LG Electronics 60PS60 60” Class Full HD 1080p Plasma TV User Manual

P/NO : SAC33575901(0905-REV06)

www.lgusa.com / www.lg.ca / www.lgcommercial.com

This product qualifies for ENERGY STAR in the “fac-

tory default (Home Use mode)” setting and this is

the setting in which power savings will be achieved.

Changing the factory default picture setting or enabling

other features will increase power consumption that

could exceed the limits necessary to quality for

Energy Star rating.

Please read this manual carefully before operating

your set and retain it for future reference.

The model and serial number of the TV is located

on the back and one side of the TV.

Record it below should you ever need service.

PLASMA TV

OWNER’S MANUAL

42PQ20

50PQ20

42PQ30

50PQ30

42PQ31

50PQ31

42PQ60

50PQ60

50PS30

50PS60

60PS60

42PQ30C

50PQ30C

50PS60C

60PS60C

50PS70

60PS70

50PS80

60PS80

www.lgusa.com / www.lg.ca

1-800-243-0000 USA, Consumer User

1-888-865-3026 USA, Commercial User

1-888-542-2623 CANADA

LG Customer Information Center

Model:

Serial:

WARNING / CAUTION

To prevent fire or shock hazards, do not expose

this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two condi-

tions: (1) This device may not cause (harmful)

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation (of the device).

Any changes or modifications not expressly approved

by the party responsible for compliance could void

the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way

without written authorization from LG Electronics.

Unauthorized modification could void the user’s

authority to operate this product

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the litera-

ture accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the National

Electric Code (U.S.A.). The code provides guidelines for

proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system

of the building, as close to the point of the cable entry

as practical.

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers)that produce

heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has

two blades with one wider than the other. A

grounding type plug has two blades and a

third grounding prong, The wide blade or the

third prong are provided for your safety. If the

provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

Only use attachments/accessories specified by

the manufacturer.

Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use

caution when moving the cart/apparatus com-

bination to avoid injury from tip-over.

Unplug this apparatus during lighting storms

or when unused for long periods of time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-

supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

SAFETY INSTRUCTIONS

Never touch this apparatus or antenna during

a thunder or lighting storm.

When mounting a TV on the wall, make sure

not to install the TV by the hanging power and

signal cables on the back of the TV.

Do not allow an impact shock or any objects to

fall into the product, and do not drop onto the

screen with something.

CAUTION concerning the Power Cord:

It is recommend that appliances be placed

upon a dedicated circuit; that is, a single

outlet circuit which powers only that appliance

and has no additional outlets or branch

circuits. Check the specification page of this

owner's manual to be certain.

Do not connect too many appliances to the

same AC power outlet as this could result in

fire or electric shock.

Do not overload wall outlets. Overloaded wall

outlets, loose or damaged wall outlets, extension

cords, frayed power cords, or damaged or

cracked wire insulation are dangerous. Any of

these conditions could result in electric shock

or fire. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced with

an exact replacement part by an authorized

servicer. Protect the power cord from physical

or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall

outlets, and the point where the cord exits the

appliance.

Do not make the TV with the power cord

plugged in. Do not use a damaged or loose

power cord. Be sure do grasp the plug when

unplugging the power cord. Do not pull on the

power cord to unplug the TV.

WARNING - To reduce the risk of fire or electrical

shock, do not expose this product to rain,

moisture or other liquids. Do not touch the TV

with wet hands. Do not install this product

near flammable objects such as gasoline or

candles or expose the TV to direct air

conditioning.

Do not expose to dripping or splashing and do

not place objects filled with liquids, such as

vases, cups, etc. on or over the apparatus (e.g.

on shelves above the unit).

GGRROOUUNNDDIINNGG

Ensure that you connect the earth ground wire

to prevent possible electric shock (i.e. a TV

with a three-prong grounded AC plug must be

connected to a three-prong grounded AC out-

let). If grounding methods are not possible,

have a qualified electrician install a separate

circuit breaker.

Do not try to ground the unit by connecting it

to telephone wires, lightening rods, or gas

pipes.

DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS

Mains plug is the disconnecting device. The

plug must remain readily operable.

"As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if you turn off this unit by SWITCH"

(Except 42/50PQ30C, 50/60PS60C)

Power

Supply

Short-circuit

Breaker

AANNTTEENNNNAASS

OOuuttddoooorr aanntteennnnaa ggrroouunnddiinngg

If an outdoor antenna is installed, follow the

precautions below. An outdoor antenna system

should not be located in the vicinity of over-

head power lines or other electric light or

power circuits, or where it can come in contact

with such power lines or circuits as death or

serious injury can occur.

Be sure the antenna system is grounded so as

to provide some protection against voltage

surges and built-up static charges.

Section 810 of the National Electrical Code

(NEC) in the U.S.A. provides information with

respect to proper grounding of the mast and

supporting structure, grounding of the lead-in

wire to an antenna discharge unit, size of

grounding conductors, location of antenna dis-

charge unit, connection to grounding elec-

trodes and requirements for the grounding

electrode.

AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthhee

NNaattiioonnaall EElleeccttrriiccaall CCoodde

e,, AANNSSII//NNFFPPAA 7700

CClleeaanniinngg

When cleaning, unplug the power cord and

scrub gently with a soft cloth to prevent

scratching. Do not spray water or other liquids

directly on the TV as electric shock may occur.

Do not clean with chemicals such as alcohol,

thinners or benzene.

MMoovviinngg

Make sure the product is turned off,

unplugged and all cables have been removed. It

may take 2 or more people to carry larger TVs.

Do not press against or put stress on the front

panel of the TV.

VVeennttiillaattiioonn

Install your TV where there is proper ventila-

tion. Do not install in a confined space such as

a bookcase. Do not cover the product with

cloth or other materials (e.g.) plastic while

plugged in. Do not install in excessively dusty

places.

If you smell smoke or other odors coming from

the TV or hear strange sounds, unplug the power

cord contact an authorized service center.

Do not press strongly upon the panel with

hand or sharp object such as nail, pencil or

pen, or make a scratch on it.

Keep the product away from direct sunlight.

Fil d entrée d antenne

Décharge d antenne

(section 810-20 du NEC)

Conducteur mis à la terre

(section 810-21 du NEC)

Pince de mise à la terre

Système d électrode

de mise à la terre (article 250,

section H du NEC)

Pince de mise à la terre

Équipement électrique

NEC: National Electrical Code

CONTENTS

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . A

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . 1

FEATURE OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Stand Instruction

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Desktop Pedestal Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Securing the TV to the wall to prevent falling

when the TV is used on a stand

. . . . . . . . . . . . . . . . . . . . . . . 14

Swivel Stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Antenna or Cable Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . 15

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Audio Out Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

USB Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

WATCHING TV / CHANNEL CONTROL

Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Turning On TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Initial Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Quick Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Channel Setup

- Auto Scan (Auto Tuning)

. . . . . . . . . . . . . . . . . . . . . . . . . . . 39

- Add / Delete Channel (Manual Tuning)

. . . . . . 40

- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Channel List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Favorite Channel Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Favorite Channel List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Brief Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Input Label

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

AV Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

SIMPLINK

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

USB

Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Photo List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Music List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Movie List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

DivX Registration Code

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

PICTURE CONTROL

Picture Size (Aspect Ratio) Control

. . . . . . . . . . . . . . . . . . 64

Picture Wizard

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Energy Saving

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preset Picture Settings(Picture Mode)

. . . . . . . . . . . . . . 69

Manual Picture Adjustment - User Mode

. . . . . . . . . . 70

Picture Improvement Technology

. . . . . . . . . . . . . . . . . . . . . 71

Expert Picture Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Image Sticking Minimization (ISM) Method

. . . . . . . 75

Demo Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 77

Clear Voice II

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Preset Sound Settings (Sound Mode)

. . . . . . . . . . . . . . 79

Sound Setting Adjustment - User Mode

. . . . . . . . . . .

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

TV Speakers On/Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Audio Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Stereo/SAP Broadcasts Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . 84

Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

On-Screen Menus Language Selection

. . . . . . . . . . . . . 86

Caption Mode

- Analog Broadcasting System Captions

. . . . . . . 87

- Digital Broadcasting System Captions

. . . . . . . . 88

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

TIME SETTING

Clock Setting

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

- Manual Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Auto On/Off Time Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Downloadable Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3

External Input Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Key lock

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Product Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Programming The Remote Control

. . . . . . . . . . . . . . . . .

110

IR Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

External Control Through RS-232C

. . . . . . . . . . . . . . . . .115

FEATURE OF THIS TV

is a trademark of SRS Labs, Inc.

TruSurround XT technology is incorporated under

license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories.

“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

■

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV

for an extended period, it can become permanently imprinted on the screen. This phenomenon is known

as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.

■

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period

(2 or more hours for LCD, 1 or more hours for Plasma).

■

Image burn can also occur on the letterboxed

areas of your TV if you use the 4:3 aspect

ratio setting for an extended period.

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN

/ BURN-IN” ON YOUR TV SCREEN

High-definition television. High-resolution digital

television broadcast and playback system composed

of roughly a million or more pixels, 16:9 aspect-ratio

screens, and AC3 digital audio. A subset of digital

television, HDTV formats include 1080i and 720p

resolutions.

THX Cinema mode is recommended for watching

movies. Designed for use in a dark room.

(This feature is not available for all models.)

This TV contains the detailed calibrations necessary

for professional certification by the Imaging Science

Foundation. The resulting ISF “day” and “night” modes

will then be accessible by the user to experience the

best their LG HDTV has to offer.

CALIBRATE LIKE A PRO: Sophisticated and detailed

calibrations can be made through the ISFccc mode.

Detailed calibration requires a licensed technician.

Please contact your local dealer to inquire about an ISF

certified technician.

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC."

■

This feature is not available for all models.

“DivX Certified to play DivX video, including premium

content”

ABOUT DIVX VIDEO: DivX

is a digital video format

created by DivX,Inc. This is an official DivX Certified

device that plays DivX video. Visit www.divx.com for

more information and software tools to convert your

files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX

Certified

device must be registered in order to play

DivX Video-on-Demand (VOD) content. To generate

the registration code, locate the DivX VOD section in

the device setup menu. Go to vod.divx.com with this

code to complete the registration process and learn

more about DivX VOD.

(This feature is not available for all models.)

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the

dealer where you purchased the TV.

The accessories included may differ from the images below.

Protection Cover

(Refer to P.11)

1.5V 1.5V

Owner’s Manual Power Cord

Remote Control,

Batteries

INPUT

UTE

Q. MENU

AV MODERETURN

ENTER

VOL

123

456

FLASHBK

DVD

LIST

ENERGY SAVING

STB

FAV

ARK

CD Manual

Bolts for stand assembly

(Refer to P.11)

x 4

Cable Holder

OOppttiioonn EExxttrraass

* Wipe spots on the exterior only with

the polishing cloth.

* Do not wipe roughly when removing

stain. Excessive pressure may cause

scratch or discoloration.

Polishing Cloth

(Not included with all models)

D-sub 15 pin Cable

When using the VGA (D-sub 15 pin

cable) PC connection, the user must

use shielded signal interface cables

with ferrite cores to maintain stan-

dards compliance.

x 2

FAV

MARK

LIST

123

456

FLASHBK

MUTE

VOL

RETURN

ENTER

INPUT

POWER

AV MODE

ENERGY SAVING

TIO

(Except 60PS60, 60PS60C,

60PS70, 60PS80)

Cable management

clip

(Refer to P.12)

(Only

60PS60, 60PS60C,

50/60PS70, 50/60PS80)

Install the power plug closely.

Use of ferrite core

(Not included with all models)

Ferrite core can be used to reduce the electromagnetic wave

when connecting the power cord.

The closer the location of the ferrite core to the power plug,

the better it is.

Ferrite Core

PREPARATION

FRONT PANEL INFORMATION

■

Image shown may differ from your TV.

VOL

INPUT

ENTER

VOL

INPUT

ENTER

INPUT

Button

POWER

Button

ENTER

Button

VOLUME

Buttons

CHANNEL

Buttons

42/50PQ20

VOL

INPUT

ENTER

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the TV is switched on.

Intelligent Sensor

Adjusts picture according to the

surrounding conditions.

Remote Control Sensor

When the TV cannot be turned on with the remote control, press the (power) button on the TV. (The

remote control will not work when the (power) button on the TV is switched off. )

CAUTION (Except

42/50PQ30C, 50/60PS60C)

VOL

INPUT

ENTER

VOL

CHANNEL

Buttons

VOLUME

Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

50/60PS70, 50/60PS80

Power/Standby Indicator

• Illuminates red in standby mode.

•

The LED is off while the TV remains on.

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to

the surrounding conditions.

Do not step on the glass stand or subject it to any impact.It

may break, causing possible injury from fragments of glass, or

the TV may fall.

Do not drag the TV. The floor or the product may be damaged.

VOL

INPUT

ENTER

VOL

INPUT

ENTER

INPUT

Button

ENTER

Button

VOLUME

Buttons

CHANNEL

Buttons

Power/Standby Indicator

Illuminates red in standby

mode.

Illuminates blue when the TV

is switched on.

42/50PQ30, 42/50PQ31, 42/50PQ30C, 42/50PS30

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to

the surrounding conditions.

POWER

Button

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates white when the TV is switched on

and goes out slowly .

42/50PQ60, 50/60PS60, 50/60PS60C

VOL

INPUT

ENTER

VOL

CHANNEL

Buttons

VOLUME

Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

Remote Control Sensor

Intelligent Sensor

Adjusts picture according to

the surrounding conditions.

PREPARATION

VOL

INPUT

ENTER

PREPARATION

BACK PANEL INFORMATION

■

Image shown may differ from your TV.

AV IN 2

L/MONO

AUDIO

VIDEO

USB IN

HDMI /

DVI IN 3

AV IN 2

L/MONO

AUDIO

VIDEO

USB IN

HDMI/DVI IN 3

HDMI/DVI IN 4

Only 42/50PQ60,

50/60PS60, 50/60PS60C,

50/60PS70,

50/60PS80

ANTENNA/

CABLE IN

HDMI/DVI IN

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN

(RGB/DVI)

COMPONENT IN

VIDEO

AUDIO

AV IN 1

VIDEO

S-VIDEO

REMOTE

CONTROL IN

/MONO

HDMI/DVI IN, HDMI IN

Digital Connection. Supports HD video and Digital

audio. Doesn’t support 480i.

Accepts DVI video using an adapter or HDMI to

DVI cable (not included)

OPTICAL DIGITAL AUDIO OUT

Optical digital audio output for use with amps and

home theater systems.

Note: In standby mode, this port doesn’t work.

RS-232C IN (CONTROL & SERVICE) PORT

Used by third party devices.

AUDIO IN (RGB/DVI)

1/8” headphone jack for analog PC audio input.

RGB IN (PC)

Analog PC Connection. Uses a D-sub 15 pin cable

(VGA cable).

REMOTE CONTROL IN PORT

For a wired remote control.

COMPONENT IN

Analog Connection. Supports HD.

Uses a red, green, and blue cable for video & red

and white for audio.

AV (Audio/Video) IN

Analog composite connection. Supports standard

definition video only (480i).

S-VIDEO

Better quality than standard composition.

Supports standard definition video only (480i).

ANTENNA/CABLE IN

Connect over-the air signals to this jack.

Connect cable signals to this jack.

USB IN

Used for viewing photos and listening to MP3.

Power Cord Socket

For operation with AC power.

Caution: Never attempt to operate the TV on DC

power.

PREPARATION

STAND INSTRUCTION

■

Image shown may differ from your TV.

Carefully place the TV screen side down on a

cushioned surface to protect the screen from

damage.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the

back of the TV.

Carefully place the TV screen side down on a

cushioned surface to protect the screen from

damage.

Loose the bolts from TV.

Detach the stand from TV.

After removing the stand, install the included

pprrootteeccttiioonn ccoovveerr

over the hole for the stand.

Press the

PPRROOTTEECCTTIIOONN CCOOVVEERR

into the TV

until you hear it click.

Protection Cover

When assembling the desk type stand, check

whether the bolt is fully tightened. (If not tight-

ened fully, the product can tilt forward after the

product installation). If you tighten the bolt with

excessive force, the bolt can deviate from abra-

sion of the tightening part of the bolt.

NOTE

Installation

Detachment

When assembling the stand, make sure to distinguish

and assemble the front and rear side of the stand

correctly.

(Except 60PS60, 60PS60C,

60PS70, 60PS80)

FRONT

PREPARATION

After connecting the cables as necessary, install

CABLE HOLDER as shown and bundle the

cables.

To connect additional equipment, see

EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT CLIP

as shown.

CABLE MANAGEMENT CLIP

Hold the CABLE MANAGEMENT CLIP with both

hands and pull it upward.

CABLE HOLDER

HOW TO REMOVE THE CABLE MANAGEMENT CLIP

(Only 60PS60, 60PS60C, 50/60PS70, 50/60PS80)

CABLE MANAGEMENT

■

Image shown may differ from your TV.

PREPARATION

VESA WALL MOUNTING

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please

contact your nearest installer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

We recommend that you use an LG brand wall mount when mounting the TV to a wall.

LG recommends that wall mounting be performed by a qualified professional installer.

Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.

CAUTION

Screw length needed depends on the wall mount

used. For further information, refer to the instruc-

tions included with the mount.

Standard dimensions for wall mount kits are shown

in the table.

When purchasing our wall mount kit, a detailed

installation manual and all parts necessary for

assembly are provided.

