Loading ...
Loading ...
Loading ...
6 7
Never start or run the product inside a closed room or
building. Fumes from the exhaust contain dangerous carbon
monoxide.
Never attempt to make engine adjustments while the unit
is running. Always make engine adjustments with the unit
resting on a flat, clear surface with the engine turned off.
Do not use the unit if it is damaged or poorly adjusted. Never
remove the unit’s guard. Serious injury to the operator or
bystanders could result as well as damage to the machine.
Inspect the area to be cut and remove all debris that could
become entangled in the nylon cutting head. Also remove
any objects that the unit may throw during cutting.
Keep children away. Onlookers should be kept at a safe
distance from the work area, at least 15 metres away.
Never leave the unit unattended while engine is running.
Do not use this unit for any job other than those for which it
is intended as described in this manual.
Do not overreach. Keep proper footing and balance at all
times. Do not use the unit while standing on a ladder or on
any other unstable footing location.
Keep hands and feet in safe distance from the nylon cutting
line while unit is in use.
Do not use this type of unit for sweeping away debris.
Use nylon cutting head which is free of damage. If a stone or
any other obstacle is hit, stop the engine and check the nylon
cutting head. A broken or unbalanced nylon cutting head
must never be used.
Follow instructions for assembling and operation.
Do not store the unit in a closed area where fuel vapours can
reach an open flame from hot water heaters, furnaces, etc.
Store in a locked, well ventilated area only.
Ensure safe and proper performance of your unit. Please only
use original accessories. The use of any other accessories
or attachments may cause a potential hazard or injury to the
user, damage to the unit, and void this warranty.
If the unit will not be used for a long time, clean the unit
completely, especially the fuel/oil tank, its surroundings, and
the air cleaner.
When refuelling, be sure to stop the engine and confirm that
it is cooled down. Never refuel when the engine is running
or hot. When gasoline spills, be sure to wipe it up completely
and dispose of those materials before starting the engine.
Stay clear of other workers or bystanders by at least
15 metres.
Whenever approaching an operator of the unit, carefully
call their attention and confirm that the operator stops the
engine. Be careful not to startle or distract the operator
which can cause an unsafe situation.
Never touch the nylon cutting head whenever the engine is
running. If it is necessary to adjust the protector or nylon
cutting head, be sure to stop the engine and confirm that the
nylon cutting head has stopped running.
The engine should be turned off when the unit is moved
between work areas.
Be careful not to hit the nylon cutting head against stones, or
the ground. Unreasonable rough operation will shorten the
life of the unit as well as create an unsafe environment for
yourself and those around you.
Pay attention to loosening and overheating parts. If there is
any abnormality of the unit, stop operation immediately and
check the unit carefully. If necessary, have the unit serviced
by an authorised service agent. Never continue to operate a
unit which may be malfunctioning.
In start-up or during operation of the engine, never touch hot
parts such as the muffler, the high voltage wire or the spark
plug.
After the engine has stopped, the muffler is still hot. Never
place the unit in any place where there are flammable
materials (dry grass, etc.), combustible gasses or
combustible liquids.
Pay special attention to operation in the rain or just after the
rain as the ground may be slippery.
If you slip or fall to the ground, release the throttle lever
immediately.
IMPORTANT SAFETY INSTRUCTIONS
Loading ...
Loading ...
Loading ...