Loading ...
Loading ...
Loading ...
15
TROUBLESHOOTING
First try the solutions suggested here for assistance and to possibly avoid a service call.
If you experience Possible Causes Solution
Dryer Results (cont.)
Cycle time is too short The sensor cycle is ending early. Change the dryness level setting on sensor cycles. Increasing or
decreasing the dryness level will change the amount of drying
time in a cycle.
Lint on load Lint screen is clogged with lint. Clean lint screen before each load.
Stains on load Improper use of fabric softener. Add dryer fabric softener sheets at the beginning of the cycle.
Fabric softener sheets added to a partially dried load can stain
your garments.
Stains on drum Loose dyes in clothes. Drum stains are caused by unstable dyes in clothing (usually blue
jeans). These will not transfer to other clothing. Dry unstable dye
items like blue jeans inside-out to avoid transfer of dye to drum.
Loads are wrinkled The load was not removed from dryer
at the end of the cycle.
Refer to garment care label instructions. Dry-clean-only garments
are not recommended.
The dryer was tightly packed. Dry smaller loads that can tumble freely.
Odors Recent painting, staining, or varnishing
in the area where your dryer is
located.
Ventilate the area. When the odors or fumes are gone from the
area, rewash and dry the clothing.
Dryer being used for the rst time. The new electric heating element may have an odor. The odor will
be gone after the rst cycle.
Accessory
For ordering information, see the back page.
Part Number Accessory
49971 Compact dryer stand – white
Loading ...
Loading ...