Do not use screws longer then the standard dimen-

sion, as they may cause damage to the inside to

the TV.

For wall mounts that do not comply with the VESA

standard screw specifications, the length of the

screws may differ depending on their specifica-

tions.

Do not use screws that do not comply with the

VESA standard screw specifications.

Do not use fasten the screws too strongly, this may

damage the TV or cause the TV to a fall, leading to

personal injury. LG is not liable for these kinds of

accidents.

LG is not liable for TV damage or personal injury

when a non-VESA or non specified wall mount is

used or the consumer fails to follow the TV installa-

tion instructions.

NOTE

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.

■

Image shown may differ from your TV.

4 inches

Ensure adequate ventilation by following

the clearance recommendations.

Do not mount near or above any type

of heat source.

CAUTION

Model

VESA (A

Standard Screw Quantity

Wall Mounting

bracket

(sold separately)

42PQ20, 42PQ30,

42PQ31, 42PQ30C,

42PQ60,

50PQ20, 50PQ30,

50PQ31, 50PQ30C,

50PQ60, 50PS30,

50PS60, 50PS60C,

50PS70, 50PS80

60PS60, 60PS60C,

60PS70, 60PS80

400

400 M6 4

600

400 M8 4

AW-50PG60MS

AW-60PG60MS

PREPARATION

SECURING THE TV TO THE WALL TO PREVENT FALLING

WHEN THE TV IS USED ON A STAND

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.

Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,

potentially causing injury or damaging the product.

Caution: Please make sure that children don’t climb on or hang from the TV.

■

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is

mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■

Use a sturdy rope (sold separately) to tie the product. It is safer to tie

the rope so it becomes horizontal between the wall and the product.

■

You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).

■

Image shown may differ from your TV.

Use a platform or cabinet strong enough and large enough to support

the size and weight of the TV.

To use the TV safely, make sure that the height of the bracket on the

wall and the one on the TV are the same.

NOTE

SWIVEL STAND

(This feature is not available for all models.)

After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your

viewing position.

PREPARATION

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box

Connection.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wall

Antenna

Socket

Outdoor

Antenna

(VHF, UHF)

Cable TV

Wall Jack

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Be careful not to bend the copper wire

when connecting the antenna.

Copper Wire

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

ANTENNA/

CABLE IN

( )

ANTENNA/

CABLE IN

( )

■

To prevent damage do not connect to the power outlet until all connections are made between the devices.

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do

receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

1. How to connect

Connect the video outputs

(

Y, PB, PR

)

of the digital set-

top box to the

CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11

jacks on

the TV. Match the jack colors (Y = green, P

B = blue, and

R = red).

Connect the audio output of the digital set-top box to

the

CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11

jacks on the TV.

2. How to use

■

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box. operation

)

■

Select the

CCoommppoonneenntt11

input source on the TV using the

IINNPPUUTT

button on the remote control.

■

If connected to

CCOOMMPPOONNEENNTT IINN 22

input, select the

CCoommppoonneenntt22

input source on the TV.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

Image shown may differ from your TV.

RGB IN (PC)

VI)

AUDIO

VIDEO

S-VIDEO

REMOTE

CONTROL IN

/MONO

COMPONENT IN

VIDEO

AUDIO

AV IN 1

Y L RPB PR

Y, CB/PB, CR/PR

Supported Resolutions

Horizontal Vertical

Frequency

(

KHz

)

Frequency

(

)

15.73 59.94

15.73 60.00

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

27.00 24.00

33.75 30.00

67.43 59.94

67.50 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

1920x1080p

Signal

480i

480p

720p

1080 i

1080 p

Component

Yes

HDMI

Yes

EXTERNAL EQUIPMENT SETUP

HDMI Connection

Connect the digital set-top box to

HHDDMMII//DDVVII IINN 11

(Only 42/50PQ60, 50/60PS60,

50/60PS60C,

50/60PS70, 50/60PS80

) jack on the

TV.

No separate audio connection is necessary.

HDMI supports both audio and video.

1. How to connect

2. How to use

■

Turn on the digital set-top box.

(

Refer to the owner’s manual for the digital set-top box.

)

■

Select the

HHDDMMII11

(Only 42/50PQ60, 50/60PS60,

50/60PS60C,

50/60PS70, 50/60PS80

) input source on the

TV using the

IINNPPUUTT

button on the remote control.

HDMI-DTV

Horizontal Vertical

Frequency

(

KHz

)

Frequency

(

)

31.469 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

27.00 24.00

33.75 30.00

67.43 59.94

67.50 60.00

Resolution

720x480p

1280x720p

1920x1080i

1920x1080p

HDMI/DVI IN

HDMI-DTV OUTPUT

RGB(PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

AUDIO

(RGB/DVI)

Check HDMI cable over version 1.3.

If the HDMI cables don’t support HDMI version

1.3, it can cause flickers or no screen display. In

this case use the latest cables that support HDMI

version 1.3.

NOTE

EXTERNAL EQUIPMENT SETUP

DVI to HDMI Connection

HDMI/DVI IN

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

REMOTE

CONTROL IN

AV IN 1

AUDIO IN

(RGB/DVI)

DVI-DTV OUTPUT

A DVI to HDMI cable or adapter is required for this

connection. DVI doesn't support audio, so a separate

audio connection is necessary.

NOTE

Connect the DVI output of the digital set-top box to the

HHDDMMII//DDVVII IINN 11

(Only 42/50PQ60,

50/60PS60, 50/60PS60C,

50/60PS70, 50/60PS80

)

jack on the TV.

Connect the audio output of the digital set-top box to

the

AAUUDDIIOO IINN ((RRGGBB//DDVVII))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the digital set-top box.

(

Refer to the owner’s man-

ual for the digital set-top box.

)

■

Select the

HHDDMMII11

(Only 42/50PQ60,

50/60PS60, 50/60PS60C,

50/60PS70, 50/60PS80

)

input source on the TV using the

IINNPPUUTT

button on the

remote control.

EXTERNAL EQUIPMENT SETUP

DVD SETUP

Component Connection

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

Video output ports

on DVD player

B-Y

R-Y

Connect the video outputs

(

Y, PB

, PR

)

of the DVD to the

CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11

jacks on the TV.

Match the jack colors

(

Y = green, P

B = blue, and PR = red

)

Connect the audio outputs of the DVD to the

CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11

jacks on the TV.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

CCoommppoonneenntt11

input source on the TV using

the

IINNPPUUTT

button on the remote control.

■

If connected to

CCOOMMPPOONNEENNTT IINN 22

input, select the

CCoommppoonneenntt22

input source on the TV.

■

Refer to the DVD player's manual for operating instructions.

RGB(PC)

DIO

B/DVI)

AUDIO

VIDEO

S-VIDEO

REMOTE

CONTROL IN

/MONO

COMPONENT IN

VIDEO

AUDIO

AV IN 1

Y L RPB PR

1 2

EXTERNAL EQUIPMENT SETUP

S-Video Connection

HDMI Connection

Connect the HDMI output of the DVD to the

HHDDMMII//DDVVII IINN 11

(Only 42/50PQ60,

50/60PS60, 50/60PS60C,

50/60PS70, 50/60PS80

)

jack on the TV.

No separate audio connection is necessary.

HDMI supports both audio and video.

1. How to connect

2. How to use

■

Select the

HHDDMMII11

(Only 42/50PQ60,

50/60PS60, 50/60PS60C,

50/60PS70, 50/60PS80

)

input source on the TV using the

IINNPPUUTT

button on the

remote control.

■

Refer to the DVD player's manual for operating instructions.

VIDEO

AUDIO

RGB(PC)

REMOTE

CONTROL IN

COMPONENT IN

L R

S-VIDEO

AUDIO

AV IN 1

S-VIDEO

/MONO

VIDEO

HDMI/DVI IN

(CONTROL & SERVICE)

HDMI-DVD OUTPUT

Connect the S-VIDEO output of the DVD to the

SS --VVIIDDEEOO

input on the TV.

Connect the audio outputs of the DVD to the

AAUUDDIIOO

input jacks on the TV.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

AAVV 11

input source on the TV using the

IINNPPUUTT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

EXTERNAL EQUIPMENT SETUP

VCR SETUP

Antenna Connection

AV IN 1

ANTENNA/

CABLE IN

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Wall Jack

Antenna

Connect the RF antenna out socket of the

VCR to the

AANNTTEENNNNAA//CCAABBLLEE IINN

socket

on the TV.

Connect the antenna cable to the RF

antenna in socket of the VCR.

1. How to connect

2. How to use

■

Set VCR output switch to 3 or 4 and then

tune TV to the same channel number.

■

Insert a video tape into the VCR and press

PLAY on the VCR.

(

Refer to the VCR owner’s

manual.

)

EXTERNAL EQUIPMENT SETUP

Composite (RCA) Connection

Connect the

AAUUDDIIOO

VVIIDDEEOO

jacks between TV and

VCR. Match the jack colors (Video = yellow, Audio Left

= white, and Audio Right = red)

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the

VCR.

(

Refer to the VCR owner’s manual.

)

■

Select the

AAVV 11

input source on the TV using the

IINNPPUUTT

button on the remote control.

■

If connected to

AAVV IINN 22

, select

AAVV22

input source on the

TV.

2. How to use

■

Insert a video tape into the VCR and press PLAY on the

VCR.

(

Refer to the VCR owner’s manual.

)

■

Select the

AAVV 11

input source on the TV using the

IINNPPUUTT

button on the remote control.

If you have a mono VCR, connect the audio cable

from the VCR to the

AAUUDDIIOO LL//MMOONNOO

jack of the

TV.

NOTE

VIDEO

AUDIO

RGB IN (PC)

UDIO IN

GB/DVI)

REMOTE

CONTROL IN

ANTE

CAB

S-VIDEO

COMPONENT IN

AUDIO

AV IN 1

VIDEO

/MONO

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

S-Video Connection

Connect the S-VIDEO output of the VCR to the

SS --VVIIDDEEOO

input on the TV.

Connect the audio outputs of the VCR to the

AAUUDDIIOO

input jacks on the TV.

1. How to connect

VIDEO

AUDIO

RGB IN (PC)

O IN

/DVI)

REMOTE

CONTROL IN

ANTENN

CABLE

COMPONENT IN

AUDIO

AV IN 1

S-VIDEO

/MONO

VIDEO

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Do not connect to both Video

and S-Video at the same time. In

the event that you connect both

Video and the S-Video cables,

only the S-Video will work.

CAUTION

S-Video provides better quality than composite. Use

it when available.

NOTE

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

AUDIO OUT CONNECTION

L R

VIDEO

AV IN 2

L/MONO

AUDIO

VIDEO

USB IN

HDMI IN 3

Camcorder

Video Game Set

Connect the

AAUUDDIIOO

VVIIDDEEOO

jacks

between TV and external equipment.

Match the jack colors

(

Video = yellow, Audio Left = white, and

Audio Right = red

)

1. How to connect

2. How to use

■

Select the

AAVV 22

input source on the TV using

the

IINNPPUUTT

button on the remote control.

■

If connected to

AAVV IINN 11

input, select the

AAVV 11

input source on the TV.

■

Operate the corresponding external equipment.

RGB(PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

AUDIO

(RGB/DVI)

HDMI/DVI IN

When connecting with external audio equipment, such as

amplifiers or speakers, you can turn the TV speakers off in

the menu. (

pp..8822

)

NOTE

Do not look into the optical output port. Looking at the laser beam may damage your vision.

Audio with ACP (Audio Copy Protection) function may block digital audio output.

CAUTION

Connect one end of the optical cable to the TV’s

OOPPTTIICCAALL

port of

DDIIGGIITTAALL AAUUDDIIOO OOUUTT

Connect the other end of the optical cable to the digital

audio input on the audio equipment.

Set the “TV Speaker option - Off” in the AUDIO menu. (

pp..

8822

See the external audio equipment instruction manual for

operation.

1. How to connect

Send the TV’s audio to external audio equipment via the Audio Output port.

EXTERNAL EQUIPMENT SETUP

USB CONNECTION

AV IN 2

L/MONO

AUDIO

VIDEO

USB IN

HDMI /

DVI IN 3

Connect the USB device to the

UUSSBB II NN

jack on the side

of TV.

1. How to connect

2. How to use

■

After connecting the

UUSSBB II NN

jack, you use the USB func-

tion. (

pp..5500

)

i.e)

EXTERNAL EQUIPMENT SETUP

PC SETUP

DVI to HDMI Connection

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

VGA (D-Sub 15 pin) Connection

VID

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

REMOTE

CONTROL IN

S-VID

AV IN 1

DMI/DVI IN

RGB IN (PC)

AUDIO IN

(RGB/DVI)

AUDIO

RGB OUTPUT

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

REMOT

CONTROL

AUDIO IN

(RGB/DVI)

HDMI/DVI IN

DVI-PC OUTPUT AUDIO

2. How to use

■

Turn on the PC and the TV.

■

Select the

RRGGBB--PPCC

input source on the TV using the

IINNPPUUTT

button on the remote control.

Connect the VGA output of the PC to the

RRGGBB IINN

((

PP CC

))

jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO IINN

((

RRGGBB//DDVVII

))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select the

HHDDMMII11

(Only 42/50PQ60,

50/60PS60, 50/60PS60C,

50/60PS70, 50/60PS80

)

input source on the TV using the

IINNPPUUTT

button on the

remote control.

Connect the DVI output of the PC to the

HHDDMMII//DDVVII

IINN 11

(Only 42/50PQ60, 50/60PS60,

50/60PS60C,

50/60PS70, 50/60PS80

) jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO IINN

((RRGGBB//DDVVII))

jack on the TV.

1. How to connect

EXTERNAL EQUIPMENT SETUP

42/50PQ20, 42/50PQ30, 42/50PQ31,

42/50PQ30C, 42/50PQ60: To get the the

best picture quality, adjust the PC graphics

card to 1360x768.

50PS30, 50/60PS60, 50/60PS60C,

50/60PS70, 50/60PS80

: To get the the best

picture quality, adjust the PC graphics card to

1920x1080.

Depending on the graphics card, DOS mode

may not work if a HDMI to DVI Cable is in use.

In PC mode, there may be noise associated

with the resolution, vertical pattern, contrast

or brightness. If noise is present, change the

PC output to another resolution, change the

refresh rate to another rate or adjust the

brightness and contrast on the PICTURE menu

until the picture is clear.

Avoid keeping a fixed image on the screen for a

long period of time. The fixed image could

become permanently imprinted on the screen.

The synchronization input form for Horizontal

and Vertical frequencies is separate.

Depending on the graphics card, some resolu-

tion settings may not allow the image to be

NOTES

Supported Display Specifications

(RGB-PC, HDMI-PC)

Resolution

720x400

1360x768

640x480

800x600

1024x768

1920x1080

1280x768

Horizontal Vertical

Frequency

(

KHz

)

Frequency

(

)

31.468 70.08

31.469 59.94

37.879 60.31

48.363 60.00

47.78 59.87

47.72 59.80

66.647 59.988

EXTERNAL EQUIPMENT SETUP

Auto Configure

Automatically adjusts picture position and minimizes

image instability. After adjustment, if the image is still

not correct, try using the manual settings or a differ-

ent resolution or refresh rate on the PC.

Select

SSccrreeeenn ((RRGGBB--PPCC))

Select

AAuuttoo ccoonnffiigg..

Auto config.

Resolution

Position

Size

Phase

Reset

Screen

Move

To Set

ENTER

Select

YY eess

ENTER

Start Auto Configuration.

ENTER

Select

PPIICCTTUURREE

• If the position of the image is still not correct, try Auto adjustment again.

• If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the

PPoossiittiioonn

SSiizzee

PPhhaassee

Yes No

Screen Setup for PC mode

Selecting Resolution

You can choose the resolution in RGB-PC mode.

The

PPoossiittiioonn

PPhhaassee

, and

SSiizzee

can also be adjusted.

Select

PPIICCTTUURREE

Select

SSccrreeeenn ((RRGGBB--PPCC))

Select

RReessoolluuttiioonn

Select the desired resolution.

1024 x 768

1280 x 768

1360 x 768

Auto config.

Resolution

Position

Size

Phase

Reset

Screen

Move

Prev.

ENTER

Enter

Move

PICTURE

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

Prev.

EXTERNAL EQUIPMENT SETUP

Adjustment for screen Position, Size, and Phase

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture

phase manually.

This feature operates only in RGB-PC mode.

Select

PPoossiittiioonn

SSiizzee

, or

PPhhaassee

Make appropriate adjustments.

Auto config.

Resolution

Position

Size

Phase

Reset

Screen

Move

ENTER

■

PPoossiittiioonn

: This function is to adjust pic-

ture to left/right and up/down as you

prefer.

■

SSiizzee

: This function is to minimize any

vertical bars or stripes visible on the

screen background. And the horizontal

screen size will also change.

■

PP hh aa ss ee

: This function allows you to

remove any horizontal noise and clear or

sharpen the image of characters.

Select

PPIICCTTUURREE

Select

SSccrreeeenn ((RRGGBB--PPCC))

ENTER

Enter

Move

PICTURE

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

ENTER

Prev.

EXTERNAL EQUIPMENT SETUP

Screen Reset (Reset to original factory values)

Returns

PPoossiittiioonn

SSiizzee

, and

PPhhaassee

to the default factory settings.

This feature operates only in RGB-PC mode.

Select

RReesseett

ENTER

Select

PPIICCTTUURREE

Select

SSccrreeeenn ((RRGGBB--PPCC))

ENTER

Select

YY eess

ENTER

Auto config.

