Home
Bookmarks
Home
Neff
Neff D60LAA0N0/02 User Manual
Page 8
Neff D60LAA0N0/02 N 30 Built-under cooker hood
User Manual - Page 8
For D60LAA0N0/02.
PDF File Manual
,
8 pages
,
Read Online
|
Download pdf file
DUL62FA60, DUL62FA20, DUL62FA50, D60LAA0N0, LU62LFA60, LU62LFA50, LU62LFA20
: Important safety information
Danger of death!
Risk of death!
Danger of suffocation!
Risk of electric shock!
Risk of electric shock!
Risk of fire!
Risk of fire!
Risk of injury!
Risk of injury!
Risk of injury!
Risk of injury!
General information
Exhaust duct
Note
Electrical connection
: Risk of electric shock!
Installation preparation
Caution!
Checking the wall
Appliance dimensions and safety clearances
Preparing the appliance
Installing the appliance on a wall unit
1. Use the drill jig or the hole pattern to mark out where the holes are to be drilled. (Fig. 1)
2. If necessary, cut out the opening for the exhaust air pipe in the correct position in the upper cabinet for air extraction mode.
3. For circulating-air mode, fit the two blind plugs to the rear and upper exhaust air openings. (Fig. 2)
4. Position the extractor hood below the base plate of the upper cabinet.
5. Use four screws to secure the appliance to the base plate of the upper cabinet from above.
Installing the appliance on a wall
Caution!
1. Use the drill jig or the hole pattern to drill the holes. (Fig. 1)
2. Press in the wall plugs flush with the wall.
3. Screw on the angle bracket.
4. If necessary, cut out the opening for the exhaust air pipe in the correct position in the wall-hanging cupboard for air extraction mode.
5. For circulating-air mode, fit the two blind plugs to the rear and upper exhaust air openings. (Fig. 2)
6. Fit the appliance.
7. Remove the filter grid; see the instruction manual.
8. Align the appliance horizontally using the two screws. (Fig. 3)
9. Screw the safety bracket securely to the wall over the appliance. This will ensure that the appliance cannot slip out of the bracket and fall if it is unintentionally hit from below. (Fig. 4)
Connecting the appliance to the power supply
Establishing the connection for the air extraction
Notes
1. If necessary, swap the exhaust connection and blind plug.
2. Attach the exhaust air pipe directly to the exhaust connection.
3. Connect it to the air extraction opening.
4. Seal the joints appropriately.
Establishing the connection for the circulated air
1. Remove the filter grid; see the instruction manual.
2. Use the lever on the extractor hood to select the circulating-air operating mode (Fig. 5).
Removing the appliance
1. Disconnect the appliance from the power supply.
2. Loosen the exhaust-air lines.
3. If necessary, loosen the screw connections with the unit.
4. Remove the appliance.
Page 8/8
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Contents
Table of Contents
Search
Previous
Next
Bookmarks
Loading ...
Loading ...
Loading ...
File type: PDF
File name: 86941771_d60laa0n0-02.pdf
File size: 471.56 KB
File Language: English
Pages: 8
Author: Neff
Published: 2020-06-29
Updated: 2023-07-27
Download File
Table of Contents
×
DUL62FA60, DUL62FA20, DUL62FA50, D60LAA0N0, LU62LFA60, LU62LFA50, LU62LFA20
1
: Important safety information
3
Danger of death!
3
Risk of death!
3
Danger of suffocation!
3
Risk of electric shock!
4
Risk of electric shock!
4
Risk of fire!
4
Risk of fire!
4
Risk of injury!
4
Risk of injury!
4
Risk of injury!
4
Risk of injury!
4
General information
4
Exhaust duct
4
Note
4
Electrical connection
4
: Risk of electric shock!
4
Installation preparation
4
Caution!
4
Checking the wall
4
Appliance dimensions and safety clearances
4
Preparing the appliance
4
Installing the appliance on a wall unit
4
1. Use the drill jig or the hole pattern to mark out where the holes are to be drilled. (Fig. 1)
4
2. If necessary, cut out the opening for the exhaust air pipe in the correct position in the upper cabinet for air extraction mode.
4
3. For circulating-air mode, fit the two blind plugs to the rear and upper exhaust air openings. (Fig. 2)
4
4. Position the extractor hood below the base plate of the upper cabinet.
4
5. Use four screws to secure the appliance to the base plate of the upper cabinet from above.
4
Installing the appliance on a wall
4
Caution!
4
1. Use the drill jig or the hole pattern to drill the holes. (Fig. 1)
4
2. Press in the wall plugs flush with the wall.
4
3. Screw on the angle bracket.
4
4. If necessary, cut out the opening for the exhaust air pipe in the correct position in the wall-hanging cupboard for air extraction mode.
4
5. For circulating-air mode, fit the two blind plugs to the rear and upper exhaust air openings. (Fig. 2)
4
6. Fit the appliance.
4
7. Remove the filter grid; see the instruction manual.
4
8. Align the appliance horizontally using the two screws. (Fig. 3)
4
9. Screw the safety bracket securely to the wall over the appliance. This will ensure that the appliance cannot slip out of the bracket and fall if it is unintentionally hit from below. (Fig. 4)
4
Connecting the appliance to the power supply
5
Establishing the connection for the air extraction
5
Notes
5
1. If necessary, swap the exhaust connection and blind plug.
5
2. Attach the exhaust air pipe directly to the exhaust connection.
5
3. Connect it to the air extraction opening.
5
4. Seal the joints appropriately.
5
Establishing the connection for the circulated air
5
1. Remove the filter grid; see the instruction manual.
5
2. Use the lever on the extractor hood to select the circulating-air operating mode (Fig. 5).
5
Removing the appliance
5
1. Disconnect the appliance from the power supply.
5
2. Loosen the exhaust-air lines.
5
3. If necessary, loosen the screw connections with the unit.
5
4. Remove the appliance.
5
Search:
×
Search
