3-Way Wiring - DDS15 Switch with DD0SR-01Z Coordinating
Remote Application:
3-Way Wiring - DDL06 Dimmer with DD0SR-01Z Coordinating Remote
Application:
3-Way Wiring - DDL06 Dimmer with DD0SR-01Z Coordinating
Remote Application:
DI-000-DD0SR-02A
TOOLS NEEDED TO INSTALL YOUR REMOTE
Slotted/Phillips Screwdriver Electrical Tape Pliers
Pencil Cutters Ruler
INSTALLING YOUR REMOTE
NOTE: Use check boxes when Steps are completed.
ONOFF
ONOFF
ONOFF
ONOFF
ONOFF
ONOFF
ONOFFONOFF
ONOFF
ONOFF
ONOFF
ONOFF
WARNING: TO AVOID FIRE, SHOCK OR DEATH; TURN
OFF POWER at circuit breaker or fuse and test that power
is off before wiring!
Step 1
INTRODUCTION
Decora
®
Digital Remotes are designed to provide multi-location control of
Decora Digital Dimmers and Switches. Decora
®
Digital Dimmers and Switches
with Bluetooth
®
represent the next generation of lighting control technology.
This innovative device works using the Leviton Decora
®
Digital Dimmer &
Timer app that can be easily downloaded to smartphones or tablets and paired
to the Leviton Dimmer using Bluetooth
®
technology. Decora
®
Digital Devices
give users point-to-point local control to automate lighting, bridging the gap
between standard dimmers and whole-house automation systems.
The Decora
®
Digital Dimmer is a powerful device – combining the best
of Leviton dimmer and timer functions with today’s mobile technology for
impressive results. The simple touch of a finger following the intuitive on-
screen guide makes it more convenient than ever to manage lighting for home
activities or to ensure a "lived-in" look while away. Plus, the Decora
®
Digital
Dimmer is Universal and compatible with LED, CFL or Incandescent bulbs.
The Decora
®
Digital Switch combines the functions of a standard wall switch
and a countdown or programmable timer switch in one attractive device.
Use of the app allows greater flexibility for accurate timer functionality and
makes pushing buttons for timed events a tedious chore of the past.
The Leviton Decora
®
Digital Dimmer & Timer app can be easily downloaded
to mobile devices and is compatible with Android and iOS smartphones or
tablets. The app is easy to use with simple, intuitive on-screen menu options
to independently control dimmers and switches throughout the home.
Decora
®
Digital Devices are ideal for living rooms, bedrooms, kitchens, dining
rooms, home offices, outdoor lighting or anywhere full control of lighting is
desired.
• Three way communication
• Ease of installation – No new wiring
FEATURES
Side Wire Connection
Side wire terminals accept
#14-12 AWG solid copper
wire only.
Back Wire Connection
Back wire openings accept
#14-12 AWG solid copper
wire only.
Preparing and connecting wires:
This remote can be wired using side wire terminal screws or
through backwire openings.
Step 3
5/8"
(1.6 cm)
Strip Gage
(measure bare
wire here)
3-Way or More Applications (Multi-location)
Universal Coordinating Switching Remote
Cat. No. DD0SR-01Z - 120VAC, 60Hz
INSTALLATION INSTRUCTIONS
WARNINGS AND CAUTIONS:
• TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
• To be installed and/or used in accordance with electrical codes and regulations.
• If you are unsure about any part of these instructions, consult an electrician.
• Decora
®
Digital remotes are not compatible with standard 3-way or 4-way switches. They must be used with compatible Decora
®
Digital devices
for multi-location switching.
WARNINGS AND CAUTIONS:
• Use this device WITH COPPER OR COPPER CLAD WIRE ONLY.
• Use only one (1) Decora
®
Digital dimmer or switch in a multi-location circuit with up to 9 coordinating remotes.
NOTE: The remote(s) will turn the light on at the brightness level selected at the dimmer.
• Recommended minimum wall box depth for remotes is 2-1/2".
• Maximum wire length from dimmer or switch to all installed remotes cannot exceed 300 ft (90 m).
6
5
4
1
2
3
2
5
4
3
1
4-Way
1. First Traveler (note color)
2. Second Traveler (note color)
3. Neutral
4. Ground
5. Third Traveler (note color)
6.
Fourth Traveler (note color)
NOTE: The first and third traveler
wires are used to carry line power
to the other switch boxes.
3-Way
1. Line or Load (Tagged)
2. Neutral
3. Ground
4. First Traveler (note color)
5. Second Traveler (note color)
NOTE: The first traveler wire is
used to carry line power to the
other switch box.
Identifying your wiring application
(most common):
NOTE: If the wiring in the wall box does not resemble
any of these configurations, consult an electrician.
Step 2
IMPORTANT:
For 3-Way applications, note that one of the screw terminals from the old
switch being removed will usually be a different color (Black) or labeled
Common. Tag that wire with electrical tape and identify as the common
(Line or Load) in both the dimmer wall box and remote wall box.
For 4-Way applications, note that the old switch being removed will have
4 screws plus a ground screw. Tag the two wires connected to the two back
screw terminals.
Changing the color of your Remote:
Your remote may include color options. To change color of the face proceed
as follows:
1
2
Insert top tabs
and press in
bottom tabs to
attach
Push in sides at
bottom tabs and
pull outward to
release
• Make sure that the ends of the wires from the wall box are
straight (cut if necessary).
• Remove insulation from wires in the wall box as shown.