Position

Resolution

Size

Phase

Reset

Screen

Move

Initialize Settings.

Enter

Move

PICTURE

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

Yes No

Prev.

WATCHING TV / CHANNEL CONTROL

REMOTE CONTROL FUNCTIONS

WATCHING TV / CHANNEL CONTROL

When using the remote control, aim it at the remote control sensor on the TV.

INPUT

MUTE

POWER

Q. MENU MENU

AV MODERETURN

ENTER

VOL

123

456

FLASHBK

DVD

LIST

ENERGY SAVING

STB

FREEZE

RATIO

FAV

MARK

NUMBER button

VCR, USB,

SIMPLINK

Control buttons

42/50PQ60, 50PS30, 50/60PS60, 50/60PS60C,

50/60PS70, 50/60PS80

Select the remote operating mode: TV, STB or DVD.

Turns the TV on from standby or off to standby.

Adjusts the Energy Saving.

Opens the list of Quick Menu options.

pp..3388

Displays the main menu or clears all on-screen displays and

returns to TV viewing.

Rotates through inputs.

Also switches the TV on from standby.

pp..4455

Used to enter a program number for multiple program

channels such as 2-1, 2-2, etc.

Displays the channel list.

Tunes to the last channel viewed.

Controls USB menu (PHOTO LIST and MUSIC LIST).

Controls the SIMPLINK compatible devices.

See a list of AV devices connected to TV.

When you toggle this button, the SIMPLINK menu appears

at the screen.

pp..4488--4499

Changes the aspect ratio of the video.

pp..6644

Freezes the current frame.

TV/STB/DVD

POWER

ENERGY SAVING

Q.MENU

INPUT

— (DASH)

LIST

FLASHBK

SIMPLINK

RATIO

FREEZE

WATCHING TV / CHANNEL CONTROL

Installing Batteries

■

Open the battery compartment cover on the back side and install

the batteries matching correct polarity.

■

Install two 1.5V AAA batteries. Don’t mix old or used batteries with

new ones.

■

Close cover.

THUMBSTICK

(Up/Down/Left

Right/ENTER)

RETURN

INFO

AV MODE

VOLUME UP

/DOWN

FAV

MARK

MUTE

CHANNEL

UP/DOWN

PAGE

UP/DOWN

Navigates the on-screen menus and adjusts the system settings to your preference.

Allows the user to move return one step in an interactive application or other user interaction

function.

Displays channel information at the top of the screen.

Toggles through preset Video and Audio modes.

pp..4477

Adjusts the volume.

Scroll through the programmed Favorite channels.

pp..4433

Use to mark or unmark a photo/music

pp..5522

Switches the sound on or off.

pp..3344

Changes the channel.

Moves from one full set of screen information to the next one.

WATCHING TV / CHANNEL CONTROL

FAV

MARK

Q.MENU

LIST

123

456

FLASHBK

MUTE

VOL

RETURN

INFO

ENTER

INPUT

POWER

AV MODE

ENERGY SAVING

FREEZE

RATIO

42/50PQ20, 42/50PQ30, 42/50PQ31, 42/50PQ30C

INFO

AV MODE

POWER

INPUT

ENERGY SAVING

VOLUME UP

/DOWN

MUTE

CHANNEL

UP/DOWN

PAGE

UP/DOWN

Q.MENU

SIMPLINK

FREEZE

RATIO

FAV

MARK

Displays channel information at the top of the screen.

Toggles through preset Video and Audio modes.

pp..4477

Turns the TV on from standby or off to standby.

Rotates through inputs.

Also switches the TV on from standby.

pp..4455

Adjusts the Energy Saving.

Adjusts the volume.

Switch the sound on or off.

pp..3344

Changes the channel.

Moves from one full set of screen information to the next

one.

Controls USB menu (PHOTO LIST and MUSIC LIST).

Controls the SIMPLINK compatible devices.

Opens the list of Quick Menu options.

pp..3388

See a list of AV devices connected to TV.

When you toggle this button, the SIMPLINK menu appears

at the screen.

pp..4488--4499

Freezes the current frame.

Changes the aspect ratio of the video.

pp..6644

Scroll through the programmed Favorite channels.

pp..4433

Use to mark or unmark a photo/music

pp..5522

VCR, USB,

SIMPLINK

Control buttons

WATCHING TV / CHANNEL CONTROL

Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.

Displays the channel list.

Tunes to the last channel viewed.

Navigates the on-screen menus and adjusts the system settings to your preference.

Displays the main menu or clears all on-screen displays and returns to TV viewing.

Allows the user to move return one step in an interactive application or other user interac-

tion function.

— (DASH)

LIST

FLASHBK

THUMBSTICK

(Up/Down/Left

Right/ENTER)

RETURN

NUMBER button

Installing Batteries

■

Open the battery compartment cover on the back and install the

batteries matching correct polarity.

■

Install two 1.5V AAA batteries. Do not mix old or used batteries

with new ones.

■

Close cover.

WATCHING TV / CHANNEL CONTROL

TURNING ON TV

WATCHING TV / CHANNEL CONTROL

NOTE

If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

If the TV is unplugged once or turn off with the (power) button on the TV, reset the

CClloocckk

func-

tion.

First, connect power cord correctly.

At this moment, TV is in standby mode.

■

In standby mode to turn TV on, press the

IINNPPUUTT

CCHH ((

))

button

on the TV or press the

PPOOWWEERR

IINNPPUUTT

CCHH((

))

NNuummbbeerr ((00

99))

button on the remote control.

Select the viewing source by using the

IINNPPUUTT

button on the remote control.

When finished using the TV, press the

PPOOWWEERR

button on the remote control. The TV reverts to standby

mode.

Press the

CCHH ((

))

NNUUMMBBEERR

buttons to select a channel number.

VOLUME ADJUSTMENT

CHANNEL SELECTION

Adjust the volume to suit your personal preference.

Press the

VVOOLL ((++

--))

button to adjust the volume.

If you want to switch the sound off, press the

MMUUTTEE

button.

You can cancel the Mute function by pressing the

MMUUTTEE

VVOOLL ((++

--))

button.

(Only 42/50PQ30C, 50/60PS60C)

(Except 42/50PQ30C, 50/60PS60C)

WATCHING TV / CHANNEL CONTROL

INITIAL SETTING

This Function guides the user to easily set the essential items for viewing the TV for the first time when pur-

chasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be acti-

vated from the user menus.

Select

HHoommee UUssee

mode.

ENTER

Selecting the environment.

Choose the setting mode you want.

Store Demo

Home Use

Previous Next

Mode Setting

Step2. Mode setting

■

Default selection is “

HHoommee UUssee

”. We recommend setting the TV to “

HHoommee UUssee

” mode for the best picture

in your home environment.

■

“

SSttoorree DDeemmoo

” Mode is only intended for use in retail environments. Customers can adjust the “

PPiiccttuurree

menu -

PPiiccttuurree mmooddee

” manually while inspecting the TV, but the TV will automatically return to preset in-

store mode after 5 minutes.

■

You can also adjust

IInniittiiaall SSeettttiinngg

in the

OOPPTTIIOONN

menu.

Factory defaults are set when you choose “

HHoommee UUssee

”.

■

If you do not complete the

IInniittiiaall sseettttiinngg

, it will appear whenever the TV is switched on until the

IInniittiiaall

sseettttiinngg

procedure is completed.

Select [Home Use] to use this TV at

home.

Select

menu Language

ENTER

Español

Français

Language

English

Step1. Language Selecting

WATCHING TV / CHANNEL CONTROL

Select

AAuuttoo

MMaannuuaall

Select desired time option.

ENTER

Year

Current Time Setting

2007

Month

Date

Hour

5 PM

Minute

Time Zone

Eastern

Daylight Saving

Off

Auto

Time Setting

Step3. Time setting

Start

AAuuttoo TTuunniinngg

ENTER

Check your antenna connection.

The previous channel information will be updated

during Auto Tuning.

Auto Tuning

Step4. Auto Tuning

WATCHING TV / CHANNEL CONTROL

ON-SCREEN MENUS SELECTION

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

Display each menu.

Select a menu item.

Accept the current selection.

ENTER

Return to TV viewing.

Enter

Move

Auto Tuning

Manual Tuning

Channel Edit

CHANNEL

OPTION

PICTURE

LOCK

AUDIO

INPUT

TIME

USB

Enter

Move

Aspect Ratio : 16:9

Picture Wizard

Energy Saving : Off

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

PICTURE

Enter

Move

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

AUDIO

Enter

Move

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

TIME

Enter

Move

Photo List

Music List

USB

Enter

Move

AV1

AV2

Component1

Component2

RGB-PC

HDMI1

HDMI2

HDMI3

INPUT

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Enter

Move

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

OPTION

For USA

For Canada

Only

50/60PS60, 50/60PS60C

Enter

Move

Photo List

Music List

Movie List

DivX Reg. Code

Deactivation

USB

(Only

50/60PS70, 50/60PS80)

USB

WATCHING TV / CHANNEL CONTROL

WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL

QUICK MENU

Display each menu.

Make appropriate adjustments.

■

AAssppeecctt RRaattiioo

: Selects your desired picture format.

■

PPiiccttuurree MMooddee

: Selects the factory preset picture depend on the viewing environment.

■

SSoouunndd MMooddee

: Selects the factory preset sound for type of program.

■

CCaappttiioonn

: Select on or off.

■

MMuullttii AAuuddiioo

: Changes the audio language (Digital signal).

SSAAPP

: Selects MTS sound (Analog signal).

■

SSlleeeepp TTiimmeerr

: Select the amount of time before your TV turns off automatically.

■

DDeell//AAdddd//FFaavv

: Select channel you want to add/delete or add the channel to the Favorite List.

■

EEjjeecctt UUSSBB

: Select “Eject” in order to eject a USB device.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.

Q.Menu (Quick Menu) is a menu of features which users might use frequently.

Q. MENU

Return to TV viewing.

Q.Menu

16:9

Vivid

Standard

Off

English

Off

Add

Eject

Aspect Ratio

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

Eject USB

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the

channel list.

Select

CCHHAANNNNEELL

Select

AAuuttoo TTuunniinngg

Select

YY eess

ENTER

■

The TV will ask for a password if parental

control has been activated (Lock Menu).

Use the password you set up in the Lock

Menu to allow a channel search.

■

When setting the Auto tuning or Manual

tuning, the number of maximum channel

you can store is 900. It is subject to

change depending on the broadcasting

signal environment.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Press ‘Yes’ button to begin

auto tuning.

Yes

Processing Auto Tuning...

Next(TV)

23% DTV Channel 8

DTV : 0 Found Channel(s)

ATV : 0 Found Channel(s)

Run

AAuuttoo TTuunniinngg

ENTER

WATCHING TV / CHANNEL CONTROL

Select

CCHHAANNNNEELL

ENTER

If you select DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quali-

ty of the signal being received.

Add/Delete Channel (Manual Tuning)

Select

MMaannuuaall TTuunniinngg

Select

DDTTVV

TT VV

CCAADDTTVV

, or

CCAATTVV

Select channel you want to add

or delete.

ENTER

Select

AAdddd

DDeelleettee

ENTER

■

The TV will ask for a password if parental

control has been activated (Lock Menu).

Use the password you set up in the Lock

Menu to allow a channel search.

■

When setting the Auto tuning or Manual

tuning, the number of maximum channel

you can store is 900. It is subject to

change depending on the broadcasting

signal environment.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel

Select channel type and

RF-channel number.

DTV

Delete

DTV 2-1

Bad Normal Good

WATCHING TV / CHANNEL CONTROL

Select a channel.

Add or delete the channel.

ENTER

When a channel number is deleted, it means that you will be unable to select it using CH , button during

TV viewing.

If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select

it in the Channel Edit menu.

Channel Editing

Select

CCHHAANNNNEELL

ENTER

Select

CChhaannnneell EEddiitt

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Ch.Change

Move Page

Move

Add/Delete

RETURN

Return to the previous menu.

Return to TV viewing.

WATCHING TV / CHANNEL CONTROL

CHANNEL LIST

You can check channels which are stored in the memory by displaying the channel list.

Display the

CChhaannnneell LLiisstt

LIST

Displaying Channel List

Select a channel.

Switch to the chosen channel number.

ENTER

Selecting a channel in the channel list

Turn the pages.

Return to TV viewing.

RETURN

Paging through a channel list

Channel List

Exit

DTV

15-1

83-0

18-2

DTV

This padlock is displayed

when the channel is locked

with parental control

WATCHING TV / CHANNEL CONTROL

FAVORITE CHANNEL SETUP

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.

Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting

for the TV to select through all the in-between channels.

To tune to a favorite channel, press the

FFAAVV

(Favorite) button repeatedly.

Select

DDeell//AAdddd//FFaavv

Q. MENU

456

Select your desired channel.or

Select

FFaavvoorriittee

Q. MENU

Return to TV viewing.

Q.Menu

Vivid

Standard

Off

English

Off

Eject

Aspect Ratio

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

Eject USB

Favorite

16:9

FAVORITE CHANNEL LIST

Select a channel.

Switch to the chosen channel number.

ENTER

Selecting a channel in the favorite channel list

Turn the pages.

Return to TV viewing.

RETURN

Paging through a favorite channel list

Display the Favorite channel list.

Displaying the favorite channel list

Exit

DTV

15-1

83-0

18-2

DTV

Favorite List

FAV

MARK

FAV

MARK

WATCHING TV / CHANNEL CONTROL

BRIEF INFORMATION

Brief Info shows the present screen information.

No Program Information.

Wed, Aug 21, 2009 10:10 AM 11:40 AM

CNN

DOLBY DIGITAL

10:40 AM

Multilingual Caption 1080i MPAA PG

2 3 4 5 6 7

MMuullttiilliinngguuaall

: The program contains two or more audio services. Use

the

QQ..MMEENNUU

menu to select wanted Audio.

CCaappttiioonn

: The program contains one or more caption services. Use

the

QQ..MMEENNUU

menu to select wanted Closed caption.

The original aspect ratio of the video is 4:3

The original aspect ratio of the video is 16:9 (wide)

The video resolution is 720x480i

The video resolution is 720x480p

The video resolution is 1280x720p

The video resolution is 1920x1080i

The video resolution is 1920x1080p

VV--CChhiipp

: The program contains V-Chip information. Refer to the

LOCK menu: A (Age), D (Dialogue), L (Language), S (Sex), V

(Violence), FV (Fantasy Violence)

480i

480p

720p

1080i

1080 p

4:3

16:9

Show the Brief Info on the screen.

RETURN

Return to TV viewing

Program title

Day, Month, Year

Program start time

Program progress bar

Program finish time

Present time

Banner information

INFO i

ENTER

WATCHING TV / CHANNEL CONTROL

INPUT LIST

Only these input signals which are connected to a TV can be activated and selected.

Select the desired input source.

TV AV1 AV2 Component1

HDMI3

HDMI2 HDMI1 RGB-PC

Component2

TV AV1 AV2 Component1 Component2

ENTER

■

TT VV

: Select it to watch over-the-air, cable and digital

cable broadcasts.

■

AAVV 11--22

: Select them to watch a VCR or other exter-

nal equipment.

■

CCoommppoonneenntt 11--22

: Select them to watch DVD or a

Digital set-top box.

■

RRGGBB--PPCC

: Select it to view PC input.

■

HHDDMMII11--33

11--44

: Select them to watch high defi-

nition devices.

HDMI4

HDMI3

INPUT

■

When new external device is connected, this popup menu is displayed automatically.

If selecting

YY eess

, you can select input source that you want to appreciate.

■

But, when selecting “

SSIIMMPPLLIINNKK

OO nn

”, popup menu for HDMI input will not be displayed.

Yes

New external device is connected.

Do you want to enjoy this?

Select input source that you want to appreciate.

AV1

AV2

Component1

Input Label

Exit

Select a desired input source (except

TT VV

Then, you can select your desired

IInnppuutt

LLaabbeell

with using Blue button.

pp..4466

ie)

ie) In case of changing the input label with using Blue button

TV AV1 AV2 Component1 Component2

Disconnected inputs are inactive (grayed out)

WATCHING TV / CHANNEL CONTROL

INPUT LABEL

You can set a label for each input source when it's not in use.

Select

OOPPTTIIOONN

Select

IInnppuutt LLaabbeell

Select the label.

ENTER

Select the source.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

With using OPTION menu

Select the

source(except

TT VV

Select the label.

RETURN

Return to the previous menu.

Return to TV viewing.

With using INPUT button

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

AV1

AV2

Component1

Component2

RGB-PC

HDMI1

HDMI2

HDMI3

HDMI4

FF GG

Only 42/50PQ60,

50/60PS60, 50/60PS60C,

50/60PS70, 50/60PS80

INPUT

WATCHING TV / CHANNEL CONTROL

AV MODE

AV Mode toggles through preset Video and Audio settings.

AV MODE

Off Cinema

Game Sport

Press the

AAVV MMOODDEE

button repeatedly to select the desired source.

■

If you select “

CCiinneemmaa // CCiinneemmaa

”

in AV mode,

CCiinneemmaa

will be selected

both for “PICTURE menu - Picture

Mode” and “AUDIO menu - Sound

Mode” respectively.

■

If you select “

OOffff

” in AV mode, the

“

PPiiccttuurree MMooddee

” and “

SSoouunndd MMooddee

”

return to previous selected value.

■

OOffff

: Disables the AV MODE.

■

CCiinneemmaa

: Optimizes video and audio for

watching movies.

