Whirlpool 2622242K Laundry

User Manual - Page 8

For 2622242K.

PDF File Manual, 56 pages, Read Online | Download pdf file

2622242K photo
Loading ...
Loading ...
Loading ...
8
3. Load laundry into washer
Load garments in loose heaps evenly
around basket wall. For best results, do
not pack the load tightly. Do not wrap
large items such as sheets around the
agitator; load them in loose piles around
the sides of the basket. Try mixing
dierent sized items to reduce tangling.
IMPORTANT: Do not tightly pack or force
items into washer. Items need to move
freely for best cleaning and to reduce
wrinkling and tangling.
Liquid
Chlorine Bleach
4. Add liquid chlorine bleach
to dispenser
Do not overll, dilute, or use more than 1 cup (236 mL) of bleach.
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
5. Add fabric softener to dispenser
MAX FILL
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer’s directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by lling the
dispenser with warm water until liquid reaches
the underside of the rim. See max ll line arrows.
IMPORTANT: The Rinse knob must be set to either One Rinse
with Fabric Softener or Two Rinses with Fabric Softener when
using fabric softener in the fabric softener dispenser. This
ensures that fabric softener is added at the correct time in
the rinse phase and is evenly distributed.
Adding Liquid Fabric Softener Manually to Wash Load
During the nal rinse, wait until the washer has completed
lling, then press the START/PAUSE/Unlock Lid button to pause
the washer. Lift the lid and add the measured recommended
amount of liquid fabric softener. Do not use more than the
recommended amount. Close the lid and press the START/
PAUSE/Unlock Lid button again to start the washer.
6. Select cycle
Turn cycle knob to choose your wash cycle. For more information,
see the “Cycle Guide” chart.
NOTE: Deep Fill is not available in the Normal cycle mode.
Selecting the Normal cycle with the Deep Fill setting will result
in auto sensing of the water level.
Loading ...
Loading ...
Loading ...