Loading ...
Loading ...
Loading ...
5
SAFETY INSTRUCTIONS
Power
WARNING
The appliance plug is used as the
disconnect device.
- Please make sure the device is
installed near the wall outlet to which
it is connected and that the outlet is
easily accessible.
The grounding wire should be
connected.
- Ensure that you connect the
grounding cable to avoid electric
shock.
If it is not possible to ground the unit,
have a qualied electrician install a
separate circuit breaker.
Do not try to ground the projector
by connecting it to telephone wires,
lightning rods, or gas pipes.
The power plug should be inserted
fully into the power outlet.
- An unstable connection may cause
a fire.
Do not place heavy objects on the
power cord.
- This may result in fire or electric
shock.
Never touch the power plug with wet
hands.
- This may result in electric shock.
Do not plug too many devices into
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
Keep the AC adapter, power plug,
and the used power outlet clean from
dust or foreign materials building up.
- This may result in fire.
If there is any smoke or a burning
smell from the projector or AC
adapter, stop using the product
immediately. Disconnect the power
cord from the power outlet, and then
contact the customer service center.
- This may result in fire.
To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
CAUTION
Always grab the plug to remove the
AC adapter or power cord.
- Otherwise, this may result in a fire
or may damage the product.
Refrain from constantly bending the
power cord of the AC adapter.
- If the power cord is bent excessively
for a long period of time, the cord
may break inside. This may result in
a fire or electric shock.
Ensure the power cord and plug are
not damaged, modified, severely
bent, twisted, pulled, sandwiched
or hot. Do not use the product if the
power outlet is loose.
- This may result in fire or electric shock.
Keep the power cord away from heating
devices.
-
The wire's sheath may melt, which
may result in fire or electric shock
.
Place the projector where people will
not trip over or step on the power
cord to protect the power cord and
plug from any damage.
- This may result in fire or electric shock.
Loading ...
Loading ...
Loading ...