■

SSppoorrtt

: Optimizes video and audio for

watching sports events.

■

GGaammee

: Optimizes video and audio for

playing games.

ENTER

Cinema

(Only 50/60PS60. 50/60PS60C,

50/60PS70, 50/60PS80)

WATCHING TV / CHANNEL CONTROL

Simplink allows you to control and play other AV devices connected with HDMI cable without additional

cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the

logo are fully supported.

SIMPLINK can be turned on and off in the user menus.

Select

OOPPTTIIOONN

Select

SSIIMMPPLLIINNKK

Select

OOnn

OOffff

ENTER

NOTE

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIM-

PLINK device with the HDMI cable.

When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will

stop.

When you select a device with home theater functionality, the sound output automatically switches to the

home theater speakers and the TV speakers are turned off.

If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL

AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIM-

PLINK device with an OPTICAL cable.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Off

E E

WATCHING TV / CHANNEL CONTROL

■

DDiirreecctt PPllaayy::

After connecting AV devices to the TV, you can directly control the devices and play media with-

out additional settings.

■

SSeelleecctt AAVV ddeevviiccee::

Enables you to select one of the AV devices connected to TV.

■

DDiisscc ppllaayybbaacckk::

Control connected AV devices by pressing the ,

ENTER,

ll ll

and

buttons.

■

PPoowweerr ooffff aallll ddeevviicceess::

When you power off the TV, all connected devices are turned off.

■

SSwwiittcchh aauuddiioo--oouutt::

Offers an easy way to switch audio-out.

■

SSyynncc PPoowweerr oonn::

When the equipment with Simplink function connected HDMI terminal starts to play, The TV

will change automatically to turn on mode.

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide

this function)

Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer

Electronics Control).

SIMPLINK Menu

TTVV vviieewwiinngg

: Switch to the previous TV

channel regardless of the current mode.

DDIISSCC ppllaayybbaacckk

: Select and play discs.

When multiple discs are available, the titles

of discs are conveniently displayed at the

bottom of the screen.

VVCCRR ppllaayybbaacckk

: Control the connected

VCR.

HHDDDD RReeccoorrddiinnggss ppllaayybbaacckk

: Control

recordings stored in HDD.

AAuuddiioo OOuutt ttoo HHoommee TThheeaatteerr ssppeea

akk--

eerr//AAuuddiioo OOuutt ttoo TTVV

: Select Home

Theater speaker or TV speaker for Audio

Out.

SIMPLINK Functions

When no device is con-

nected (displayed in gray)

Selected Device

When a device is connected

(displayed in bright color)

Display

SSIIMMPPLLIINNKK

menu.

Select the desired device.

Control connected AV devices.

ENTER

FF GG

Move

FF GG

Change Device

Select

FF GG

Move

FF GG

Change Device

Select

FF GG

Move

FF GG

Change Device

Select

USB

ENTRY MODES

When you connect a USB device, this screen is displayed automatically.

In USB device, you can not add a new folder or delete the existing folder.

Precautions when using the USB device

Only a USB storage device is recognizable.

If the USB storage device is connected through a USB

hub, the device is not recognizable.

A USB storage device using an automatic recognition

program may not be recognized.

A USB storage device which uses its own driver may

not be recognized.

In case of a card reader, up to four memory cards are

concurrently recognizable.

The recognition speed of a USB storage device may

depend on each device.

Please do not turn off the TV or unplug the USB

device when the connected USB storage device is

working. When such device is suddenly separated or

unplugged, the stored files or the USB storage device

may be damaged.

Only use a USB storage device which has normal

music files or image files.

Please use only a USB storage device which was for-

matted as a FAT16, FAT32 or NTFS file system pro-

vided with the Windows operating system. In case of

a storage device formatted as a different utility pro-

gram which is not supported by Windows, it may not

be recognized.

Please connect power to a USB storage device which

requires an external power supply. If not, the device

may not be recognized.

Please connect a USB storage device with cable is

offered by USB maker. If connected with cable is not

offered by USB maker or an excessively long cable,

the device may not be recognized.

Some USB storage devices may not be supported or

operate properly.

The TV will display up to 128 characters of a files

name.

Please backup important files because data on USB

device may be damaged. Data management is con-

sumer's responsibility and as a result, the manufactur-

er does not cover data damage.

The recommended capacity is 1TB or less for a USB external

hard disk and 32GB or less for USB memory.

Any device with more than the recommended capacity may

not work properly.

When removing the USB device

Connect the USB device to the

UUSSBB IINN

jacks on the side of TV.

Select

PPhhoottoo LLiisstt,, MMuussiicc LLiisstt

MMoovviiee LLiisstt

MI IN 3 USB IN

Select

EEjjeecctt UUSSBB

Select the

EEjjeecctt UUSSBB

menu before removing the

USB device.

ENTER

Q. MENU

ENTER

■

It doesn’t support USB HDD.

■

This TV supports JPG and MP3 files.

Select

EEjjeecctt

In order to avoid losing the USB memory stick, use

the USB connector to fix the USB memory stick to the

USB connector holder of the TV.

NOTE

USB Input

Port

USB Connector (sold separately)

- Fix the one end of the USB connector to

the USB memory stick and the other end

to the USB connector holder.

USB connector holder

Photo List Music List

Movie list

Only

50/60PS70,

50/60PS80

PHOTO LIST

USB

You can view (

.JPG) files from USB storage devices.

The On Screen Display on your model may be slightly different.

Screen Components

Moves to upper level file

Preview: Display the

thumbnail/folder name of

the photo in the selected

folder

Current page/Total pages

Total number of marked photos

Usable USB memory

Corresponding buttons on

the remote control

Supported photo file:

.JPG

■

You can play JPG files only.

■

Only baseline scan is supported among JPG.

USB Device

Page 1/1

No Marked

PHOTO LIST

Up Folder

Free Space 150MB

Move PopUp Menu Move Page Mark

0 folder, 4 file(s)

3 4

Select

UUSS BB

Select

PPhhoottoo LLiisstt

Top Folder

DriveA

ENTER

DriveA

MARK

Exit

USB

Photo Selection and Popup Menu

USB Device

Page 1/1

No Marked

PHOTO LIST

Up Folder

Free Space 150MB

0 folder, 4 file(s)

USB Device

Page 1/1

No Marked

PHOTO LIST

Up Folder

Free Space 150MB

1366

768 125KB

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

■

Use the

CCHH

button to navigation in the

photo page.

■

Use the

MMAARRKK

button to mark or unmark a

photo. When one or more photos are marked,

you can view individual photos or a slide show

of the marked photos. If no photos are marked,

you can view all photos individually or all pho-

tos in the folder in a slide show.

Top Folder

DriveA

Select the desired Popup menu.

ENTER

Move Move Page

Mark

MARK

PopUp Menu

Move Move Page

Mark

MARK

PopUp Menu

DriveA

Butterfly

Up Folder

Photo

X.Box

1366x768, 125KB

View

Mark All

Delete

When you select a file (not folder), this PopUp

menu is displayed.

VViieeww

: Display the selected item.

MMaarrkk AAllll

: Mark all photos on the screen.

UUnnmmaarrkk AAllll

: Deselect all marked photos.

DDeelleettee

: Delete the selected photo item.

CClloossee

: Close the pop-up menu.

DSC0001

DSC0002

DSC0003

DSC0004

Exit

USB

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full

screen mode.

■

Use the

CCHH

button to navigation in the

photo page.

The aspect ratio of a photo may change the size of

the photo displayed on the screen in full size.

1/17

Slideshow BGM Delete Option Hide

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

Select

VViieeww

The selected photo is displayed in

full size.

ENTER

USB Device

Page 1/1

No Marked

PHOTO LIST

Up Folder

Free Space 150MB

0 folder, 4 file(s)

USB Device

Page 1/1

No Marked

PHOTO LIST

Up Folder

Free Space 150MB

1366

768 125KB

Top Folder

DriveA

Butterfly

1366x768, 125KB

View

Mark All

Delete

Up Folder

Photo

X.Box

DSC0001

DSC0002

DSC0003

DSC0004

Move Move Page

Mark

MARK

PopUp Menu

Exit

Move Move Page

Mark

MARK

PopUp Menu

Exit

USB

1/17

Slideshow BGM Delete Option Hide

Select the

SSlliiddeesshhooww

BBGGMM

((RRoottaattee))

DDeelleettee

OOppttiioonn

, or

HHiiddee..

Press

FF GG

to set the time interval

between slides.

Slide Speed

Fast

Cancel

...

Music Folder

Enter

■

Use button to select the previous or

next photo.

■

Use button to select and control

the menu on the full-sized screen.

ENTER

SSlliiddeesshhooww

: Selected photos are displayed during the

slide show. If no photo is selected, all photos in the cur-

rent folder are displayed during slide show.

■

Set the time interval of the slide show in

OOppttiioonn

BBGGMM

: Listen to music while viewing photos in full size.

■

Set the BGM device and album in

OOppttiioonn

((RRoottaattee))

: Rotate photos.

■

Rotates the photo 90°, 18 0 °, 270°, 360° clockwise.

DDeelleettee

: Delete photos.

OOppttiioonn

: Set values for

SSlliiddee SSppeeeedd

and

MMuussiicc

FFoollddeerr

■

Use button and

EENNTTEERR

button to set values.

Then go to and press

EENNTTEERR

to save the set-

tings.

■

You cannot change

MMuussiicc FFoollddeerr

while BGM is

playing.

HHiiddee

: Hide the menu on the full-sized screen.

■

To see the menu again on the full-sized screen, press

EENNTTEERR

button to display.

NOTE

This TV will not be able to decode

most JPEG images saved using the

Progressive option.

MUSIC LIST

USB

You can use the Music List menu to play MP3 files form a USB storage device.

This TV cannot play back copy-protected files.

The On Screen Display on your model may be slightly different.

Screen Components

Supported music file:

.MP3

Bit rate range 8Kbps ~ 320Kbps

• Sampling rate (Sampling Frequency)

MPEG1Layer 3 : 8KHz ~ 48KHz

• Music Max Length : 999.59 Sec.

Moves to upper level file

Preview: Display the

title/folder name of the

music in the selected folder

Current page/Total pages

Total number of marked

musics

Usable USB memory

Corresponding buttons on

the remote control

Select

UUSS BB

Select

MMuussiicc LLiisstt

ENTER

USB Device

MUSIC LIST

Up Folder

Free Space 150MB

00:00 / 04:16

Title Duration

Up Folder

Good Bye

Arirang 04:12

05:30

3 4

Move PopUp Menu Move Page Mark

MARK

Page 1/1

No Marked

DriveA

Arirang

Exit

USB

Music Selection and Popup Menu

■

Use the

CCHH

button to navigation in

the music page.

■

Use

MMAARRKK

button to mark or unmark a music

file. If no music is marked, all the music in the

folder will be played in sequence. When one or

more music files are marked, the marked music

files will be played in sequence. If you want to

listen to only one song repeatedly, just mark

that one file and play.

Up to 6 music titles are listed per page.

Select the target folder or drive.

Select the desired musics.

Show the Popup menu.

Select the desired Popup menu.

ENTER

RETURN

Return to TV viewing

USB Device

Page 1/1

No Marked

MUSIC LIST

Up Folder

Free Space 150MB

00:00 / 04:16

DriveA

Arirang

DurationTitle

Up Folder

Good Bye

Arirang

USB Device

Page 1/1

No Marked

MUSIC LIST

Up Folder

Free Space 150MB

00:00 / 04:16

DriveA

Arirang

Move

Move Page

Mark

MARK

PopUp Menu

DurationTitle

Up Folder

Good Bye

Arirang

05:30

04:12

3945 KB,128 Kbps

Play

Play with Photo

Mark All

Delete

PPllaayy

(During stop): Play the selected music.

Once a song finishes playing, the next selected

one will be played. When there are no selected

musics to play, the next one in the current fold-

er will be played. If you go to a different folder

and press the

EENNTTEERR

button, the current

music in playback will stop.

PPllaayy MMaarrkkeedd

: Play the selected musics. Once

a music finishes playing, the next selected one

will be played automatically.

SSttoopp PPllaayy

(During playback): Stop the play-

ing musics.

PPllaayy wwiitthh PPhhoottoo

: Start playing the selected

musics and then move to the Photo List.

MMaarrkk AAllll

: Mark all musics in the folder.

UUnnmmaarrkk AAllll

: Deselect all marked music.

DDeelleettee

: Delete the selected music.

CClloossee

: Close the pop-up menu.

Exit

Move

Move Page

Mark

MARK

PopUp Menu

Exit

USB

■

The play information box (as shown below) will automatically

move across the screen when there is no user input to pre-

vent a fixed image remaining on the screen for a extended

period of time.

NOTE

When music is playing, is displayed in front of the music play time.

A damaged or corrupted music file that does not play displays 00:00 as the play time.

Music files with copy-protection will not play.

Press

EENNTTEERR

, or

RREETTUURRNN

button to stop the screen saver.

This TV can not play music files less than 16 Kbytes.

USB

MOVIE LIST

- Only 50/60PS70, 50/60PS80 models

The movie list is activated once a USB drive is detected.

It is used when playing movie files on TV.

Displays the movies in the USB devices and supports play.

Allows playback of all movies in the folder and user desired files.

It is a movie list that displays folder information and DivX file.

Screen Components

Moves to upper level folder

Current page/Total pages

Total number of marked

movies

Available USB space

Corresponding buttons on

the remote control

Select

UUSS BB

Select

MMoovviiee LLiisstt

ENTER

USB Device

MOVIE LIST

Up Folder

Free Space 150MB

704 x 396 668 MB

Title Duration

Up Folder

Good Bye

Scent of a waman. (1992) 04:12

05:30

Move PopUp Menu Move Page Mark

MARK

Page 1/1

No Marked

Movie

Scent of a waman. (1992)

Exit

AVI

m4v

Divx

Video Codec

MPEG4

DivX 3.XX

DivX 4.XX

DivX 5.XX

DivX 6.XX

Xvid 1.00

Xvid 1.01

Xvid 1.02

Xvid 1.03

Xvid 1.10 Beta1/2

MPEG1

MPEG2

AC3

• Bit rate range 32Kbps ~ 640Kbps

• Sampling rate 32KHz, 44.1KHz, 48KHz

MPEG

• Bit rate range 32Kbps ~ 448Kbps

• Sampling rate 32KHz ~ 48KHz

LPCM

MP3

• Bit rate range 32Kbps ~ 320Kbps

• Sampling rate 32KHz ~ 48KHz

Microsoft MPEG4 is not

supported.

WMV series are not sup-

ported.

Playing a video only

support the Playback.

Audio Codec

Maximum

Resolution supported

Extension name

Supported Movie File

Frame

Explanation

DAT

MPG

MPEG

MPE

VOB

720X480

800X432

25P

30P

Subtitle format :

**..aassss// **..ssmmii// **..ssrrtt// **..ssssaa

USB

Movie Selection and Popup Menu

■

Use the

CCHH

button to navigate in the

movie page.

■

Use

MMAARRKK

button to mark or unmark a movie

file. When one or more movie files are marked,

the marked movie files will be played in

sequence.

Up to 6 movie titles are listed per page.

Select the target folder or drive.

Select the desired movies.

Show the Popup menu.

Select the desired Popup menu.

ENTER

PPllaayy

: Play the selected movie titles.

MMaarrkk AAllll

: Mark all movies in the folder.

UUnnmmaarrkk AAllll

: Deselect all marked movie.

DDeelleettee

: Delete the selected movie.

CClloossee

: Close the pop-up menu.

USB Device

Up Folder

Free Space 150MB

Move

Move Page

Mark

MARK

PopUp Menu

DurationTitle

Exit

Page 1/1

No Marked

MOVIE LIST

704 x 396 668 MB

Movie

Scent of a waman. (1992)

Up Folder

Lost

22:13:20

22:30:20

USB Device

Up Folder

Free Space 150MB

Move

Move Page

Mark

MARK

PopUp Menu

Duration

Title

Exit

Page 1/1

No Marked

MOVIE LIST

704 x 396 668 MB

Movie

Scent of a waman. (1992)

Up Folder

Lost

22:13:20

22:30:20

704 x 396 668 MB

Play

Mark All

Delete

USB

Select the target folder or drive.

Select the desired movies.

Show the Popup menu.

Select

PPllaayy

ENTER

Display the current movie status progress bar

in the bottom of the screen.

[Use of remote control]

Press the

RREEWW

((

FFFF

))

button to rewind.

Press the

FF FF

((

GGGG

))

button to forward fast.

Press the

PPaauussee

((

II II

))

button to pause the

screen.

Press the

SSttoopp

((

))

button to stop.

Display the DivX Banner in

the top of the screen.

320 x 250

USB

MPEG4 / AC3

Scent of a woman (1992).

MPEG4 / AC3 MPEG4 / AC3

Option

Playing the Movie

You can adjust various method during the movie play.

USB Device

Up Folder

Free Space 150MB

Move

Move Page

Mark

MARK

PopUp Menu

DurationTitle

Exit

Page 1/1

No Marked

MOVIE LIST

704 x 396 668 MB

Movie

Scent of a waman. (1992)

Up Folder

Lost

22:13:20

22:30:20

USB Device

Up Folder

Free Space 150MB

Move

Move Page

Mark

MARK

PopUp Menu

Duration

Title

Exit

Page 1/1

No Marked

MOVIE LIST

704 x 396 668 MB

Movie

Scent of a waman. (1992)

Up Folder

Lost

22:13:20

22:30:20

704 x 396 668 MB

Play

Mark All

Delete

INFO i

ENTER

USB

Select the desired item.

