Loading ...
Loading ...
Loading ...
If any problem occurs, please detach the plug from the
socket and contact the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Problem Cause Solution
Light on, but motor
does not work
The outlet valve is blocked Detach flue and duct then turn
on the hood to check if the
valve opens
The capacitor has failed
Call for technical service
The control switch has
failed
Call for technical service
Light does not
work, motor does
not work
No power supply Plug another appliance into the
socket to confirm there is
power supply
Fuse has blown Check the fuse or reset the
circuit breaker
Vibration The propeller is damaged or
unbalanced
Call for technical service
The hood is not installed
correctly
Review the installation
instructions & check the
installation again for loose
screws, brackets or connections
Insufficient suction
effect
The distance between the
hood and the cooker is too
far
Check that the distance is
between 650mm to 750mm for
a gas appliance and 600mm for
electric hobs
The filters are saturated Clean the filters from grease
residue and replace after
drying.
Troubleshooting
Introduction………………………….1
Features……………………………...2
Installation………………………......2
Charcoal filter (optional)………....4
How To Use………………………….5
Safety Information………………....6
Troubleshooting………………..…..7
Electrical Diagram…………………8
Specifications……………………….8
Cleaning & Maintenance………….9
Contents
Loading ...
Loading ...
Loading ...