Loading ...
Loading ...
Loading ...
Instructions for the installer
19
3.2 Positioning and levelling the appliance
Place the appliance on a firm, level surface.
To compensate for
any unevenness in the floor, the appliance has four adjustable feet.
This gives it added stability and makes it easier to move around and
position. Take great care
when moving the appliance not to
damage the floor (for example, when inst
alling on a parquet floor).
3.3 Electrical connection
Connect the appliance's power supply lead to a mains socket with earth contact, installed in accordance
with electrical safety regulations. The rated voltage and frequency are stated
on the nameplate inside the
appliance. The appliance must be connected to the electrical mains and earthed in compliance with the
relevant regulations and requirements. The appliance can tolerate fluctuations in voltage of between -
15%
and +10% of the nominal value indicated on the data plate.
If the power supply lead has to be replaced,
this operation must only be carried out by an authorised Smeg technical service engineer.
The power
plug must be accessible after the appliance has been installed.
Loading ...
Loading ...
Loading ...