Select the desired movie option.

Display the

OOppttiioonn

menu.

RED

Option Menu Selection

During the movie play, the following options are available.

Precautions when playing the DivX

Specific subtitles created by the user may not be operated normally.

Some special characters are not supported in subtitles.

HTML tags are not supported in subtitles.

Subtitles in languages other than the supported languages are not available.

Damaged movie files may not be played, and certain functions could be limited during the playback.

Playback for movie file exceeding 4GB (Giga Byte) is not supported.

If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.

Video with resolution higher than maximum resolution supported for each frame, cannot be guaranteed for

smooth playback.

DTS Audio codec is not supported.

A DivX movie file and its subtitle file must be located in the same folder.

At this time, a movie file name and its subtitle file name must be identical for it to be displayed.

Playing a video via a USB connection that doesn’t support high speed may not work properly.

Return to movie viewing

PPiiccttuurree SSiizzee

: Select the Full screen or Original size.

AAuuddiioo LLaanngguuaaggee

: Select the language.

But, the file with only one audio can not be selected.

SSuubbttiittllee LLaanngguuaaggee

: The subtitle can be turned on or off.

If there are two or more subtitles, you can select one of them.

•

SSyynncc

: When the video is not synchronized with the caption,

it can be adjusted by the unit of 0.5 second.

•

PPoossiittiioonn

: Move the location of the subtitle.

Latin1 English, Spanish, French

Subtitle Language Group Supported Language

Picture Size

Subtitle Language

Audio Language

Subtitle

Language

Sync

Position

Full

---

USB

DIVX REGISTRATION CODE

- Only 50/60PS70, 50/60PS80 models

Confirm the DivX registration code number of the TV.

Using the registration number, movies can be rented or purchased at www.divx.com/vod.

Select

UUSS BB

Select

DDiivvXX RReegg

CCooddee

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

NOTE

With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.

(Only DivX files matched with the registration code of the purchased TV are playable.)

The video or audio of a file converted based on a standard other than the DivX codec standard may be

corrupted or unable to be played.

Enter

Move

USB

Photo List

Music List

Movie List

DivX Reg. Code

Deactivation

Enter

Move

USB

Photo List

Music List

Movie List

DivX Reg. Code

Deactivation

DivX(R) Video On Demand

Your registration code is : xxxxxxxxxx

To learn more visit www.divx.com/vod

Display

DDiivvXX RReegg.. CCooddee

USB

DEACTIVATION

- Only 50/60PS70, 50/60PS80 models

Select

UUSS BB

Select

YY eess

Select

DDeeaaccttiivvaattiioonn

ENTER

Return to TV viewing.

ENTER

Delete the existing authentication information to receive a new DivX user authentication for TV.

Once this function is executed, a DivX user authentication is required again to see DivX DRM files.

Enter

Move

USB

Photo List

Music List

Movie List

DivX Reg. Code

Deactivation

Enter

Move

USB

Photo List

Music List

Movie List

DivX Reg. Code

Deactivation

Yes No

DivX(R) Video On Demand

This device is deactivated.

Your deactivation code is : xxxxxxxxx

To learn more visit www.divx.com/vod

DivX(R) Video On Demand

Do you want to deactivate your device?

Select

CClloossee

ENTER

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

■

RGB-PC input source use 4:3 or 16:9 aspect ratio.

Zoom

Cinema Zoom

16:9

Just Scan

4:3

Q.Menu

16:9

Vivid

Standard

Off

English

Off

Add

Eject

Aspect Ratio

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

Eject USB

Select the

AAssppeecctt RRaattiioo

Select the desired picture format.

Q. MENU

Return to TV viewing.

Set By Program

* Only DTV/CADTV/Component/HDMI-

DTV/DVI-DTV (720p/1080i/1080p)

■

You can also press the

RRAATTIIOO

button repeated-

ly on the remote control.

PICTURE CONTROL

16 : 9

Adjust the picture horizontally, in a linear pro-

portion to fill the entire screen.

Just Scan

Normally the edges of video signals are cropped

1-2%. Just Scan turns off this cropping and

shows the complete video.

Notes: If there is noise on the edges of the original

signal, it will be visible when Just Scan is activated.

JJuusstt SSccaann

operates only in

DTV/CADTV/Component/HDMI-DTV/DVI-DTV

(720p/1080i/1080p) input source.

Set by program

Selects the proper picture proportion to match

the source’s image.

4:3

Choose 4:3 when you want to view a picture with

an original 4:3 aspect ratio.

Zoom

Choose Zoom when you want to view the picture

without any alteration. However, the top and bot-

tom portions of the picture will be cropped.

Cinema Zoom

Choose Cinema Zoom when you want to enlarge

the picture in correct proportion. Note: When

enlarging or reducing the picture, the image may

become distorted.

(4:3 4:3)

(16:9 16:9)

■

The adjustment range is 1-16.

PICTURE CONTROL

PICTURE WIZARD

- Only 50/60PS60, 50/60PS60C models

Adjust

PPiiccttuurree WWiizzaarrdd

Adjust

WWhhiittee LLeevveell

ENTER

Adjust

BBllaacckk LLeevveell

ENTER

Adjust

CCoolloorr

ENTER

Adjust

TTiinntt

ENTER

Picture Wizard

With Picture Wizard, you can adjust the picture

quality of the original image.

Black Level

Set the screen above identical to the Recommended

sample below.

NextPrevious

• Brightness 50

Low HighRecommended

Color

Set the screen above identical to the Recommended

sample below.

NextPrevious

• Color 50

Low HighRecommended

White Level

Set the screen above identical to the Recommended

sample below.

NextPrevious

Low HighRecommended

• Contrast 90

Tint

Set the screen above identical to the Recommended

sample below.

NextPrevious

Low HighRecommended

• Tint 0

This feature lets you adjust the picture quality of the original image.

Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen

quality by easily following each step.

When you adjust the image to

LL oo ww

RReeccoommmmeennddeedd

HHiigghh

, you can see the example of the changes you

made.

Select

PPiiccttuurree WWiizzaarrdd

ENTER

Select

PPIICCTTUURREE

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Wizard

Energy Saving : Off

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

ENTER

PICTURE CONTROL

Adjust

HHoorriizzoonnttaall

SShhaarrppnneessss

ENTER

Select input source to apply the

settings.

FAV

MARK

Adjust

VVeerrttiiccaall

SShhaarrppnneessss

ENTER

Finish the Picture Wizard.

ENTER

Save.

ENTER

Complete

ConfirmMovePrevious

Horizontal Sharpness

Set the screen above identical to the Recommended

sample below.

NextPrevious

• H Sharpness 50

Low HighRecommended

Vertical Sharpness

Set the screen above identical to the Recommended

sample below.

NextPrevious

• V Sharpness 50

Low HighRecommended

DTV

AV1

AV2

Component1

Component2

RGB

HDMI1

HDMI2

HDMI3

HDMI4

Select (an) input(s) to apply the settings.

Warning: The picture quality may vary according to

the different types of signal and inputs.

Mark

MARK

■

If you stop the setting before the final

step, the changes will not be saved to

the TV.

The current adjustment value is saved to Expert1.

PICTURE CONTROL

ENERGY SAVING

Select

PPIICCTTUURREE

Select

IInntteelllliiggeenntt SSeennssoorr

( Select

LLooww

MMiiddddllee

, or

HHiigghh

.),

OOffff

MMiinniimmuumm

MMeeddiiuumm

MMaaxxiimmuumm

ENTER

Select

EEnneerrggyy SSaavviinngg

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

Aspect Ratio : 16:9

Energy Saving : Intelligent Sensor

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

Enter

Move

PICTURE

Aspect Ratio : 16:9

Energy Saving : Intelligent Sensor

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

It reduces the TV’s power consumption.

The default factory setting complies with the

EEnneerrggyy SSttaarr

requirements and is adjusted to the comfort-

able level to be viewed at home.

You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the

PPiiccttuurree MMooddee

This feature is disabled in “

PPiiccttuurree MMooddee--CCiinneemmaa

”.

Intelligent Sensor

Off

Minimum

Medium

Maximum

High

■

You can also adjust the

EENNEERRGGYY SSAAVVIINNGG

bot-

ton on the remote control.

■

IInntteelllliiggeenntt SSeennssoorr??

This function automatically adjusts the brightness of

screen to the most suitable picture according to the

surrounding conditions.

PICTURE CONTROL

PRESET PICTURE SETTINGS (PICTURE MODE)

There are factory presets for picture settings available in the user menus. You can use a preset, change each

setting manually.

■

VViivviidd

SSttaannddaarrdd

CCiinneemmaa((oorr CCiinneemmaa))

SSppoorrtt

, and

GGaammee

Settings are preset for the

optimum picture quality at the factory.

■

You can also adjust

PPiiccttuurree MMooddee

in the

PP IICC--

TTUURREE

menu.

■

VViivviidd

: This is the mode to maximize the effect

of the video in the retail store. Strengthen the

contrast, brightness, color and sharpness for

vivid picture.

■

SSttaannddaarrdd

: This is the mode to realize optimum

viewing condition for the general user.

■

CCiinneemmaa

: This mode optimizes video for watch-

ing movies.

■

SSppoorrtt

: This is the video mode to emphasize

dynamic video and primary color (Ex, white, uni-

form, grass, sky blue etc.) by realizing the opti-

mal screen for sports.

■

GGaammee

: This is the mode to realize fast response

speed in a fast gaming screen.

■

EExxppeerrtt

: This is the mode to adjust the video in

detail for video quality expert and general user.

■

Cinema(Only 42/50PQ60, 50/60PS60,

50/60PS60C, 50/60PS70, 50/60PS80)

: This is cinema

quality mode to provide you the experience of

watching a movie at home. The user will be able

enjoy the best level of satisfactory screen quali-

ty in any movie without any separate adjust-

ments. Cinema expresses the optimal

screen quality when it is darkest.

■

When selecting

CC iinnee mm aa

, Aspect ratio

changes to Just scan.

Q. MENU

Select

PPiiccttuurree MMooddee

Vivid Standard

Expert1

Expert2

Game Sport

Cinema

Select

VViivviidd

SSttaannddaarrdd

CCiinneemmaa

((oorr CCiinneemmaa))

SSppoorrtt

GGaammee

EExxppeerrtt11

EExxppeerrtt22

Q. MENU

Return to TV viewing.

Cinema

■

(Thomlinson Holman’s Experiment) is the

audio and video certification standard of THX

established by George Lucas and Thomlinson.

This is the product to be certified in THX display

area and guarantees screen quality that exceeds the

display standard specification in both hardware and

software.

Q.Menu

16:9

Vivid

Standard

Off

English

Off

Add

Eject

Aspect Ratio

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

Eject USB

Vivid

16:9

PICTURE CONTROL

MANUAL PICTURE ADJUSTMENT-USER MODE

Adjust the picture appearance to suit your preference and viewing situations.

Only 42/50PQ60, 50/60PS60, 50/60PS60C, 50/60PS70, 50/60PS80 :

This feature is disabled in “

PP iicc tt uu rr ee MMoo dd ee-- CC ii nneemm aa

”.

Select

PPIICCTTUURREE

Make appropriate adjustments.

Select

CCoonnttrraasstt

BBrriigghhttnneessss

SShhaarrppnneessss

CCoolloorr

, or

TTiinntt

Select

PPiiccttuurree MMooddee

ENTER

Select

VViivviidd

SSttaannddaarrdd

CCiinneemmaa((oorr CCiinneemmaa))

SSppoorrtt

, or

GGaammee

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

Aspect Ratio : 16:9

Energy Saving : Intelligent Sensor

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Contrast 80

Enter

■

CCoonnttrraasstt

: Increase or decrease the gradient

of the video signal. You may use Contrast when

the bright part of picture is saturated.

■

BBrriigghhttnneessss

: Adjusts the base level of the signal

in the picture. You may use brightness when the

dark part of the picture is saturated.

■

SShhaarrppnneessss

: Adjusts the level of crispness in the

edges between the light and dark areas of the

picture. The lower the level, the softer the

image.

■

CCoolloorr

: Adjusts intensity of all colors.

■

TTiinntt

: Adjusts the balance between red and

green levels.

PICTURE CONTROL

PICTURE IMPROVEMENT TECHNOLOGY

You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.

You can set the video seeing differently for each input.

To reset to the factory default screen after making adjustments to each video mode, execute the “Reset” func-

tion for each Picture Mode.

Select

PPIICCTTUURREE

Select

AAddvvaanncceedd CCoonnttrrooll

Select your desired options.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Make appropriate adjustments.

Enter

Move

PICTURE

Enter

Move

PICTURE

Aspect Ratio : 16:9

Energy Saving : Intelligent Sensor

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

Aspect Ratio : 16:9

Energy Saving : Intelligent Sensor

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

Color Temperature

Dynamic Contrast

Dynamic Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Film Mode

Off

Medium

Off

Color Gamut

Wide

Edge Enhancer

PICTURE CONTROL

Select your desired menu option.

Select

PPIICCTTUURREE

Select

PPiiccttuurree MMooddee

Select

EExxppeerrtt CCoonnttrrooll

Select

EExxppeerrtt11

, or

EExxppeerrtt22

ENTER

Make appropriate adjustments.

EXPERT PICTURE CONTROL

By segmenting categories,

EExxppeerrtt11

and

EExxppeerrtt22

provide more categories which users can set as

they see fit, offering the optimal picture quality for users.

This may also be used be a professional to help optimize the TV performance in the environment the TV is in.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

Aspect Ratio : 16:9

Energy Saving : Intelligent Sensor

Picture Mode : Expert1

• Contrast 80

• Brightness 50

• H Sharpness 50

• V Sharpness 50

• Color 50

• Tint 0

Enter

Move

PICTURE

Energy Saving : Intelligent Sensor

Picture Mode : Expert2

• Contrast 50

• Brightness 50

• H Sharpness50

• V Sharpness50

• Color 50

• Tint 0

• Expert Control

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

Off

Dynamic Contrast

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Off

Film Mode

Color Standard

Color Gamut

Standard

Edge Enhancer

Off

PICTURE CONTROL

Color Temperature

■

Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish.

■

Adjusts the contrast to keep it at the best level according to the brightness of the

screen. The picture is improved by making bright parts brighter and dark parts darker.

■

Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances

hue, saturation and luminance so that red, blue, green and white look more vivid.

■

Reduces screen noise without compromising video quality.

Low : Make dark and middle gray level area of the picture brighter.

Medium: Express original picture levels.

High: Make dark and middle gray level area of the picture darker.

■

You can adjust brightness of dark area and middle gray level area of the picture.

Low: The reflection of the screen gets darker.

High: The reflection of the screen gets brighter.

Auto: Realizing the black level of the screen and set it to High or Low automatically.

■

Set black level of the screen to proper level.

■

This function enables to select 'Low' or 'High' in the following mode: AV (NTSC-M),

HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.

■

Makes video clips recorded in film look more natural by eliminating judder effect.

■

DVD and Blu-ray movies are filmed at 24 frames per second.

Dynamic Contrast

Dynamic Color

Noise Reduction

Gamma

Black Level

Film Mode

Standard: Displays standard color area.

Wide: Mode to use and set the rich color area of the display.

■

Maximize the utilization of color to increase color quality.

■

In Advanced Control mode, this feature is enabled in “

CCoolloorr TTeemmppeerraattuurree -- WWaarrmm

”.

■

Show clearer and distinctive yet natural corners of the video.

■

Convert the color of a different video to HD color.

■

This is the function to adjust the overall color of the screen to the feeling you want.

a. Method : 2 Points

- Pattern: Inner, Outer

- Red/Green/Blue Contrast, Red/Green/Blue Brightness:

The adjustment range is -50 - +50.

b. Method : 20 Point IRE

- Pattern: Inner, Outer

- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be

set among 5, 10, 15 - 95, 100. You can adjust Red, Green or Blue according to each setting.

- Red/Green/Blue: The adjustment range is -50 - +50.

■

As the tool used by the experts to make adjustments by using the test patterns,

this does not affect other colors but can be used to selectively adjust the 6 color

areas (Red/Green/Blue/Cyan/Mgt/Yellow).

Color difference may not be distinctive even when you make the adjustments for

the general video.

Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.

- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -30 -

+30.

- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.

- This feature is disable in RGB-PC and HDMI (PC) mode.

Color Standard

White Balance

Color Management

System

Edge Enhancer

Color Gamut

PICTURE CONTROL

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.

Select

PPIICCTTUURREE

Select

RReesseett

Initialize the adjusted value.

ENTER

Return to TV viewing.

Enter

Move

PICTURE

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

Enter

Move

PICTURE

Picture Mode : Standard

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

Resetting video configuration...

PICTURE CONTROL

IMAGE STICKING MINIMIZATION (ISM) METHOD

A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use

Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.

An excessive ghosted image may be impossible to

clear entirely with White Wash. To return to nor-

mal viewing, press the any button.

NOTE

■

NNoorrmmaall

: If image sticking is never a

problem, ISM is not necessary - set to

Normal.

■

OOrrbbiitteerr

: Orbiter may help prevent

ghost images. However, it is best not to

allow any fixed image to remain on the

screen. To avoid a ghost image on the

screen, the image will move every 2 min-

utes.

■

CCoolloorr WWaasshh

: The color block with the

screen moved a little and the white pat-

tern are alternately displayed. It is diffi-

cult to see the after image on all colors.

