
in the parts list before discarding
the packaging.
Filling the Water Tank
The Kambrook SwiftSteam Garment
Steamer should never be operated
without water in the water tank and the
water tank fitted correctly to the steamer
body. When filled to the ‘MAX’ level, the
water tank holds 250ml of water.
The garment steamer is designed to be
used with tap water. The hardness of tap
water can vary in different regions; water
testing kits can be purchased online or
at water filtration specialists to determine
the hardness of your tap water.
If your tap water is particularly hard,
it is recommended that distilled or
demineralised water be used with this
Using Your Kambrook Garment Steamer
garment steamer. Not doing so can
result in a build-up of impurities in the
steamer resulting in a loss of steaming
performance.
The water tank on Kambrook SwiftSteam
Garment Steamer is fully detachable. To
remove the water tank, press and hold
the water tank release buttons on either
side of the water tank. Holding the water
tank with one hand and the garment
steamer body with the other, gently pull
the water tank away from the body
(See Fig. 1).
Fig. 1
To fill the water tank, open the water
tank inlet cover and pour water in the
opening until the water level reaches the
indicated ‘MAX’ level (See Fig.2). When
full, close the water tank inlet cover
securely and replace the water tank onto
the garment steamer body. Ensure that
the water tank clicks into place before
operating the garment steamer.
Fig. 2
Loading ...
Loading ...
Loading ...