Loading ...
Loading ...
Loading ...
5
IS THERE A PROBLEM ?
Problems Possible causes Solutions
There is no steam. The steamer is not
plugged in.
Check that your appliance is correctly
plugged in.
The water level is too low. Remove tank and rell it.
The steam button trigger
has not been primed.
Press the steam button trigger successively
for a few seconds to begin steaming.
You use the appliance for
the rst time.
When the appliance is new, press the steam
button trigger a few times.
The water tank is not in
place.
Ensure that the water tank snaps in when
put into place (full lock).
Plug in your appliance.
The appliance is not hot
enough.
Adjust temperature dial and wait for stable
temperature.
The appliance is jammed
by calc.
Apply «Maintenance descaling procedure».
The appliance does
not heat.
It is not plugged in. Allow your appliance to heat for
approximately 45 seconds before using.
Water leaks or spits. The water tank is not in
place.
Your appliance is not hot
enough.
Push and lock completely your wanter tank.
Wait for 45 seconds so that the appliance is
ready to steam.
Ensure that the temperature dial is at 3 dots
or more.
The steam leaves stains
on the fabric.
You are using water with
additives.
Never add any product additives in the
water tank.
Environment protection rst !
i Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
Loading ...
Loading ...
Loading ...