Once it has been corrected it will not be

visible in any color.

■

WWhhiittee WWaasshh

: White Wash removes

ghost images from the screen. Use spar-

ingly. Watch the TV normally for a while

before using this feature to see if the

ghost image disappears on its own.

Select

OOPPTTIIOONN

Select

IISSMM MMeetthhoodd

ENTER

Select

NNoorrmmaall,, OOrrbbiitteerr,,

CCoolloorr WWaasshh

WWhhiittee WWaasshh..

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Normal

Orbiter

Color Wash

White Wash

PICTURE CONTROL

DEMO MODE

Displays a slide show to explain the various features of this TV.

This feature is disabled in “

IInniittiiaall SSeettttiinngg--HHoommee UUssee

”.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Off

Select

OOPPTTIIOONN

Select

DDeemmoo MMooddee

ENTER

Select

OO nn

(Only 50/60PS70, 50/60PS80:

Select

LLEEDD OOffff

LLEEDD OOnn

ENTER

Return to TV viewing.

After a while,

DDeemmoo MMooddee

starts.

If you want to stop the demo, press any button.

(except VOL or MUTE)

Show the various features of the TV.

Show the difference XD Engine features.

Off

On (LED Off)

On (LED On)

(Only 50/60PS70,

50/60PS80 models )

(Only 50/60PS70, 50/60PS80 )

■

LLEEDD OOffff

: Turn off the LED on the TV

front.

■

LLEEDD OOnn

: Turn on the LED on the TV

front.

SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER (AUTO VOLUME)

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a

regular TV program.

Because each broadcasting station has its own signal conditions, volume adjustment may be needed every

time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic

adjustments for each program.

Select

AAUUDDIIOO

Select

AAuuttoo VVoolluummee

Select

OO nn

OOffff

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

AUDIO

Auto Volume : On

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

E E

Off

SOUND & LANGUAGE CONTROL

CLEAR VOICE II

By differentiating the human sound range from others, it improves the sound quality of voices.

■

If you select “

CClleeaarr VVooiiccee IIII--OOnn

”,

SSRRSS TTrruuSSuurrrroouunndd XXTT

feature will not

work.

Select

AAUUDDIIOO

Select

CClleeaarr VVooiiccee IIII

Select

OO nn

OOffff

ENTER

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

E E

Adjustment for Clear Voice II Level

With selecting On

Select

LLeevveell

Make appropriate adjustments.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Level 0

Off

ENTER

SOUND & LANGUAGE CONTROL

PRESET SOUND SETTINGS (SOUND MODE)

Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate

sound options based on the program content.

SSttaannddaarrdd

MMuussiicc

CCiinneemmaa

SSppoorrtt

, and

GGaammee

are preset for optimum sound quality at the factory and are

not adjustable.

Standard Music

Game Sport

Cinema

Q. MENU

Select

SSoouunndd MMooddee

Select

SSttaannddaarrdd

MMuussiicc

CCiinneemmaa

SSppoorrtt

, or

GGaammee

Q. MENU

Return to TV viewing.

Q.Menu

16:9

Vivid

Off

English

Off

Add

Eject

Aspect Ratio

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

Eject USB

Standard

16:9

■

You can also adjust

SSoouunndd MMooddee

the

AAUUDDIIOO

menu.

■

SSttaannddaarrdd

: Offers standard-quality

sound.

■

MMuussiicc

: Optimizes sound for listening

to music.

■

CCiinneemmaa

: Optimizes sound for watching

movies.

■

SSppoorrtt

: Optimizes sound for watching sports

events.

■

GGaammee

: Optimizes sound for playing

games.

SOUND & LANGUAGE CONTROL

SOUND SETTING ADJUSTMENT - USER MODE

SRS TRUSURROUND XT

Select this option to sound realistic.

Adjust the sound to suit your taste and room situations.

Select

AAUUDDIIOO

Select

SSoouunndd MMooddee

Select

TTrreebbllee

BBaassss

ENTER

Select

SSttaannddaarrdd

MMuussiicc

CCiinneemmaa

SSppoorrtt

, or

GGaammee

ENTER

Make appropriate adjustments.

ENTER

Select

AAUUDDIIOO

Select

SSRRSS TTrruuSSuurrrroouunndd XXTT

Select

OO nn

OOffff

ENTER

■

If you select “

CClleeaarr VVooiiccee IIII--OOnn

”,

SS RRSS

TTrruuSSuurrrroouunndd XXTT

feature will not work.

■

SSRRSS TTrruuSSuurrrroouunndd XXTT

: TruSurround XT is a

patented SRS technology that solves the prob-

lem of playing 5.1 multichannel content over

two speakers.

RETURN

Return to the previous menu.

Return to TV viewing.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Treble 50

Bass 50

SRS TruSurround XT

Off

E E

SOUND & LANGUAGE CONTROL

BALANCE

Select

AAUUDDIIOO

Select

BBaallaannccee

Make appropriate adjustments.

ENTER

Adjust the left/right sound of speaker to suit your taste and room situations.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

E E

Balance 0

SOUND & LANGUAGE CONTROL

TV SPEAKERS ON/OFF SETUP

Turn the TV speakers off if using external audio equipment.

If you wish to use an external Hi-Fi system or a SRS system, turn off the TV’s internal speakers.

Select

AAUUDDIIOO

Select

TTVV SSppeeaakkeerr

Select

OO nn

OOffff

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

AUDIO

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Enter

Move

AUDIO

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Off

SOUND & LANGUAGE CONTROL

AUDIO RESET

Settings of the selected Sound Mode return to the default factory settings.

Select

AAUUDDIIOO

Select

RReesseett

ENTER

Initialize the adjusted value.

ENTER

Return to TV viewing.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 0

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

E E

Resetting audio configuration...

SOUND & LANGUAGE CONTROL

STEREO/SAP BROADCAST SETUP

For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom-

panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used

if the broadcast is only in Mono.

Select

SS AAPP

Select

MMoonnoo

SStteerreeoo

, or

SS AA PP

Return to TV viewing.

Q. MENU

Select

MMuullttii AAuuddiioo

Select other languages.

Return to TV viewing.

Q. MENU

Analog TV Digital TV

English

Q.Menu

16:9

Vivid

Off

Add

Eject

Aspect Ratio

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

Eject USB

16:9

Standard

English

SOUND & LANGUAGE CONTROL

AUDIO LANGUAGE

Other languages may be available if a digital signal is provided by the broadcasting station.

This feature operates only in DTV/CADTV mode.

Select

OOPPTTIIOONN

Select

AAuuddiioo LLaanngguuaaggee

Select your desired language.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

E E

English

Spanish

French

SOUND & LANGUAGE CONTROL

ON-SCREEN MENUS LANGUAGE SELECTION

The menus can be shown on the screen in the selected language.

Select

OOPPTTIIOONN

Select

MMeennuu LLaanngguuaaggee((LLaanngguuaaggee))

Select your desired language.

From this point on, the on-screen menus will

be shown in the selected language.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

E E

English

Español

Français

SOUND & LANGUAGE CONTROL

CAPTION MODE

Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying cap-

tioning information if provided on a program. Analog caption displays information at any position on the screen

and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both

digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode

which was last set when you turned the power off. This function is only available when

CCaappttiioonn

Mode is set

OO nn

Select

OOPPTTIIOONN

Select

CCaappttiioonn

Select

OO nn

ENTER

Select

CCCC11

TTeexxtt11

Analog Broadcasting System Captions

■

When selecting

OOffff

, Sub-menus for

Analog, DTV, and Digital Option

become disabled.

■

CCAAPPTTIIOONN

The term for the words that scroll

across the bottom of the TV screen;

usually the audio portion of the pro-

gram provided for the hearing impaired.

■

TTEEXXTT

The term for the words that appear in a

large black frame and almost cover the

entire screen; usually messages provid-

ed by the broadcaster.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Mode

CC1

Digital Option

E E

SOUND & LANGUAGE CONTROL

Digital Broadcasting System Captions

Choose the language you want the DTV/CADTV Captions to appear in.

Other Languages can be chosen for digital sources only if they are included on the program.

This function in only available when Caption Mode is set On.

Select

OOPPTTIIOONN

Select

CCaappttiioonn

Select

OO nn

ENTER

Select

CCCC11

TTeexxtt11

, or

SSeerrvviiccee11

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Mode

Service 1

Digital Option

E E

SOUND & LANGUAGE CONTROL

Caption Option

Customize the DTV/CADTV captions that appear on your screen.

This function in only available when Caption Mode is turned On.

Select

OOPPTTIIOONN

Select

CCaappttiioonn

Select

OO nn

ENTER

Select

CCuussttoomm

ENTER

Customize the

SSttyyllee

FFoonntt

, etc., to your

preference. A preview icon is provided at

the bottom of the screen, use it to see the

caption language.

Select

DDiiggiittaall OOppttiioonn

■

SSiizzee

: Set the word size.

■

FFoonntt

: Select a typeface for the text.

■

TTeexxtt CCoolloorr

: Choose a color for the

text.

■

TTeexxtt OOppaacciittyy

: Specify the opacity

for the text color.

■

BBgg ((BBaacckkggrroouunndd)) CCoolloorr

: Select a

background color.

■

BBgg ((BBaacckkggrroouunndd)) OOppaacciittyy

: Select

the opacity for the background color.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Size

A Standard

Font

Font 1

Text Color

White

Text Opacity

Solid

Bg Color

Black

Bg Opacity

Solid

Custom

E E

Mode

Service1

Digital Option

TIME SETTING

CLOCK SETTING

TIME SETTING

Auto Clock Setup

The time is set automatically from a digital channel signal.

The digital channel signal includes information for the current time provided by the broadcasting station.

Set the clock manually if the current time is set incorrectly by the auto clock function.

Select

TTIIMMEE

Select

CClloocckk

Select

AAuuttoo

ENTER

Select your viewing area time zone.

• U.S.A:

EEaa ss tt ee rr nn

CCeennttrraa ll

MMoouunn tt aaii nn

PPaacciiffiicc

AAllaasskkaa

, or

HHaawwaaiiii

• Canada:

EEaasstteerrnn

CCeennttrraall

MMoouunnttaaiinn

PPaacciiffiicc

NNeeww FF..l

laanndd

, or

AAttllaannttiicc

Select

AAuuttoo

OO nn

, or

OOffff

(depending on

whether or not your viewing area observes

Daylight Saving time).

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Year

Month

Date

Hour

2 AM

2008

Minute

Time Zone

Eastern

Daylight

Saving

Auto

TIME SETTING

Manual Clock Setup

If the current time setting is wrong, set the clock manually.

Select

TTIIMMEE

Select

CClloocckk

Select

MMaannuuaall

ENTER

Select the Year, Month, Date, Hour, or Minutes

option.

Set the Year, Month, Date, Hour, or Minutes

option.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Year

Month

Date

Hour

2 AM

2008

Minute

Time Zone

Eastern

Daylight

Saving

Auto

Manual

If you unplug the TV once or turn the

main power off, the clock function

reset.

TIME SETTING

AUTO ON/OFF TIME SETTING

This function operates only if the current time has been set.

The

OOffff TTiimmee

function overrides the

OOnn TTiimmee

function if they are both set to the same time.

The TV must be in standby mode for the

OOnn TTiimmee

to work.

If you do not press any button within 2 hours after the TV turns on with the

OOnn TTiimmee

function, the TV will

automatically revert to standby mode.

■

To cancel

OOnn//OOffff TTiimmee

function, select

OOffff

■

Only for On Time function

Select

IInnppuutt

Select the desired input source.

Select

TTIIMMEE

Select

OOffff ttiimmee

OOnn ttiimmee

Select

RReeppeeaatt

ENTER

Select

OOffff

OOnnccee

DDaaiillyy

MMoonn..

FFrrii..

MMoonn..

SSaatt..

WWeeeekkeenndd

, or

SSuunnddaayy

Select and set

HHoouurr

MMiinnuuttee

ENTER

When Selecting

TT VV

set the channel at turn-on.

Adjust to sound level at

turn-on.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Repeat

Once

Hour

6 AM

Minute

Input

Channel

TV 2-0

Volume

May /27 / 2009 /10:10 AM

TIME SETTING

SLEEP TIMER SETTING

The Sleep Time turns the TV off at the preset time.

Note that this setting is cleared when the TV is turned off.

■

You can also adjust

SSlleeeepp TTiimmeerr

the

TTIIMMEE

menu.

Q.Menu

16:9

Vivid

Off

English

Off

Add

Eject

Aspect Ratio

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

Eject USB

16:9

Off

Standard

Select

SSlleeeepp TTiimmeerr

Q. MENU

Select

OOffff

11 00

22 00

33 00

66 00

99 00

112200

118800

, or

224400

minutes.

Q. MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

PARENTAL CONTROL / RATINGS

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad-

casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the

type of the program and the categories. It is also possible to block all program viewing for a time period. To use

this function, the following must be done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be

blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-

video movies use the Movie Rating System

(

MPAA

)

only.

Ratings for Television programs including made-for-TV movies :

■

TV-G

(

General audience

)

■

TV-PG

(

Parental guidance suggested

)

■

TV-14

(

Parents strongly cautioned

)

■

TV-MA

(

Mature audience only

)

■

TV-Y

(

All children

)

■

TV-Y7

(

Children 7 years older

)

Set up blocking schemes to block specific channels, ratings, and external viewing sources.

A password is required to gain access to this menu.

Setting up Your Password

For USA For Canada

Enter Password

* * * *

Select

LLOOCCKK

ENTER

Input the password.

456

■

Enter the password as requested.

■

The TV is set up with the initial password

“0-0-0-0”.

SET PASSWORD & LOCK SYSTEM

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

PARENTAL CONTROL / RATING

Enables or disables the blocking scheme you set up previously.

Lock System

Select

LLoocckk SSyysstteemm

Select

OO nn

OOffff

ENTER

■

When you select

OO nn

, the Lock System

is enable.

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : On

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Off

PARENTAL CONTROL / RATING

PARENTAL CONTROL / RATINGS

Change the password by inputting a new password twice.

Set Password

Select

SSeett ppaasssswwoorrdd

Choose any 4 digits for your new password.

As soon as the 4 digits are entered, re-enter

the same 4 digits on the

CCoonnffiirrmm

ENTER

456

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

New

* * * *

Confirm

* * * *

PARENTAL CONTROL / RATING

CHANNEL BLOCKING

Select

BBlloocckk CChhaannnneell

Select a channel to block or unblock.

ENTER

Block or unblock a channel.

Blocks any channels that you do not want to watch or that you do not want your children to watch.

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Ch.Change

Move Page

Move

Block/Unblock

PARENTAL CONTROL / RATING

PARENTAL CONTROL / RATINGS

MOVIE & TV RATING

Movie Rating (MPAA)

For USA only

Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can

set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that

the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.

Select

MMoovviiee RRaattiinngg

Select

PP GG

PPGG--1133

NNCC--1177

, or

BBlloocckkiinngg OOffff

ENTER

■

G (General audience)

■

PG (Parental guidance suggested)

■

PG-13 (Parents strongly cautioned)

■

R (Restricted)

■

NC-17 (No one 17 and under admitted)

■

X (Adult only)

■

Blocking Off (Permits all programs)

If you set PG-13: G and PG movies will

be available, PG-13, R, NC-17 and X will

be blocked.

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

PG-13

NC-17

Blocking Off

Blocking off : Permits all

programs

PARENTAL CONTROL / RATING

Select

TTVV RRaattiinngg--CChhiillddrreenn

Select

AAggee

FFaannttaassyy VViioolleennccee

ENTER

Select block options.

ENTER

■

Age (applies to TV-Y, TV-Y7)

■

Fantasy Violence (applies to TV-Y7)

TV Rating Children

For USA only

Prevents children from watching certain children's TV programs, according to the ratings limit set. The children

rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi-

ences in the TV Rating - sub menu, your children can view those programs.

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Age

Fantasy Violence

PARENTAL CONTROL / RATING

100

PARENTAL CONTROL / RATINGS

TV Rating General

For USA only

Based on the ratings, blocks certain TV programs that you and your family do not want to view.

Select

TTVV RRaattiinngg--GGeenneerraall

Select

AAggee

DDiiaalloogguuee

LLaanngguuaaggee

SSeexx

VViioolleennccee

ENTER

Select block options.

ENTER

■

Age (applies to TV-G,TV-PG,TV-14,TV-

MA).

■

Dialogue-sexual dialogue (applies to

TV-PG,TV-14).

■

Language-adult language (applies to

TV-PG, TV-14, TV-MA).

■

Sex-sexual situations (applies to TV-PG,

TV-14, TV-MA).

■

Violence (applies to TV-PG, TV-14, TV-

MA).

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Age

Dialogue

Language

Sex

Violence

PARENTAL CONTROL / RATING

101

TV Rating English

For CANADA only

Selecting English rating system.

Select

TTVV RRaattiinngg--EEnngglliisshh

Select

CC88++

PP GG

1144++

1188++

, or

BBlloocckkiinngg OOffff

ENTER

■

E (Exempt)

■

C (Children)

■

C8+ (Children eight years and older)

■

G (General programming, suitable for

all audiences)

■

PG (Parental Guidance)

■

14+ (Viewers 14 years and older)

■

18+ (Adult programming)

■

Blocking Off (Permits all programs)

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Blocking off : Permits all

programs

C8+

14+

18+

Blocking Off

PARENTAL CONTROL / RATING

102

PARENTAL CONTROL / RATINGS

TV Rating French

For CANADA only

Selecting Canadian French rating system.

