Loading ...
Loading ...
Loading ...
80
MAINTENANCE
Rear Gearcase Fluid (800 EFI)
Fluid Recommendations
Fluid Level
1. Position the vehicle on a level
surface.
2. Place the transmission in PARK.
3. Remove the fill plug.
NOTE: Use a light colored non-absor-
bent object (such as a cable tie,
L-shaped wire or a small L-
shaped tool) to measure the oil
level.
4. Insert the measuring object into
the fill plug hole with the short
end pointing downward. Guide
the object (at a slight angle
downward and to the left)
approximately 5 cm into the left side of the gearcase. Remove it and
verify that oil is present on the tip.
• If oil is present, do not add oil.
• If oil is not present, add 5-10 ml of the recommended oil.
5. After adding oil, recheck the oil level. Add more oil as needed until
oil appears on the tip of the measuring object. Do not overfill.
6. Reinstall the fill plug.Torque to specification.
Lubricant Capacity Fill Plug
To r q u e
Drain Plug
To r q u e
ATV Angle Drive Fluid
(or GL5 80-90 weight gear lube)
150 ml 19 N-m 19 N-m
Measuring Tool
Loading ...
Loading ...
Loading ...