Cut
(if necessary)
Step 4a
Step 4b
Step 4b
Green
Ground
Green
Ground
Hot (Black)
Neutral (White)
DD0SR-01Z Coordinating Remote
YL/RD
YL/RD
RD
WH
RD
BK
Black
BK
WH
White
Line
120 VA
C
60Hz
(unused)
(unused)
Load
DDS15 Switch
Green
Ground
Green
Ground
Hot (Black)
Neutral (White)
DD0SR-01Z Coordinating Remote
YL/RD
YL/RD
RD
RD
BK
Black
BK
WH
White
Line
120 VAC
60Hz
(unused)
(unused)
Load
DDL06 Dimmer
DDS15 Switch
DD0SR-01Z
Coordinating Remote
Terminal
Screw
marked
Black (BK)
Terminal
Screw marked
Red (RD)
Terminal
Screw marked
White (WH)
Terminal
Screw
marked
Yellow/Red
(YL/RD)
Terminal
Screw marked
Red (RD)
2
4
2
4
1
WH
BK
RD
YL/RD
WH
BK
RD
YL/RD
1
Neutral to Terminal
Screw marked
White (WH)
3 3
5 5
Terminal
Screw
marked
Black (BK)
Terminal
Screw
marked
Y
ellow/Red
(YL/RD)
DD0SR-01Z
Coordinating Remote
Terminal
Screw marked
Red (RD)
2
4
1
WH
BK
RD
YL/RD
Neutral to Terminal
Screw marked
White (WH)
3
5
Terminal
Screw
marked
Black (BK)
Terminal
Screw
marked
Y
ellow/Red
(YL/RD)
DDL06 Dimmer
Terminal
Screw
marked
Black
(BK)
Terminal
Screw marked
Red (RD)
Terminal
Screw
marked
Yellow/
Red
(YL/RD)
4
BK
RD
YL/RD
1
3
5
2
NOTE: The DD0SR-01Z coordinating remote must be installed in a wall box with a Neutral connection.
WIRING DD0SR-01Z COORDINATING REMOTE (wall box with load connection):
Connect wires per WIRING DIAGRAM as follows:
NOTE: "BK" and "RD" terminals on coordinating remote are unused. Tighten both screws.
• Green or bare copper wire in wall box to Green terminal screw.
• Load wall box wire identified (tagged) when removing old switch to First Traveler (note color as above).
• Second Traveler wall box wire (note color as above) to terminal screw marked
"YL/RD". This traveler from the remote must go to the terminal screw on the switch marked "YL/RD".
• Neutral wall box wire to terminal screw marked "WH".
WIRING DDS15 SWITCH (wall box with line hot connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• Line Hot (common) wall box wire identified (tagged) when removing old switch to terminal screw marked "BK".
• First Traveler wall box wire to terminal screw marked "RD" (note wire color).
• Remove Red insulating label from terminal screw marked "YL/RD".
• Second Traveler wall box wire to terminal screw marked "YL/RD" (note wire color). This traveler from the
switch must go to the terminal screw on the remote marked "YL/RD".
• Neutral wall box wire to terminal screw marked "WH".
• Proceed to Step 5.
NOTE: The DDL06 dimmer must be installed in a wall box that has a Load connection. The DD0SR-01Z
coordinating remote must be installed in a wall box with a Neutral connection.
WIRING DD0SR-01Z COORDINATING REMOTE (wall box with load connection):
Connect wires per WIRING DIAGRAM as follows:
NOTE: "BK" and "RD" terminals on coordinating remote are unused. Tighten both screws.
• Green or bare copper wire in wall box to Green terminal screw.
• Load wall box wire identified (tagged) when removing old switch to First Traveler (note color as above).
• Second Traveler wall box wire (note color as above) to terminal screw marked "YL/RD". This traveler from
the remote must go to the terminal screw on the dimmer marked "YL/RD".
• Line Neutral wall box wire to terminal screw marked "WH".
WIRING DDL06 DIMMER (wall box with line hot connection):
Connect wires per WIRING DIAGRAM as follows:
• Green or bare copper wire in wall box to Green terminal screw.
• Line Hot (common) wall box wire identified (tagged) when removing old switch to terminal screw marked "BK".
• First Traveler wall box wire to terminal screw marked "RD" (note wire color).
• Remove Red insulating label from terminal screw marked "YL/RD".
• Second Traveler wall box wire to terminal screw marked "YL/RD" (note wire color). This traveler from the
dimmer must go to the terminal screw on the remote marked "YL/RD".
• Proceed to Step 5.
3-Way Wiring - DDL06 Dimmer with DD0SR-01Z Coordinating Remote
(no neutral) Application:
Step 4c
DD0SR-01Z
Coordinating Remote
Terminal
Screw marked
Red (RD)
2
WH
BK
RD
YL/RD
3
5
Terminal
Screw
marked
Black (BK)
Terminal
Screw
marked
Y
ellow/Red
(YL/RD)
DDL06 Dimmer
Terminal
Screw
marked
Black
(BK)
Terminal
Screw marked
Red (RD)
Terminal
Screw
marked
Yellow/
Red
(YL/RD)
4
BK
RD
YL/RD
1
3
5
2
4
1
Green
Ground
Green
Ground
Hot (Black)
Neutral (White)
DD0SR-01Z
Coordinating Remote
YL/RD
YL/RD
RD
RD
BK
Black
BK
WH
White
Line
120 VAC
60Hz
Load
DDL06 Dimmer
(unused)
Loading ...
Loading ...
