Loading ...
Loading ...
Loading ...
11
Chapter 8: USING THE DEVICE
1. Connect the electrodes to the TENS control unit.
2. Place electrodes on your skin.
3. Turn the Device ON by pressing the “ON/OFF” button.
4. To change to another program press the “PRG” button.
5. To change the timer, press the “TIMER” button.
6. The device will turn off automatically if the timer was set (count down minutes are shown on the
display). If it was set to C (continuous) the device has to be turned OFF manually.
7. To turn the device OFF manually, press the “ON/OFF” button for 3 seconds.
Note 1:
When the device is in use and the “PRG” button is pushed, the intensity levels will change to “0” and
the last selected program starts ashing.
Note 2:
If no button is pushed for 10 seconds while in programming mode, the device will stop ashing. To
return into programming mode follow steps above by pressing the “PRG” button.
Note 3:
If the device is in programming mode (intensity bars are at “0”), the device will automatically turn
OFF after 60 seconds if no button is pushed.
Chapter 9: ENDING YOUR TREATMENT SESSION
After the device shuts off, use the following steps as a quick reference for ending your session:
• Disconnect the lead wire(s) from the control unit.
• Remove electrodes from skin and place them back on the transparent liner. When removing
electrodes, always pull in the direction of hair growth. DO NOT REMOVE ELECTRODES WHILE
THEY ARE CONNECTED TO THE UNIT TO AVOID ANY ELECTRIC DISCHARGE. Do NOT pull
on the wires, but peel off on the corner of the electrode.
• Disconnect the lead wire(s) from the electrodes.
• Store the components in the storage bag.
Loading ...
Loading ...
Loading ...