Select

TTVV RRaattiinngg--FFrreenncchh

Select

88aannss++

1133aannss++

1166aannss++

1188aannss++

, or

BBlloocckkiinngg ooffff

ENTER

■

E (Exempt)

■

G (General)

■

8ans+ (General-Not convenient for lit-

tle children)

■

13ans+ (Not convenient for children of

13 years and younger)

■

16ans+ (Not convenient for children of

16 years and younger)

■

18ans+ (This programs is only for

adults)

■

Blocking off (Permits all programs)

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Blocking off : Permits all

programs

8ans+

13ans+

16ans+

18ans+

Blocking Off

PARENTAL CONTROL / RATING

103

DOWNLOADABLE RATING

■

Based on rating table, your TV's OSD

(On Screen Display) may differ slightly

from what is shown in this manual.

This function is available only for digital channels.

This function operates only when TV has received Region5 Rating data.

Select

DDoowwnnllooaaddaabbllee RRaattiinngg

Select desired

DDoowwnnllooaaddaabbllee

RRaattiinngg

option.

ENTER

Select desired option and block it.

ENTER

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Humor

Sport

Cruelty

Language

Sadness

Genre

Age

PARENTAL CONTROL / RATING

104

PARENTAL CONTROL / RATINGS

EXTERNAL INPUT BLOCKING

Enables you to block an input.

Select

IInnppuutt BBlloocckk

Select input source.

Select

OO nn

OOffff

ENTER

Select

LLOOCCKK

ENTER

Input the password.

456

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

AV1

Off

AV2

Off

Component1

Off

HDMI1

Off

RGB-PC

Off

Component2

Off

HDMI2

Off

HDMI3

Off

Only 42/50PQ60,

50/60PS60,

50/60PS60C,

50/60PS70,

50/60PS80

HDMI4

Off

PARENTAL CONTROL / RATING

105

KEY LOCK

The TV can be set up so that it can only be used with the remote control.

This feature can be used to prevent unauthorized viewing by locking out the front panel controls.

This TV is programmed to remember which option it was last set to even if you turn the TV off.

Select

OOPPTTIIOONN

Select

KKeeyy LLoocckk

ENTER

Select

OO nn

OOffff

ENTER

■

KKeeyy LLoocckk

‘

OO nn

’, if the TV is turned

off, press the INPUT, CH

button

on the TV or POWER, INPUT, CH ,

or NUMBER buttons on the remote con-

trol.

■

With the

KKeeyy LLoocckk OOnn

, the display

‘

KKeeyy LLoocckk

’ appears on the screen if

any button(Except (power) button)

on the front panel is pressed while view-

ing the TV.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Off

APPENDIX

106

APPENDIX

TROUBLESHOOTING

TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy..

TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk..

No picture &No sound

No or poor color

or poor picture

Poor reception on

some channels

Lines or streaks

in pictures

No picture

when connecting HDMI

Horizontal/vertical bars

or picture shaking

Picture appears slowly

after switching on

The remote control

doesn’t work

Power is suddenly

turned off

■

Check to see if there is any object between the product and the remote control

causing obstruction. Ensure you are pointing the remote control directly at the TV.

■

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

■

Ensure that the correct remote operating mode is set: TV, VCR etc.

■

Install new batteries.

■

Is the sleep timer set?

■

Check the power control settings. Power interrupted.

■

TV will be automatically turned off, in case of no signal for 15 minutes.

■

Check whether the product is turned on.

■

Try another channel. The problem may be with the broadcast.

■

Is the power cord inserted into wall power outlet?

■

Check your antenna direction and/or location.

■

Test the wall power outlet, plug another product’s power cord into the outlet

where the product’s power cord was plugged in.

■

This is normal, the image is muted during the product startup process. Please

contact your service center, if the picture has not appeared after five minutes.

■

Adjust Color in menu option.

■

Keep a sufficient distance between the product and the VCR.

■

Try another channel. The problem may be with the broadcast.

■

Are the video cables installed properly?

■

Activate any function to restore the brightness of the picture.

■

Check for local interference such as an electrical appliance or power tool.

■

Station or cable product experiencing problems, tune to another station.

■

Station signal is weak, reorient antenna to receive weaker station.

■

Check for sources of possible interference.

■

Check antenna (Change the direction of the antenna).

■

Check HDMI cable over version 1.3.

The HDMI cables don’t support HDMI version 1.3, it cause flickers or no screen

display. In this case use the latest cables that support HDMI version 1.3.

*This feature is not available for all models.

APPENDIX

107

TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd))

■

Adjust resolution, horizontal frequency, or vertical frequency.

■

Check the input source.

■

Work the Auto configure or adjust clock, phase, or H/V position. (Option)

■

Check the signal cable.

■

Reinstall the PC video card.

The signal is out of range

Screen color is unstable

or single color

Vertical bar or stripe on

background &

Horizontal Noise &

Incorrect position

Picture OK & No sound

Unusual sound from

inside the product

No sound

when connecting

HDMI/USB

No output from one

of the speakers

TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk..

■

Press the VOL or VOLUME button.

■

Sound muted? Press MUTE button.

■

Try another channel. The problem may be with the broadcast.

■

Are the audio cables installed properly?

■

Adjust Balance in menu option.

■

A change in ambient humidity or temperature may result in an unusual noise

when the product is turned on or off and does not indicate a fault with the

product.

■

Check HDMI cable over version 1.3.

■

Check USB cable over version 2.0.

■

Use normal MP3 file.

*This feature is not available for all models.

APPENDIX

108

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can

enjoy your new TV.

Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm

water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then

use it to wipe the screen.

Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

■

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.

■

Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug

the power cord to protect against possible damage from lightning or power surges.

CAUTION

APPENDIX

109

■

The specifications shown above may be changed without prior notice for quality improvement.

AC100-240V ~ 50/60Hz

NTSC-M, ATSC, 64 & 256 QAM

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

75 ohm

32 ~ 104°F (0 ~ 40°C)

Less than 80%

-4 ~ 140°F (-20 ~ 60°C)

Less than 85%

Dimensions

(Width x Height

x Depth)

Weight

Power requirement

Television System

Program Coverage

External Antenna Impedance

Environment

condition

With stand

Without stand

With stand

Without stand

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

MODELS

40.5 x 28.3 x 12.1 inches

1031.2 x 720.9 x 308.0 mm

40.5 x 25.8 x 3.1 inches

1031.2 x 656.7 x 80.8 mm

54.6 lbs / 24.8 kg

50.0 lbs / 22.7 kg

47.9 x 32.2 x 13.8 inches

1216.7 x 818.1 x 353.0 mm

47.9 x 29.8 x 3.2 inches

1216.7 x 759.0 x 83.0 mm

74.2 lbs / 33.7 kg

68.7 lbs / 31.2 kg

Dimensions

(Width x Height

x Depth)

Weight

With stand

Without stand

With stand

Without stand

48.3 x 32.4 x 13.8 inches

1228.8 x 824.6 x 353.0 mm

48.3 x 30.3 x 3.1 inches

1228.8 x 772.0 x 78.9 mm

77.1 lbs / 35.0 kg

71.6 lbs / 32.5 kg

MODELS

50PS30

(50PS30-UB)

Dimensions

(Width x Height

x Depth)

Weight

With stand

Without stand

With stand

Without stand

47.9 x 32.2 x 13.8 inches

1216.7 x 818.1 x 353.0 mm

47.9 x 29.8 x 3.2 inches

1216.7 x 759.0 x 83.0 mm

78.0 lbs / 35.4 kg

72.3 lbs / 32.8 kg

50PS60, 50PS60C

(50PS60-UA, 50PS60C-UA)

60PS60, 60PS60C

(60PS60-UA, 60PS60C-UA)

48.3 x 32.4 x 13.8 inches

1228.8 x 824.6 x 353.0 mm

48.3 x 30.3 x 3.1 inches

1228.8 x 772.0 x 78.9 mm

80.0 lbs / 36.3 kg

74.5 lbs / 33.8 kg

57.6 x 38.6 x 15.5 inches

1465.4 x 982.6 x 395.5mm

57.6 x 35.5 x 3.2 inches

1465.4 x 903.2 x 82.1 mm

113.0 lbs / 51.3 kg

100.3 lbs / 45.5 kg

MODEL

42PQ20

(42PQ20-UA)

40.5 x 28.3 x 12.1 inches

1031.2 x 720.9 x 308.0 mm

40.5 x 25.8 x 3.1 inches

1031.2 x 656.7 x 80.8 mm

54.6 lbs / 24.8 kg

50.0 lbs / 22.7 kg

50PQ20

(50PQ20-UA)

47.9 x 32.2 x 13.8 inches

1216.7 x 818.1 x 353.0 mm

47.9 x 29.8 x 3.2 inches

1216.7 x 759.0 x 83.0 mm

74.2 lbs / 33.7 kg

68.7 lbs / 31.2 kg

Dimensions

(Width x Height

x Depth)

Weight

With stand

Without stand

With stand

Without stand

MODELS

42PQ30, 42PQ31, 42PQ30C

(42PQ30-UA, 42PQ30-UD,

42PQ31-UD,

42PQ30C-UA

)

50PQ30, 50PQ31, 50PQ30C

(50PQ30-UA, 50PQ30-UD, 50PQ31-

UD, 50PQ30C-UA)

PRODUCT SPECIFICATIONS

42PQ60

(42PQ60-UA)

40.9 x 28.5 x 12.1 inches

1040.8 x 725.8 x 308.0 mm

40.9 x 26.3 x 3.0 inches

1040.8 x 669.2 x 76.8 mm

55.7 lbs / 25.3 kg

51.3 lbs / 23.3 kg

50PQ60

(50PQ60-UA)

50PS70

(50PS70-UG)

48.3 x 32.9x 12.1inches

1228.8 x 835.8 x 309 mm

48.3 x 30.8 x 3.1 inches

1228.8x 784.5 x 78.9 mm

84.0 lbs

38.1 kg

75.2 lbs

34.1kg

60PS70

(60PS70-UG)

57.7 x 38.9 x 14.6 inches

1465.4x 986.4 x 371 mm

57.7 x 36.7 x 3.2 inches

1465.4 x 932.2 x 82.1 mm

117.5 lbs

/53.3

102.0 lbs

46.3 kg

50PS80

(50PS80-UG)

48.3 x 32.9x 12.1inches

1228.8 x 835.8 x 309 mm

48.3 x 31.3 x 3.1 inches

1228.8x 795.1 x 78.9 mm

84.4 lbs

38.3 kg

75.6 lbs

34.3 kg

60PS80

(60PS80-UG)

57.7 x 38.9 x 14.6 inches

1465.4x 986.4 x 371 mm

57.7 x 36.5 x 3.2 inches

1465.4 x 926.7 x 82.1 mm

118.1 lbs

53.6kg

102.7 lbs

46.6kg

APPENDIX

110

APPENDIX

PROGRAMMING THE REMOTE CONTROL

(This feature is not available for all models.)

The provided universal remote control can be programmed to operate most remote-controllable devices.

Note that the remote may not control all models of other brands.

Programming a code into a remote mode

Testing your remote control.

To find out whether your remote control can operate other components without programming, turn on a

component such as a STB and press the corresponding mode button (such as a

SSTTBB

) on the remote con-

trol, while pointing at the component. Test the

PPOOWWEERR

and

CC HH

buttons to see if the component

responds correctly. If the component does not operate correctly, the remote control requires programming

to operate the device.

Turn on the component to be programmed, then press the corresponding mode button (such as

SSTTBB

) on

the remote control. The remote control button of the desired device is illuminated.

Press the

MMEENNUU

and

MMUUTTEE

buttons simultaneously, and the remote control is ready to be programmed with

the code.

Enter a code number using the number buttons on the remote control. Programming code numbers for the

corresponding component can be found on the following pages. If the code is correct, the device will turn

off.

Press the

MMEENNUU

button to store the code.

Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.

APPENDIX

111

Remote Control Code

Brand Codes Brand Codes Brand Codes

AIWA 034

AKAI 016 043 046 124

12 5 146

AMPRO 072

ANAM 031 033 103

AUDIO DYNAMICS

012 023 039 0 43

BROKSONIC 035 037 129

CANON 028 031 033

CAPEHART 108

CRAIG 003 040 135

CURTIS MATHES 031 033 041

DAEWOO 005 007 010 064

065 108 110 111

112 116 117 119

DAYTRON 108

DBX 012 023 039 043

DYNATECH 034 053

ELECTROHOME 059

EMERSON 006 017 025 027

029 031 034 035

036 037 046 101

129 131 138 153

FISHER 003 008 009 010

FUNAI 034

GE 031 033 063 072

10 7 10 9 14 4 14 7

GO VIDEO 132 136

HARMAN KARDON 012 045

HITACHI 004 018 026 034

043 063 137 150

INSTANTREPLAY 031 033

JCL 031 033

JCPENNY 012 013 015 033

040 066 101

JENSEN 043

JVC 012 031 033 043

048 050 055 060

130 150 152

KENWOOD 014 034 039 043

047 048

LG (GOLDSTAR) 001 012 013 020

101 106 114 123

LLOYD 034

LXI 003 009 013 014

017 034 101 106

MAGIN 040

MAGNAVOX 031 033 034 041

067 068

MARANTZ 012 031 033 067

069

MARTA 101

MATSUI 027 030

MEI 031 033

MEMOREX 003 010 014 031

033 034 053 072

101 102 13 4 13 9

MGA 045 046 059

MINOLTA 013 020

MITSUBISHI 013 020 045 046

049 051 059 061

151

MTC 034 040

MULTITECH 024 034

NEC 012 023 039 043

048

NORDMENDE 043

OPTONICA 053 054

PANASONIC 066 070 074 083

13 3 14 0 14 5

PENTAX 013 020 031 033

063

PHILCO 031 034 067

PHILIPS 031 033 034 054

067 071 101

PILOT 101

PIONEER 013 021 048

PORTLAND 108

PULSAR 072

QUARTZ 011 014

QUASAR 033 066 075 145

RCA 013 020 033 034

040 041 062 063

107 109 140 144

14 5 14 7

REALISTIC 003 008 010 014

031 033 034 040

053 054 101

RICO 058

RUNCO 148

SALORA 014

SAMSUNG 032 040 102 104

10 5 10 7 109 112

113 115 12 0 12 2

12 5

SANSUI 022 043 048 135

SANYO 003 007 010 014

10 2 134

SCOTT 017 037 112 129

131

SEARS 003 008 009 010

013 014 017 020

031 042 073 081

101

SHARP 031 054 149

SHINTOM 024

SONY 003 009 031 052

056 057 058 076

077 078 149

SOUNDESIGN 034

STS 013

SYLVANIA 031 033 034 059

067

SYMPHONIC 034

TANDY 010 034

TATUNG 039 043

TEAC 034 039 043

TECHNICS 031 033 070

TEKNIKA 019 031 033 034

101

THOMAS 034

TMK 006

TOSHIBA 008 013 042 047

059 082 112 131

TOTEVISION 040 101

UNITECH 040

VECTOR RESEARCH

012

VICTOR 048

VIDEO CONCEPTS

012 034 0 46

VIDEOSONIC 040

WARDS 003 013 017 024

031 033 034 040

053 054 131

YAMAHA 012 034 039 043

ZENITH 034 048 056

058 072 080 101

VCR

APPENDIX

112

APPENDIX

Brand Codes Brand Codes Brand Codes

ALPHASTAR DSR 123

AMPLICA 050

BIRDVIEW 051 126 129

CHANNEL MASTER

013 014 015 018

036 055

CHAPARRAL 008 009 012 077

CITOH 054

CURTIS MATHES 050 145

DRAKE 005 006 007 010

011 052 112 116

141

DX ANTENNA 024 046 056 076

ECHOSTAR 038 040 057 058

093 094 095 096

097 098 099 100

122

ELECTRO HOME 089

EUROPLUS 114

FUJITSU 017 021 022 027

13 3 134

GENERAL INSTRUMENT

003 004 016 029

031 059 101

HITACHI 139 140

HOUSTON TRACKER

033 037 039 051

057 104

HUGHES 068

JANIEL 060 147

JERROLD 061

KATHREIN 108

LEGEND 057

LG 001

LUTRON 132

LUXOR 062 144

MACOM 010 059 063 064

065

MEMOREX 057

NEXTWAVE 028 124 125

NORSAT 069 070

PACE SKY SATELLITE

14 3

PANASONIC 060 142

PANSAT 121

PERSONAL CABLE 117

PHILIPS 071

PICO 105

PRESIDENT 019 102

PRIMESTAR 030 110 111

PROSAT 072

RCA 066 106

REALISTIC 043 074

SAMSUNG 123

SATELLITE SERVICE CO

028 035 047 057

085

SCIENTIFIC ATLANTA

032 138

SONY 103

STARCAST 041

SUPER GUIDE 020 124 125

TEECOM 023 026 075 087

088 090 107 130

13 7

TOSHIBA 002 127

UNIDEN 016 025 042 043

044 045 048 049

078 079 080 086

101 135 136

VIEWSTAR 115

WINEGARD 128 146

ZENITH 081 082 083 084

091 120

HDSTB

DVD

Brand Codes Brand Codes Brand Codes

APEX DIGITAL 022

DENON 020 014

GE 005 006

HARMAN KARDON 027

JVC 012

LG 001 010 016 025

MAGNAVOX 013

MARANTZ 024

MITSUBISHI 002

NAD 023

ONKYO 008 017

PANASONIC 003 009

PHILIPS 013

PIONEER 004 026

PROCEED 021

PROSCAN 005 006

RCA 005 006

SAMSUNG 011 015

SONY 007

THOMPSON 005 006

TOSHIBA 019 008

YAMAHA 009 018

ZENITH 010 016 025

APPENDIX

113

■

Configuration of frame

1st frame

Repeat frame

■

Lead code

■

Repeat code

■

BBiitt ddeessccrriippttiioonn

■

FFrraammee iinntteerrvvaall:: TTff

The waveform is transmitted as long as a key is depressed.

