Loading ...
Loading ...
Loading ...
Before any maintenance or cleaning work
is carried out DISCONNECT the appliance
from the ELECTRICITY supply.
Internal Cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax
polishes or cleaning products containing
bleach or alcohol.
Regularly check the door seals and wipe clean to
ensure they are clean and free from debris.
External Cleaning
Wash the outer cabinet with warm soapy water.
Do NOT use abrasive products.
There are sharp edges on the underside
of the product so care should be taken
when cleaning.
Once or twice a year dust the condenser (black
grille) and the compressor at the back of the
appliance, with a brush or vacuum cleaner, as an
accumulation of dust will affect the performance
of the appliance and cause excessive electricity
consumption.
To Change the Light Bulb
1. Switch off the appliance and disconnect
from the electricity supply.
2. Remove the light cover by removing the
screw at the rear with a screwdriver.
3. Pull the cover outwards towards the
middle of the cabinet.
4. Unscrew the bulb and replace it with a
new 15 watt E14 SES bulb (available from
your local Service Force Centre).
5. Replace the cover by sliding it into its
original position.
6. Replace the screw.
Automatic Defrosting
Your appliance has been designed to be frost
free. This means there is no need to defrost your
appliance as this will be carried out automatically.
When the Appliance is Not in Use
When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all of
the food and clean the appliance, leaving the
door ajar to prevent unpleasant smells.
12
MAINTENANCE AND CLEANING
Loading ...
Loading ...
Loading ...