Loading ...
Loading ...
Loading ...
5
US
D:\_SONY TV\KP\SY17_KP_UC2_RG_131\4690457131_US\010COVTOC.fm masterpage: Right
XBR-75X940E / 65X930E / 55X930E
4-690-457-13(1)
US
2 Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M4 machine screws (screwed into the TV’s stand neck).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
The length of the M4 machine screw differs depending
on the rope or chain diameter. Please see below
illustration.
3 Anchor the TV to the wall by using bolts, wall anchor and
chain (or rope).
Please see below illustration for M6 eye bolt length.
Note
• Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the Stand without securing the TV and
the Stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
Rope or chain
(not supplied)
Screw hole on the stand neck
Screw (not
supplied)
M4 machine screw
(not supplied)
4 mm - 7 mm
Screw (M4)
TV’s stand neck
Rope or chain
Wall-mount holes
Rope or
chain (not
supplied)
Wall-anchor
(not supplied)
M6 eye bolts (not supplied)
8 mm - 12 mm
M6 eye bolt
TV’s rear cover
Loading ...
Loading ...
Loading ...