Loading ...
Loading ...
Loading ...
Getting Started8
Getting Started
1
Charging the Unit
Connecting the AC adapter
This device uses a built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
AC Adapter
AC power cord
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
>
Caution
Checking the charging status
When AC Adapter is connected, battery charging
is started. You can check the charging status with
1/!
button. (Refer to the page 22 for details)
y
Charging : The
1/!
button blinks red or white.
y
Fully charged : The
1/!
button turns red or
white.
y
Deactivate AirPlay feature
Operating time is approx. 10 hours. (Based
on 30 % volume, 1 kHz signal, 500 mV
portable input and fully charged status)
y
Activate AirPlay feature
Operating time is approx. 5 hours. (Based on
30 % volume, 1 kHz signal, 500 mV portable
input and fully charged status)
It may vary depending on the battery status
and operational conditions.
,
Note
Battery protection
When AC Adapter is connected, if the unit is in high
or low temperature, the battery may not function
properly. Please reference the table below to fully
understand the battery protection feature.
In this case, use the unit in proper place where the
temperature or humidity is not so high or low.
Battery temperature : Very low
Power
O
(Red) (White)
Warning
Battery temperature : Very High
Power
On
(Red) (White) (O )
Blinks
10 sec
NP6630-A0.BGBRLLK_MFL67789408.indd 8 2013-05-27 12:25:46
Loading ...
Loading ...
Loading ...