C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Lead code Low custom code High custom code Data code Data code

Repeat code

4.5 ms

9 ms

2.25 ms

9 ms

0.55 ms

0.56 ms

1.12 ms

0.56 ms

2.24 ms

Tf Tf

Tf=108ms @455KHz

Bit ”0” Bit ”1”

1. How to Connect

■

Connect your wired remote control to the Remote Control port on the TV.

2. Remote Control IR Codes

■

Output waveform

Single pulse, modulated with 37.917KHz signal at 455KHz

Carrier frequency

FCAR = 1/TC = fOSC/12

Duty ratio = T1/TC = 1/3

IR CODES

APPENDIX

114

APPENDIX

Code

Function Note

(Hexa)

Code

Function Note

(Hexa)

D6 TV Discrete IR Code

(TV Input Selection)

C4 POWER ON Discrete IR Code

(Only Power On)

C5 POWER OFF Discrete IR Code

(Only Power Off)

5A AV1 Discrete IR Code

(AV1 Input Selection)

D0 AV2 Discrete IR Code

(AV2 Input Selection)

BF COMPONENT1 Discrete IR Code

(Component1 Input Selection)

D4 COMPONENT2 Discrete IR Code

(Component2 Input Selection)

D5 RGB-PC Discrete IR Code

(RGB-PC Input Selection)

CE HDMI1 Discrete IR Code

(HDMI1 Input Selection)

CC HDMI2 Discrete IR Code

(HDMI2 Input Selection)

E9 HDMI3 Discrete IR Code

(HDMI3 Input Selection)

DA HDMI4 Discrete IR Code

(HDMI4 Input Selection)

76 Ratio 4:3 Discrete IR Code

(Only 4:3 Mode)

77 Ratio 16:9 Discrete IR Code

(Only 16:9 Mode)

AF Ratio Zoom Discrete IR Code

(Only Zoom1 Mode)

Only 42/50PQ60, 50/60PS60,

50/60PS60C, 50/60PS70, 50/60PS80

08 POWER

Remote control Button (Power On/Off)

45 Q.MENU Remote control Button

43 MENU Remote control Button

0B INPUT Remote control Button

10-19 Number Key 0-9 Remote control Button

4C - Dash(List) Remote control Button

1A FLASHBK Remote control Button

09 MUTE Remote control Button

02 VOL + Remote control Button

03 VOL - Remote control Button

00 CH Remote control Button

01 CH Remote control Button

1E FAV Remote control Button

40 Remote control Button

41 Remote control Button

07 Remote control Button

06 Remote control Button

44 ENTER Remote control Button

28 RETURN Remote control Button

7E SIMPLINK Remote control Button

30 AV MODE Remote control Button

79 RATIO Remote control Button

65 FREEZE Remote control Button

95 ENERGY Remote control Button

AA Info Remote control Button

72 Red Remote control Button

71 Green(Stop

) Remote control Button

63 Yellow(Play

) Remote control Button

61 Blue(Pause

ll ll

) Remote control Button

8E FF

Remote control Button

8F Rew

Remote control Button

APPENDIX

115

EXTERNAL CONTROL THROUGH RS-232C

RS-232C Setup

The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer

or an A/V control system) to control the TV’s functions externally.

■

Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.

The instructions below are provided to help with programming software or to test functionality using telenet

software.

RGB IN (PC)

REMOTE

CONTROL IN

AUDIO

VIDEO

S-VIDEO

/MONO

AV IN 1

HDMI/DVI IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

Type of Connector; D-Sub 9-Pin Male

No. Pin Name

1 No connection

2 RXD

(

Receive data

)

3 TXD

(

Transmit data

)

4 DTR

(

DTE side ready

)

5 GND

6 DSR

(

DCE side ready

)

7 RTS

(

Ready to send

)

8 CTS

(

Clear to send

)

9 No Connection

Communication Parameters

■

Baud rate : 9600 bps

(

UART

)

■

Data length : 8 bits

■

Parity : None

■

Stop bit : 1 bit

■

Communication code : ASCII code

■

Use a crossed (reverse) cable.

APPENDIX

116

APPENDIX

RS-232C Configurations

Either cable below can be used.

Set ID

PC TV

RXD 2 3 TXD

TXD 3 2 RXD

GND 5 5 GND

DTR 4 6 DSR

DSR 6 4 DTR

RTS 7 8 CTS

CTS 8 7 RTS

D-Sub 9 D-Sub 9

PC TV

RXD 2 3 TXD

TXD 3 2 RXD

GND 5 5 GND

DTR 4 6 DTR

DSR 6 4 DSR

RTS 7 7 RTS

CTS 8 8 CTS

D-Sub 9 D-Sub 9

7-Wire Configuration

(

Serial female-female NULL modem cable

)

3-Wire Configurations

(

Not standard

)

Use this function to specify a TV ID number.

Refer to ‘Real Data Mapping’.

Select

OOPPTTIIOONN

Select

SSeett IIDD

Choose the desired TV ID number.

The adjustment range of Set ID is

1~99.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

Enter

Move

OPTION

Menu Language(Language): English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Demo Mode : Off

ISM Method : Normal

Set ID : 1

*Real data mapping

0 : Step 0

A : Step 10 (SET ID 10)

F : Step 15 (SET ID 15)

10 : Step 16 (SET ID 16)

63 : Step 99 (SET ID 99)

64 : Step 100

APPENDIX

117

Transmission / Receiving Protocol

TTrraannssmmiissssiioonn

[Command 1] : First command to control the set.

(j, k, m or x)

[Command 2] : Second command to control the set.

[Set ID] : You can adjust the set ID to choose desired TV ID

number in Setup menu. Adjustment range is 1

~ 99.

When selecting Set ID ‘0’, every connected the TV is

controlled. Set ID is indicated as decimal

(

~ 99

)

menu and as Hexa decimal

(

0x0

~ 0x63

)

on transmission

/receiving protocol.

[DATA] : To transmit the command data.

Transmit the ‘FF’ data to read status of command.

[Cr] : Carriage Return

ASCII code ‘0x0D’

[ ] : ASCII code ‘space (0x20)’

* In this model, TV will not send the status during the standby mode.

OOKK AAcckknnoowwlleeddggeemmeenntt

The TV transmits ACK (acknowledgement) based on this for-

mat when receiving normal data. At this time, if the data is

data read mode, it indicates present status data. If the data is

data write mode, it returns the data of the PC computer.

* In this model, TV will not send the status during the standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.

[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.

[OK] : Use the large character.

EErrrroorr AAcckknnoowwlleeddggeemmeenntt

The TV transmits ACK (acknowledgement) based on this for-

mat when receiving abnormal data from non-viable functions

or communication errors.

Data1: Illegal Code

Data2: Not supported function

Data3: Wait more time

* In this model, TV will not send the status during the standby mode.

* Data Format

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.

[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.

[NG] : Use the large character

[[CCoommmmaanndd11]][[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[DDaattaa]][[CCrr]]

[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[OOKK]][[DDaattaa]][[xx]]

[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[NNGG]][[DDaattaa]][[xx]]

Command Reference List

CCOOMMMMAANNDD11 CCOOMMMMAANNDD22

21. Channel Tuning

DATA

(Hexadecimal)

CCOOMMMMAANNDD11 CCOOMMMMAANNDD22

DATA

(Hexadecimal)

CCOOMMMMAANNDD11 CCOOMMMMAANNDD22

DATA00

(Hexadecimal)

DATA01

(Hexadecimal)

DATA02

(Hexadecimal)

DATA03

(Hexadecimal)

DATA04

(Hexadecimal)

DATA05

(Hexadecimal)

physical major major low minor high minor low attribute

program high program low

01. Power k a 00 ~ 01

02. Input Select x b (

p.118)

03. Aspect Ratio k c (

p.118)

04. Screen Mute k d 00 ~ 01

05. Volume Mute k e 00 ~ 01

06. Volume Control k f 00 ~ 64

07. Contrast k g 00 ~ 64

08. Brightness k h 00 ~ 64

09. Color k i 00 ~ 64

10. Tint k j 00 ~ 64

11. Sharpness k k 00 ~ 64

12. OSD Select k l 00 ~ 01

00 ~ 01

k m

13. Remote Control

Lock Mode

14. Treble k r 00 ~ 64

15. Bass k s 00 ~ 64

16. Balance k t 00 ~ 64

17.

Color Temperature

k u 00 ~ 02

18. ISM Method j p (

p.119)

19. Power Saving j q 00 ~ 01

20. Auto Configuration j u (

p.119)

22. Channel Add/Del m b 00 ~ 01

23. Key m c (

p.120)

APPENDIX

118

APPENDIX

0011.. PPoowweerr ((CCoommmmaanndd:: kk aa))

To control Power On/Off of the TV.

Transmission [k][a][ ][Set ID][ ][Data][Cr]

Data 00: Power Off Data 01: Power On

Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

* In a like manner, if other functions transmit ‘FF’ data

based on this format, Acknowledgement data feedback

presents status about each function.

* Note: In this model, TV will send the Acknowledge

after power on processing completion.

There might be a time delay between command and

acknowledge.

0022.. IInnppuutt SSeelleecctt ((CCoommmmaanndd:: xx bb))

To select input source for TV.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data 00: DTV (Antenna) Data 01: DTV (Cable)

Data 10: Analog (Antenna) Data 11: Analog (Cable)

Data 20: AV1 Data 21: AV2

Data 40: Component 1 Data 41: Component 2

Data 60: RGB-PC Data 90: HDMI1

Data 91: HDMI2 Data 92: HDMI3

Data 93: HDMI4(Only 42/50PQ60, 50/60PS60,

50/60PS60C, 50/60PS70, 50/60PS80)

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

0033.. AAssppeecctt RRaattiioo ((CCoommmmaanndd:: kk cc))

To adjust the screen format.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3 09: Just scan

02: 16:9 10: Cinema Zoom (1)

04: Zoom

06: Set by program 1f: Cinema Zoom (16)

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

0044.. SSccrreeeenn MMuuttee ((CCoommmmaanndd:: kk dd))

To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00: Screen mute off (Picture on), Video-Out Mute Off

Data 01: Screen mute on (Picture off)

Data 10: Video-Out Mute On

Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

* In case of Video-Out mute on only, TV will display On

Screen Display(OSD). But, In case of Screen Mute On,

TV will not display OSD.

0055.. VVoolluummee MMuuttee ((CCoommmmaanndd:: kk ee))

To control volume mute on/off.

You can also adjust mute using the MUTE button on

remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00: Volume mute on (Volume off)

Data 01: Volume mute off (Volume on)

Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

0066.. VVoolluummee CCoonnttrrooll ((CCoommmmaanndd:: kk ff))

To adjust volume.

You can also adjust volume with the volume buttons on

remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

0077.. CCoonnttrraasstt ((CCoommmmaanndd:: kk gg))

To adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

0088.. BBrriigghhttnneessss ((CCoommmmaanndd:: kk hh))

To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

0099.. CCoolloorr ((CCoommmmaanndd:: kk ii))

To adjust screen color.

You can also adjust color in the PICTURE menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

1100.. TTiinntt ((CCoommmmaanndd:: kk jj))

To adjust screen tint.

You can also adjust tint in the PICTURE menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

1111.. SShhaarrppnneessss ((CCoommmmaanndd:: kk kk))

To adjust screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

APPENDIX

119

1122.. OOSSDD SSeelleecctt ((CCoommmmaanndd:: kk ll))

To select OSD (On Screen Display) on/off.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00: OSD off Data 01: OSD on

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

1133.. RReemmoottee CCoonnttrrooll LLoocckk MMooddee ((CCoommmmaanndd:: kk mm))

To lock the remote control and the front panel controls

on the TV.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00: Lock off Data 01: Lock on

Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

If you’re not using the remote control and front panel

controls on the TV, use this mode. When main power is

on/off, remote control lock is released.

1144.. TTrreebbllee ((CCoommmmaanndd:: kk rr))

To adjust treble.

You can also adjust treble in the AUDIO menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

1155.. BBaassss ((CCoommmmaanndd:: kk ss))

To adjust bass.

You can also adjust bass in the AUDIO menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

1166.. BBaallaannccee ((CCoommmmaanndd:: kk tt))

To adjust balance.

You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116 .

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

1177.. CCoolloorr TTeemmppeerraattuurree ((CCoommmmaanndd:: kk uu))

To adjust color temperature.

You can also adjust color temperature in the PICTURE menu.

Transmission [k][u][ ][Set ID][ ][Data][Cr]

Data 00: Medium 01: Cool 02: Warm

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

1188.. IISSMM MMeetthhoodd ((CCoommmmaanndd:: jj pp))

To avoid having a fixed image remain on screen.

Transmission [ j ][p][ ][Set ID][ ][Data][Cr]

Data 02: Orbiter 04: White Wash

08: Normal 20: Color Wash

Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]

1199.. PPoowweerr ssaavviinngg ((CCoommmmaanndd:: jj qq))

To control the low power function on/off.

Transmission [ j ][q][ ][Set ID][ ][Data][Cr]

Data 00: Energy Saving off

01: Energy Saving: Minimum

02: Energy Saving: Medium

03: Energy Saving: Maximum

10: Intelligent Sensor: Low

11: Intelligent Sensor: Middle

12: Intelligent Sensor: High

Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

2200.. AAuuttoo CCoonnffiigguurraattiioonn ((CCoommmmaanndd:: jj uu))

To adjust picture position and minimize image shaking

automatically. Auto configuration only works in RGB-PC

mode.

Transmission [ j ][u][ ][Set ID][ ][Data][Cr]

Data 1: To set

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

2211.. CChhaannnneell TTuunniinngg ((CCoommmmaanndd:: mm aa))

To tune channel to following physical/major/minor number.

Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor channel

number. The Physical number is the actual digital channel

number, the Major is the number that the channel should

be mapped to, and the Minor is the sub-channel. Since

the ATSC tuner automatically maps the channel to the

Major number, the Physical number is not required when

sending a command.

Data 00: Physical Channel Number

NTSC air: 02~45, NTSC cable: 01, 0E~7D

ATSC air: 01~45, ATSC cable: 01~87

Data 01 & 02: Major Channel Number

Data 01: High byte Data 02: Low byte

Two bytes are available for the Major and Minor, nor-

mally only the second byte is used.

Data 03 & 04: Minor Channel Number

Not needed for NTSC.

APPENDIX

120

APPENDIX

Data 05:

The table above lists the binary code which must be

converted to Hexadecimal before sending. For example:

The binary code to tune the sub source to an NTSC

cable channel is “1000 0001”, which translates to “81”

in Hex.

* 7th bit : For which source do you want to change the

channel.

* 6th bit: Use a two part or one part channel. Most cases

just use 0 since it’s ignored when using NTSC.

* 5th bit: Use 0 with NTSC since it can only use the phys-

ical channel number. Normally use 1 for ATSC since most

times it doesn’t matter what the physical number is.

* 4th bit: Set to 0.

* 3-0 bits: Choose signal type.

* Tune Command Examples:

1. Tune to the analog (NTSC) cable channel 35.

Data 00 = Physical of 35 = 23

Data 01 & 02 = No Major = 00 00

Data 03 & 04 = No Minor = 00 00

Data 05 = 0000 0001 in binary = 01

Total = ma 00 23 00 00 00 00 01

2. Tune to the digital (ATSC) local channel 30-3.

Data 00 = Don’t know Physical = 00

Data 01 & 02 = Major is 30 = 00 1E

Data 03 & 04 = Minor is 3 = 00 03

Data 05 = 0010 0010 in binary = 22

Total = ma 00 00 00 1E 00 03 22

Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01]

[Data02][Data03][Data04][x][a][ ][Set ID]

[ ][NG][Data00][x]

2222.. CChhaannnneell AAdddd//DDeell ((CCoommmmaanndd:: mm bb))

To add and delete the channels.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00: Channel Delete Data 01: Channel Add

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

2233.. KKeeyy ((CCoommmmaanndd:: mm cc))

To send IR remote key code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

p.114 .

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

Step

NTSC Air

NTSC Cable

ATSC Air

ATSC Cable_std

ATSC Cable_hrc

ATSC Cable_irc

ATSC cable_auto

Reserved

...

Reserved

Use

No Use

Using Physical

Channel

Two

One

Two/One

Part Channel

Main

Sub

Main/Sub

Picture

LG Electronics 60PS60 60” Class Full HD 1080p Plasma TV (59.5” diagonal)

Product's Documents

User Manual

Specifications

LG Electronics 60PS60 Questions and Answers

Related Products

LG Electronics 60PM9700 60” Class Full HD 1080p Plasma TV (59.8” diagonal)

LG Electronics 60PA5500 60” Class Full HD 1080p Plasma TV

LG Electronics 60PA6500 60” Class Full HD 1080p Plasma TV (59.8” diagonally)

LG Electronics 60PK750 60” Class Broadband Full HD 1080p Plasma TV