Loading ...
Loading ...
Loading ...
INSTALLING TOP TETHER STRAP
(Rear bench seat)
To access the anchor points
䊊
2
behind the rear
bench seat, tilt the rear seatback forward by
lifting up on the pull strap
䊊
1
behind the seat-
back.
Before securing the child restraint with the
LATCH lower anchors (rear outboard seating po-
sitions only) or the seat belt, as applicable, follow
these steps.
1. If necessary, raise or remove the head re-
straint to position the top tether strap
䊊
1
over the top of the seatback. If the head
restraint is removed, store it in a secure
place. Be sure to reinstall the head restraint
when the child restraint is removed. See
“Head restraints” in this section for
head restraint adjustment, removal
and installation information.
2. Position the top tether strap over the top of
the seatback and under the head restraint.
3. Secure the tether strap
䊊
2
to the tether
anchor point
䊊
3
on the seat directly behind
the child restraint.
4. Return the seatback to the locked position.
5. Refer to the appropriate child restraint in-
stallation procedure steps in this section
before tightening the tether strap.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
BOOSTER SEATS
Precautions on booster seats
WARNING
If a booster seat and seat belt are not used
properly, the risk of a child being injured
in a sudden stop or collision greatly
increases:
– Make sure the shoulder portion of
the belt is away from the child’s face
and neck and the lap portion of the
belt does not cross the stomach.
Anchor point access
LRS0392
Rear bench seat
WRS0423
Safety—Seats, seat belts and supplemental restraint system 1-43
Loading ...
Loading ...
Loading ...